Sittings · Document
Establishing the Temporary Decarbonisation Fund
Committee on the Environment, Climate and Food Safety
Amendment 373
Adrian-George Axinia
Proposal for a regulation
Annex – table – subheading -1 (new) with new CN
| Cement | |
| Text proposed by the Commission | |
| Amendment | |
| Cement | |
| CN code | Description |
| 2523 | Core Cement Products |
Or. en
Amendment 374
Michalis Hadjipantela
Proposal for a regulation
Annex – table – subheading -1 (new) with new CNs
| Cement | |
| Text proposed by the Commission | |
| Amendment | |
| Cement | |
| CN code | Description |
| 25231000 | Cement clinkers |
| 25232900 | Portland cement (excl. white, whether or not artificially coloured) |
| 25233000 | Aluminous cement |
| 25239000 | Other hydraulic cements |
| 25232100 | White portland cement, whether or not artificially coloured |
Or. en
Amendment 375
Daniel Buda, Ioan Rareș Bogdan
Proposal for a regulation
Annex – table – subheading -1 (new) with new CN
| Cement | |
| Text proposed by the Commission | |
| Amendment | |
| Cement | |
| CN code | Description |
| 2523 | Hydraulic cements (including Portland cement, aluminous cement, slag cement and similar cements), whether coloured or not or in the form of clinker |
Or. ro
Amendment 376
Stefano Cavedagna, Nicola Procaccini, Pietro Fiocchi, Michele Picaro, Antonella Sberna, Paolo Inselvini, Aureljius Veryga
Proposal for a regulation
Annex – table – subheading -1 (new) with new CNs
| Cement | |
| Text proposed by the Commission | |
| Amendment | |
| Cement | |
| CN code | Description |
| 25231000 | Cement clinkers |
| 25232100 | White Portland cement, whether or not artificially coloured |
| 25232900 | Portland cement (excl. white, whether or not artificially coloured |
| 25233000 | Aluminous cement |
| 25239000 | Cement, whether or not coloured (excl. Portland cement and aluminous cement) |
Or. en
Amendment 377
Radan Kanev
Proposal for a regulation
Annex – table – subheading -1 (new) with new CNs
| Combined Metal Products | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Combined Metal Products | |
| CN code | Description |
| 8422 11 | Dishwashing machines, household type |
| 8450 20 | Washing machines, dry linen capacity >10 kg |
| 8451 29 | Other drying machines, exceeding 10 kg |
| 8418 21 | Refrigerators, household type, compression-type |
| 8418 29 | Refrigerators, household type, other |
| 8418 30 | Freezers of the chest type, not exceeding 800 litres |
| 8418 40 | Freezers of the upright type, not exceeding 900 litres |
| 8414 60 | Ventilating or recycling hoods incorporating a fan |
| 8516 60 80 | Ovens for building in |
| 8516 60 10 | Cookers incorporating at least an oven and a hob |
| ex 8516 60 50 | Cooking plates, boiling rings and hobs designed for fixed installation |
| 8516 10 | Electric instantaneous or storage water heaters and immersion heaters |
| 8419 19 | Other instantaneous or storage water heaters, non-electric |
| 8419 12 | Solar water heaters |
| ex 8418 61 | Heat pump water heaters |
| 8516 29 10 | Liquid-filled radiators |
| 8516 29 50 | Convection heaters |
| ex 8508 11 00 | Vacuum cleaners excluding robot vacuum cleaners |
Or. en
Amendment 378
Adam Jarubas
Proposal for a regulation
Annex – table – subheading -1 (new)
| Cement | |
| Text proposed by the Commission | |
| Amendment | |
| Cement | |
| CN code | Description |
Or. en
Amendment 379
Michalis Hadjipantela
Proposal for a regulation
Annex – table – subheading 1 with new CNs
| Aluminium | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Aluminium | |
| CN code | Description |
| 7601 | Unwrought aluminium |
| 7604 | Aluminium bars, rods and profiles |
| 7605 | Aluminium wire |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm |
| 7610 | Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures. |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0.2mm |
Or. en
Amendment 380
Daniel Buda, Ioan Rareș Bogdan
Proposal for a regulation
Annex – table – subheading 1 with new CNs
| Aluminium | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Aluminium | |
| CN code | Description |
| 7601 | Unwrought aluminium |
| 7604 | Aluminium bars and profiles |
| 7605 | Aluminium wire |
| 7606 | Aluminium plates, sheets and strip, of a thickness greater than 0,2 mm |
Or. ro
Amendment 381
Stefano Cavedagna, Nicola Procaccini, Pietro Fiocchi, Michele Picaro, Antonella Sberna, Paolo Inselvini, Aureljius Veryga
Proposal for a regulation
Annex – table – subheading 1 with new CNs
| Aluminium | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Aluminium | |
| CN code | Description |
| 7601 | Unwrought aluminium |
| 7604 | Aluminium bars, rods, and profiles |
| 7605 | Aluminium wire |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm |
| 7610 | Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures |
Or. en
Amendment 382
Stefano Cavedagna, Nicola Procaccini, Pietro Fiocchi, Michele Picaro, Antonella Sberna, Paolo Inselvini, Aureljius Veryga
Proposal for a regulation
Annex – table – subheading 3 with new CNs
| Iron and Steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and Steel | |
| CN code | Description |
| 72061000 | Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) |
| 72071290 | Semi-finished products of iron or non-alloy steel, containing by weight = twice the thickness, forged |
| 72071912 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting |
| 72071980 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) |
| 72072017 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) |
| 72072039 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular ‘other than square’ cross-section and the width >= twice the thickness, forged |
| 72081000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process |
| 72082600 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, pickled, without patterns in relief |
| 72082700 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, pickled, without patterns in relief |
| 72085120 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief |
| 72085191 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief (excl. ‘wide flats’) |
| 72085198 | Flat-rolled products of iron or non-alloy steel, of a width of = 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief |
| 72085200 | Flat-rolled products of iron or non-alloy steel, of a width of = 4,75 mm but <= 10 mm, without patterns in relief |
| 72085299 | Flat-rolled products of iron or non-alloy steel, of a width of = 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width <= 1.250 mm) |
| 72085310 | Flat-rolled products of iron or non-alloy steel, of a width of = 4 mm but < 4,75 mm, without patterns in relief |
| 72085400 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief |
| 72089020 | Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated, perforated |
| 72091500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 3 mm |
| 72091690 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) |
| 72091790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl. electrical) |
| 72091891 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,35 mm but < 0,5 mm (excl. electrical) |
| 72091899 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of < 0,35 mm (excl. electrical) |
| 72092500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 3 mm |
| 72092690 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) |
| 72092790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl. electrical) |
| 72099020 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, perforated |
| 72099080 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, non-perforated |
| 72101100 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, tinned, of a thickness of >= 0,5 mm |
| 72101220 | Tinplate of iron or non-alloy steel, of a width of >= 600 mm and of a thickness of = 97% of tin], not further worked than surface-treated |
| 72101280 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with tin, of a thickness of < 0,5 mm (excl. tinplate) |
| 72102000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with lead, incl. terne-plate |
| 72105000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with chromium oxides or with chromium and chromium oxides |
| 72107010 | Tinplate of a width of >= 600 mm and of a thickness of = 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, varnished |
| 72109040 | Flat-rolled products of iron or non-alloy steel, tinned and printed, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ |
| 72109080 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled ‘cold-reduced’, of a width of >= 600 mm, plated or coated (excl. plated or coated with thin, lead ‘incl. terne-plate’, zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed) |
| 72112380 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm and of a thickness of < 0,35 mm, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, containing by weight < 0,25% of carbon (excl. electrical plate) |
| 72112900 | Flat-rolled products of iron or non-alloy steel, of a width of = 0,25% of carbon |
| 72119020 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, perforated |
| 72119080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coatednon-perforated |
| 72121090 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled ‘cold-reduced’, of a width of < 600 mm, tinned (excl. tinplate, not further worked than surface-treated) |
| 72122000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, electrolytically plated or coated with zinc |
| 72123000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, tinned (excl. electrolytically plated or coated with zinc) |
| 72124020 | Tinplate of a width of = 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, varnished |
| 72124080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, painted, varnished or plastic coated (excl. tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) |
| 72125030 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with chromium or nickel |
| 72125040 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with copper |
| 72125061 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with aluminium-zinc alloys |
| 72125069 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys) |
| 72125090 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad (excl. products plated or coated with tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic-coated) |
| 72126000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad |
| 72131000 | Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process |
| 72132000 | Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) |
| 72139120 | Bars and rods, hot-rolled, of the type used for tyre cord, smooth, of iron or non-alloy steel, in irregularly wound coils |
| 72139120 | Bars and rods, hot-rolled, of the type used for tyre cord, smooth, of iron or non-alloy steel, in irregularly wound coils |
| 72149995 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel) |
| 72151000 | Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished |
| 72155011 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon of rectangular ‘other than square’ cross-section (excl. those of free-cutting steel) |
| 72155080 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight >= 0,25% of carbon (excl. those of free-cutting steel) |
| 72159000 | Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. |
| 72163110 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm |
| 72163190 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm |
| 72163211 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm |
| 72163219 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm (excl. 7216.32.11) |
| 72163291 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm |
| 72163299 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm (excl. 7216.32.91) |
| 72163310 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 180 mm |
| 72163390 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 180 mm |
| 72165099 | Profile of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded (other than with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm, and U-, I-, H-, L- or T-sections and ribbed sections (ribbed steel)) |
| 72166900 | Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) |
| 72171090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods) |
| 72172090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with zinc (excl. bars and rods) |
| 72173041 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, copper-coated (excl. bars and rods) |
| 72173049 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated with base metals (excl. products plated or coated with zinc or copper and bars and rods) |
| 72173090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with base metals (excl. products plated or coated with zinc, and bars and rods) |
| 72179020 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated (excl. products plated or coated with base metals and bars and rods) |
| 72179090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated (excl. products plated or coated with base metals, and bars and rods) |
| 72181000 | Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) |
| 72189110 | Semi-finished products of stainless steel, of rectangular ‘other than square’ cross-section, containing by weight >= 2,5% nickel |
| 72189180 | Semi-finished products of stainless steel, of rectangular ‘other than square’ cross-section, containing by weight < 2,5 nickel |
| 72189919 | Semi-finished products of stainless steel, of square cross-section, forged |
| 72189920 | Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting |
| 72189980 | Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) |
| 72191390 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5 nickel |
| 72192210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but = 2,5% nickel |
| 72192290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5% nickel |
| 72192300 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm |
| 72192400 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm |
| 72193100 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 4,75 mm |
| 72193210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 3 mm but = 2,5% nickel |
| 72193290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5% nickel |
| 72193510 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of = 2,5% nickel |
| 72199020 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, perforated |
| 72199080 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, non-perforated |
| 72202021 | Flat-rolled products of stainless steel, of a width of = 3 mm and containing by weight >= 2,5% nickel |
| 72202029 | Flat-rolled products of stainless steel, of a width of = 3 mm and containing by weight < 2,5% nickel |
| 72202041 | Flat-rolled products of stainless steel, of a width of 0,35 mm but = 2,5% nickel |
| 72202049 | Flat-rolled products of stainless steel, of a width of 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel |
| 72202081 | Flat-rolled products of stainless steel, of a width of = 2,5% nickel |
| 72202089 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of <= 0,35 mm and containing by weight < 2,5% nickel |
| 72209020 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, perforated |
| 72209080 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, non-perforated |
| 72210010 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight >= 2,5% nickel |
| 72210090 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight < 2,5% nickel |
| 72221111 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel |
| 72221119 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickel |
| 72221181 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring = 2,5% nickel |
| 72221189 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickel |
| 72221910 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) |
| 72221990 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight < 2,5% nickel (excl. such products of circular cross-section) |
| 72222011 | Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel |
| 72222019 | Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight < 2,5% nickel |
| 72222021 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but = 2,5% nickel |
| 72222021 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but = 2,5% nickel |
| 72222029 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel |
| 72222031 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring = 2,5% nickel |
| 72222039 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickel |
| 72222081 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) |
| 72222089 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section) |
| 72223091 | Other bars and rods of stainless steel, containing by weight < 2,5% of nickel, forged |
| 72224010 | Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded |
| 72224090 | Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. |
| 72230011 | Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excl. bars and rods) |
| 72230019 | Wire of stainless steel, in coils, containing by weight >= 2,5% nickel (excl. such products containing 28% to 31% nickel and 20% to 22% chromium, and bars and rods) |
| 72230091 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel, 13% to 25% chromium and 3,5% to 6% aluminium (excl. bars and rods) |
| 72230099 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel (excl. such products containing 13% to 25% chromium and 3,5% to 6% aluminium, and bars and rods) |
| 72241010 | Ingots and other primary forms, of tool steel |
| 72241090 | Steel, alloy, other than stainless, in ingots or other primary forms (excl. of tool steel, waste and scrap in ingot form and products obtained by continuous casting) |
| 72249031 | Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting |
| 72249038 | Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) |
| 72251100 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented |
| 72251990 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’, non-grain-oriented |
| 72253010 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils |
| 72253090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
| 72254012 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils |
| 72254015 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils |
| 72254040 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
| 72254060 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
| 72254090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
| 72255020 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’ |
| 72255080 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’ (excl. products of high-speed steel or silicon-electrical steel) |
| 72259100 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) |
| 72259200 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) |
| 72259900 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) |
| 72261100 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, grain-oriented |
| 72261910 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled |
| 72262000 | Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ |
| 72269120 | Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolled |
| 72269199 | Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of < 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) |
| 72269200 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled ‘cold-reduced’ (excl. products of high-speed steel or silicon-electrical steel) |
| 72271000 | Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils |
| 72279095 | Bars and rods, hot-rolled, in irregularly wound coils of alloy steel other than stainless (excl. of high-speed steel or silico-manganese steel and bars and rods of subheadings 72279010 and 72279050) |
| 72281020 | Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72281050 | Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72281090 | Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72282099 | Bars and rods of silico-manganese steel, of square or other than rectangular cross-section, only cold-formed or cold-finished, incl. further worked, or hot-rolled and further worked (excl. hot-rolled, hot drawn or extruded, not further worked than clad, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72283020 | Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72283069 | Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 72283049 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72283089 | Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72283049 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72284010 | Bars and rods of tool steel, only forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72285020 | Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72285040 | Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72285061 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72285069 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72285080 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excl. of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72286020 | Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
| 72287010 | Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded |
| 72287090 | Angles, shapes and sections of alloy steel other than stainless, n.e.s. (excl. products not further worked than hot-rolled, hot-drawn or extruded) |
| 72288000 | Hollow drill bars and rods, of alloy or non-alloy steel |
| 72292000 | Wire of silico-manganese steel, in coils (excl. bars and rods) |
| 72299050 | Wire of steel containing by weight 0,9% to 1,1% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, in coils (excl. rolled bars and rods) |
| 72299090 | Wire of alloy steel other than stainless, in coils (excl. rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 72299050) |
| 73011000 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements |
| 73012000 | Angles, shapes and sections, of iron or steel, welded |
| 73021010 | Current-conducting rails of iron or steel, with parts of non-ferrous metal, for railway or tramway track (excl. check-rails) |
| 73021022 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of >= 36 kg/m |
| 73021028 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of < 36 kg/m |
| 73021040 | Grooved rails of iron or steel, for railway or tramway track, new |
| 73021050 | Rails of iron or steel, for railway or tramway track, new (excl. vignole rails, grooved rails, and current-conducting rails with parts of non-ferrous metal) |
| 73021090 | Rails of iron or steel, for railway or tramway track, used (excl. current-conducting rails with parts of non-ferrous metal) |
| 73023000 | Switch blades, crossing frogs, point rods and other crossing pieces, for railway or tramway track, of iron or steel |
| 73029000 | Sleepers ‘cross-ties’, check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excl. rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates) |
| 73030010 | Tubes and pipes of a kind used in pressure systems, of cast iron |
| 73030090 | Tubes, pipes and hollow profiles, of cast iron (excl. products of a kind used in pressure systems) |
| 73041910 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of <= 168,3 mm (excl. products of stainless steel or of cast iron) |
| 73041930 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. products of stainless steel or of cast iron) |
| 73041990 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 406,4 mm (excl. products of stainless steel or of cast iron) |
| 73042200 | Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas |
| 73042300 | Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) |
| 73042400 | Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel |
| 73042910 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter <= 168,3 mm (excl. products of cast iron) |
| 73042930 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 168,3 mm, but <= 406,4 mm (excl. products of cast iron) |
| 73042990 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 406,4 mm (excl. products of cast iron) |
| 73043120 | Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) |
| 73043180 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and precision tubes) |
| 73043950 | Threaded or threadable tubes ‘gas pipe’, seamless, of iron or non-alloy steel (excl. of cast iron) |
| 73043982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 73043950) |
| 73043983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 73043950) |
| 73043988 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 73043950) |
| 73044100 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) |
| 73044983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) |
| 73044985 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) |
| 73044989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) |
| 73045110 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 730419 to 730429) |
| 73045181 | Precision tubes, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil and tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum) |
| 73045189 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and, pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum) |
| 73045930 | Tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 730419 to 730429) |
| 73045930 | Tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 730419 to 730429) |
| 73045982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
| 73045983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
| 73045989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
| 73049000 | Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) |
| 73051100 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally submerged arc welded |
| 73051200 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally arc welded (excl. products longitudinally submerged arc welded) |
| 73052000 | Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel |
| 73053100 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally welded (excl. products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) |
| 73061100 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm |
| 73061900 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) |
| 73062100 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm |
| 73062900 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) |
| 73063049 | Threaded or threadable tubes ‘gas pipe’, welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) |
| 73063080 | Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes ‘gas pipe’) |
| 73064020 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) |
| 73065021 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’ |
| 73065029 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) |
| 73065080 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) |
| 73066110 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel |
| 73066910 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) |
| 73066990 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) |
| 73069000 | Tubes, pipes and hollow profiles, e.g., open seam, riveted or similarly closed, of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) |
| 73071110 | Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems |
| 73071190 | Tube or pipe fittings of non-malleable cast iron (excl. products of a kind used in pressure systems) |
| 73071910 | Tube or pipe fittings of cast iron (excl. of non-malleable) |
| 73071910 | Tube or pipe fittings of cast iron (excl. of non-malleable) |
| 73071990 | Cast tube or pipe fittings of steel |
| 73072100 | Flanges of stainless steel (excl. cast products) |
| 73072210 | Sleeves, of stainless steel, threaded (excl. cast products) |
| 73072290 | Elbows and bends, of stainless steel, threaded (excl. cast products) |
| 73072310 | Butt welding elbows and bends of stainless steel (excl. cast products) |
| 73072390 | Butt welding tube or pipe fittings of stainless steel (excl. cast products and elbows and bends) |
| 73072910 | Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves) |
| 73072980 | Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges) |
| 73079100 | Flanges of iron or steel (excl. cast or stainless products) |
| 73079210 | Sleeves of iron or steel, threaded (excl. cast or of stainless steel) |
| 73079290 | Elbows and bends, of iron or steel, threaded (excl. cast or of stainless steel) |
| 73079311 | Butt welding elbows and bends, of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products) |
| 73079319 | Butt welding fittings of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) |
| 73079391 | Butt welding elbows and bends, of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products) |
| 73079399 | Butt welding fittings of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) |
| 73079910 | Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves) |
| 73079980 | Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges) |
| 73082000 | Towers and lattice masts, of iron or steel |
| 73084000 | Equipment for scaffolding, shuttering, propping or pit-propping (excl. composite sheetpiling products and formwork panels for poured-in-place concrete, which have the characteristics of moulds) |
| 73089098 | Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) |
| 73090051 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of > 100.000 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) |
| 73102910 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of < 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) |
| 73102990 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of = 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) |
| 73110011 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity < 20 l (excl. containers specifically constructed or equipped for one or more types of transport) |
| 73110013 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity >= 20 l to <= 50 l (excl. containers specifically constructed or equipped for one or more types of transport) |
| 73110019 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity > 50 l (excl. containers specifically constructed or equipped for one or more types of transport) |
| 73110030 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure < 165 bar (excl. containers specifically constructed or equipped for one or more types of transport) |
| 73110091 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of < 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) |
| 73110099 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of >= 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) |
| 73181100 | Coach screws of iron or steel |
| 73181210 | Wood screws of stainless steel (excl. coach screws) |
| 73181290 | Wood screws of iron or steel other than stainless (excl. coach screws) |
| 73181300 | Screw hooks and screw rings, of iron or steel |
| 73181410 | Self-tapping screws, of stainless steel (excl. wood screws) |
| 73181491 | Spaced-thread screws of iron or steel other than stainless |
| 73181499 | Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) |
| 73181535 | Screws and bolts, of stainless steel ‘whether or not with their nuts and washers’, without heads (excl. screws and bolts for fixing railway track construction material) |
| 73181542 | Screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material) |
| 73181548 | Screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material) |
| 73181552 | Screws and bolts, of stainless steel ‘whether or not with their nuts and washers’, with slotted or cross-recessed heads (excl. wood screws and self-tapping screws) |
| 73181568 | Hexagonal-socket head screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’ (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
| 73181575 | Hexagon screws and bolts, of stainless steel ‘whether or not with their nuts and washers’ (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
| 73181582 | Hexagon screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, with a tensile strength of < 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
| 73181588 | Hexagon screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
| 73181595 | Screws and bolts, of iron or steel ‘whether or not with their nuts and washers’, with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) |
| 73181631 | Blind rivet nuts of stainless steel |
| 73181639 | Nuts of stainless steel (excl. blind rivet nuts) |
| 73181640 | Blind rivet nuts of iron or steel other than stainless |
| 73181660 | Self-locking nuts of iron or steel other than stainless |
| 73181692 | Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts) |
| 73181699 | Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts) |
| 73181900 | Threaded articles, of iron or steel, n.e.s. |
| 73182100 | Spring washers and other lock washers, of iron or steel |
| 73182200 | Washers of iron or steel (excl. spring washers and other lock washers) |
| 73182300 | Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) |
| 73182400 | Cotters and cotter pins, of iron or steel |
| 73182900 | Non-threaded articles, of iron or steel |
| 73261100 | Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked |
| 73261910 | Articles of iron or steel, open-die forged, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) |
| 73261990 | Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) |
| 73262000 | Articles of iron or steel wire, n.e.s. |
| 73269040 | Pallets and similar platforms for handling goods, of iron or steel |
| 73269050 | Reels for cables, piping and the like, of iron or steel |
| 73269092 | Articles of iron or steel, open-die forged, n.e.s. |
| 73269094 | Articles of iron or steel, closed-die forged, n.e.s. |
| 73269096 | Sintered articles of iron or steel, n.e.s. |
| 73269098 | Articles of iron or steel, n.e.s. |
Or. en
Amendment 383
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72071912 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting |
Or. en
Amendment 384
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72071980 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) |
Or. en
Amendment 385
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72072017 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) |
Or. en
Amendment 386
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72072039 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular ‘other than square’ cross-section and the width >= twice the thickness, forged |
Or. en
Amendment 387
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72081000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process |
Or. en
Amendment 388
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72082600 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, pickled, without patterns in relief |
Or. en
Amendment 389
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72082700 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, pickled, without patterns in relief |
Or. en
Amendment 390
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085120 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief |
Or. en
Amendment 391
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 721199080 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, non-perforated |
Or. en
Amendment 392
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202021 | Flat-rolled products of stainless steel, of a width of = 3 mm and containing by weight >= 2,5% nickel |
Or. en
Amendment 393
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202021 | Flat-rolled products of stainless steel, of a width of = 3 mm and containing by weight >= 2,5% nickel |
Or. en
Amendment 394
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72255080 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’ (excl. products of high-speed steel or silicon-electrical steel) |
Or. en
Amendment 395
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72112900 | Flat-rolled products of iron or non-alloy steel, of a width of = 0,25% of carbon |
Or. en
Amendment 396
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72061000 | Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) |
Or. en
Amendment 397
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72189980 | Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) |
Or. en
Amendment 398
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73042200 | Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas |
Or. en
Amendment 399
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72191390 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75mm, containing by weight < 2,5 nickel |
Or. en
Amendment 400
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72071290 | Semi-finished products of iron or non-alloy steel, containing by weight = twice the thickness, forged |
Or. en
Amendment 401
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72119020 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, perforated |
Or. en
Amendment 402
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73042300 | Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) |
Or. en
Amendment 403
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73071190 | Tube or pipe fittings of non-malleable cast iron (excl. products of a kind used in pressuresystems) |
Or. en
Amendment 404
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72192290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight <2,5% nickel |
Or. en
Amendment 405
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72259100 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) |
Or. en
Amendment 406
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73041990 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 406,4 mm (excl. products of stainless steel or of cast iron) |
Or. en
Amendment 407
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72192210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but = 2,5% nickel |
Or. en
Amendment 408
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72119020 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coatednon-perforated |
Or. en
Amendment 409
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73071910 | Tube or pipe fittings of cast iron (excl. of non-malleable) |
Or. en
Amendment 410
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72259200 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) |
Or. en
Amendment 411
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72119080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coatednon-perforated |
Or. en
Amendment 412
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72121090 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled ‘cold-reduced’, of a width of < 600 mm, tinned (excl. tinplate, not further worked than surface-treated) |
Or. en
Amendment 413
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| 73042400 | Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel |
Or. en
Amendment 414
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73071990 | Cast tube or pipe fittings of steel |
Or. en
Amendment 415
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 720916090 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) |
Or. en
Amendment 416
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72122000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, electrolytically plated or coated with zinc |
Or. en
Amendment 417
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73042910 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter <= 168,3 mm (excl. products of cast iron) |
Or. en
Amendment 418
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072100 | Flanges of stainless steel (excl. cast products) |
Or. en
Amendment 419
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72259900 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) |
Or. en
Amendment 420
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72123000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, tinned (excl. electrolytically plated or coated with zinc) |
Or. en
Amendment 421
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72124020 | Tinplate of a width of = 97% of tin), not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, varnished |
Or. en
Amendment 422
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072210 | Sleeves, of stainless steel, threaded (excl. cast products) |
Or. en
Amendment 423
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202029 | Flat-rolled products of stainless steel, of a width of = 3 mm and containing by weight < 2,5% nickel |
Or. en
Amendment 424
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72124080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, painted, varnished or plastic coated (excl. tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) |
Or. en
Amendment 425
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72192300 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm |
Or. en
Amendment 426
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72261100 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, grain-oriented |
Or. en
Amendment 427
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072290 | Elbows and bends, of stainless steel, threaded (excl. cast products) |
Or. en
Amendment 428
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72125030 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with chromium or nickel |
Or. en
Amendment 429
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072310 | Butt welding elbows and bends of stainless steel (excl. cast products) |
Or. en
Amendment 430
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72125040 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with copper |
Or. en
Amendment 431
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072390 | Butt welding tube or pipe fittings of stainless steel (excl. cast products and elbows andbends) |
Or. en
Amendment 432
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72125061 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with aluminium-zinc alloys |
Or. en
Amendment 433
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72261910 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled |
Or. en
Amendment 434
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72125069 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys) |
Or. en
Amendment 435
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072910 | Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves) |
Or. en
Amendment 436
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72125090 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad (excl. products plated or coated with tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic-coated) |
Or. en
Amendment 437
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72192400 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm |
Or. en
Amendment 438
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73072980 | Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings andflanges) |
Or. en
Amendment 439
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72091790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl electrical) |
Or. en
Amendment 440
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72126000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad |
Or. en
Amendment 441
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72262000 | Flat-rolled products of high-speed steel, of a width of <= 600mm, hot-rolled or cold-rolled ‘cold-reduced’ |
Or. en
Amendment 442
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72131000 | Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process |
Or. en
Amendment 443
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079100 | Flanges of iron or steel (excl. cast or stainless products) |
Or. en
Amendment 444
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73042990 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 406,4 mm (excl. products of cast iron) |
Or. en
Amendment 445
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72132000 | Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) |
Or. en
Amendment 446
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079210 | Sleeves of iron or steel, threaded (excl. cast or of stainless steel) |
Or. en
Amendment 447
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72193100 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 4,75 mm |
Or. en
Amendment 448
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72139120 | Bars and rods, hot-rolled, of the type used for tyre cord, smooth, of iron or non-alloy steel, in irregularly wound coils |
Or. en
Amendment 449
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079290 | Elbows and bends, of iron or steel, threaded (excl. cast or of stainless steel) |
Or. en
Amendment 450
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72269120 | Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolled |
Or. en
Amendment 451
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72149995 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel) |
Or. en
Amendment 452
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079311 | Butt welding elbows and bends, of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products) |
Or. en
Amendment 453
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72269199 | Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of < 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) |
Or. en
Amendment 454
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72151000 | Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished |
Or. en
Amendment 455
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72155011 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon of rectangular ‘other than square’ cross-section (excl. those of free-cutting steel) |
Or. en
Amendment 456
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72193210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 3 mm but = 2,5% nickel |
Or. en
Amendment 457
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72269200 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled ‘cold-reduced’ (excl. products of high-speed steel or silicon-electrical steel) |
Or. en
Amendment 458
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72155080 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight >= 0,25% of carbon (excl. those of free-cutting steel) |
Or. en
Amendment 459
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079319 | Butt welding fittings of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) |
Or. en
Amendment 460
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72159000 | Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. |
Or. en
Amendment 461
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72271000 | Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils |
Or. en
Amendment 462
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72091891 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,35 mm but < 0,5 mm (excl. electrical) |
Or. en
Amendment 463
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163110 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but mm |
Or. en
Amendment 464
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202041 | Flat-rolled products of stainless steel, of a width of 0,35 mm but = 2,5% nickel |
Or. en
Amendment 465
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72279095 | Bars and rods, hot-rolled, in irregularly wound coils of alloy steel other than stainless (excl. of high-speed steel or silico-manganese steel and bars and rods of subheadings 72279010 and 72279050) |
Or. en
Amendment 466
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 7216390 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm |
Or. en
Amendment 467
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163211 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220mm |
Or. en
Amendment 468
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079391 | Butt welding elbows and bends, of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products) |
Or. en
Amendment 469
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72281020 | Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 470
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72193290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of >= 3mm but <= 4,75 mm containing by weight < 2,5% nickel |
Or. en
Amendment 471
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163219 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220mm (excl 7216.32.11) |
Or. en
Amendment 472
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079399 | Butt welding fittings of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) |
Or. en
Amendment 473
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72281050 | Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 474
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163291 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm |
Or. en
Amendment 475
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079910 | Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves) |
Or. en
Amendment 476
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163299 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm (excl. 7216.32.91) |
Or. en
Amendment 477
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72193510 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of = 2,5% nickel |
Or. en
Amendment 478
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73079980 | Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges) |
Or. en
Amendment 479
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163310 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 180mm |
Or. en
Amendment 480
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72281090 | Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 481
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72163390 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 180 mm |
Or. en
Amendment 482
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72165099 | Profile of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded (other than with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm and U-, I-. H- L-, or T-sections and ribbed sections (ribbed steel) |
Or. en
Amendment 483
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73082000 | Towers and lattice masts, of iron or steel |
Or. en
Amendment 484
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043120 | Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) |
Or. en
Amendment 485
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73084000 | Equipment for scaffolding, shuttering, propping or pit-propping (excl. composite sheet piling products and formwork panels for poured-in-place concrete, which have the characteristics of moulds) |
Or. en
Amendment 486
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72166900 | Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) |
Or. en
Amendment 487
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72091899 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of < 0,35 mm (excl. electrical) |
Or. en
Amendment 488
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73042930 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 168,3 mm, but <= 406,4 mm (excl. products of cast iron) |
Or. en
Amendment 489
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73041910 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of <= 168 mm (excl. products of stainless steel or cast iron) |
Or. en
Amendment 490
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73089098 | Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products madeprincipally of sheet) |
Or. en
Amendment 491
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72171090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods) |
Or. en
Amendment 492
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73090051 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of> 100.000 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment |
Or. en
Amendment 493
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72199020 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, perforated |
Or. en
Amendment 494
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72172090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with zinc (excl. bars and rods) |
Or. en
Amendment 495
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73102910 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of < 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) |
Or. en
Amendment 496
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72173041 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, copper-coated (excl. bars and rods) |
Or. en
Amendment 497
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73102990 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of = 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) |
Or. en
Amendment 498
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72173049 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated with base metals (excl. products plated or coated with zinc or copper and bars and rods) |
Or. en
Amendment 499
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73110011 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity < 20 l (excl. containers specifically constructed or equipped for one or more types of transport) |
Or. en
Amendment 500
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72173090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with base metals (excl. products plated or coated with zinc, and bars and rods) |
Or. en
Amendment 501
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity >= 20 l to <= 50 l (excl. containers specifically constructed or equipped for one or more types of transport) |
Or. en
Amendment 502
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72179020 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated (excl. products plated or coated with base metals and bars and rods) |
Or. en
Amendment 503
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72282099 | Bars and rods of silico-manganese steel, of square or other than rectangular cross-section, only cold-formed or cold-finished, incl. further worked, or hot-rolled and further worked (excl. hot-rolled, hot drawn or extruded, not further worked than clad, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 504
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72179090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated (excl. products plated or coated with base metals, and bars and rods)) |
Or. en
Amendment 505
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73110019 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity > 50 l (excl. containers specifically constructed or equipped for one or more types of transport) |
Or. en
Amendment 506
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72181000 | Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) |
Or. en
Amendment 507
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202049 | Flat-rolled products of stainless steel, of a width of 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel |
Or. en
Amendment 508
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72283020 | Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 509
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72189110 | Semi-finished products of stainless steel, of rectangular ‘other than square’ cross-section, containing by weight >= 2,5% nickel |
Or. en
Amendment 510
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73110030 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure < 165 bar (excl. containers specifically constructed or equipped for one or more types oftransport) |
Or. en
Amendment 511
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72189180 | Semi-finished products of stainless steel, of rectangular ‘other than square’ cross-section, containing by weight < 2,5 nickel |
Or. en
Amendment 512
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73041930 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 168,3 mm but <= 406, 4 mm (excl. products of stainless steel or of cast iron) |
Or. en
Amendment 513
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72092500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 3 mm |
Or. en
Amendment 514
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72283069 | Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 72283049 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 515
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72189919 | Semi-finished products of stainless steel, of square cross-section, forged |
Or. en
Amendment 516
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73110091 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of < 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) |
Or. en
Amendment 517
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72189920 | Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting |
Or. en
Amendment 518
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72283089 | Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72283049 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 519
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73110099 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of >= 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) |
Or. en
Amendment 520
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72284010 | Bars and rods of tool steel, only forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 521
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285020 | Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 522
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181100 | Coach screws of iron or steel |
Or. en
Amendment 523
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043180 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gasand precision tubes) |
Or. en
Amendment 524
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181210 | Wood screws of stainless steel (excl. coach screws) |
Or. en
Amendment 525
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285040 | Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 526
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181290 | Wood screws of iron or steel other than stainless (excl. coach screws) |
Or. en
Amendment 527
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72092690 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) |
Or. en
Amendment 528
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181300 | Screw hooks and screw rings, of iron or steel |
Or. en
Amendment 529
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285061 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 530
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181410 | Self-tapping screws, of stainless steel (excl. wood screws) |
Or. en
Amendment 531
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181491 | Spaced-thread screws of iron or steel other than stainless |
Or. en
Amendment 532
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202081 | Flat-rolled products of stainless steel, of a width of = 2,5% nickel |
Or. en
Amendment 533
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181499 | Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) |
Or. en
Amendment 534
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285040 | Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 535
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181535 | Screws and bolts, of stainless steel ‘whether or not with their nuts and washers’, without heads (excl. screws and bolts for fixing railway track construction material) |
Or. en
Amendment 536
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181542 | Screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material) |
Or. en
Amendment 537
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181548 | Screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material) |
Or. en
Amendment 538
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285069 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 539
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72092790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 0,5 mm but |
Or. en
Amendment 540
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043950 | Threaded or threadable tubes ‘gas pipe’, seamless, of iron or non-alloy steel (excl. ofcast iron) |
Or. en
Amendment 541
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181552 | Screws and bolts, of stainless steel ‘whether or not with their nuts and washers’, with slotted or cross-recessed heads (excl. wood screws and self-tapping screws) |
Or. en
Amendment 542
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72285080 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 72285040, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 543
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085191 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15mm without patterns in relief (excl ‘wide flats’) |
Or. en
Amendment 544
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181568 | Hexagonal-socket head screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’ (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
Or. en
Amendment 545
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181575 | Hexagon screws and bolts, of stainless steel ‘whether or not with their nuts and washers’ (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) |
Or. en
Amendment 546
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72286020 | Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
Or. en
Amendment 547
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181582 | Hexagon screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, with a tensile strength of < 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track constructionmaterial) |
Or. en
Amendment 548
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181588 | Hexagon screws and bolts, of iron or steel other than stainless ‘whether or not with their nuts and washers’, with a tensile strength of => 800 MPa (excl. with socket head, woodscrews, self-tapping screws and screws and bolts for fixing railway track construction material) |
Or. en
Amendment 549
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181595 | Screws and bolts, of iron or steel ‘whether or not with their nuts and washers’, with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooksand screw rings) |
Or. en
Amendment 550
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 |
Or. en
Amendment 551
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72287010 | Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded |
Or. en
Amendment 552
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181631 | Blind rivet nuts of stainless steel |
Or. en
Amendment 553
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72099020 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, perforated |
Or. en
Amendment 554
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181639 | Nuts of stainless steel (excl. blind rivet nuts) |
Or. en
Amendment 555
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181640 | Blind rivet nuts of iron or steel other than stainless |
Or. en
Amendment 556
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181660 | Self-locking nuts of iron or steel other than stainless |
Or. en
Amendment 557
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72287090 | Angles, shapes and sections of alloy steel other than stainless, n.e.s. (excl. products not further worked than hot-rolled, hot-drawn or extruded) |
Or. en
Amendment 558
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72202089 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled ‘cold-reduced’, of a thickness of <= 0,35mm and containing by weight <2,5% nickel |
Or. en
Amendment 559
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181692 | Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts) |
Or. en
Amendment 560
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72288000 | Hollow drill bars and rods, of alloy or non-alloy steel |
Or. en
Amendment 561
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181699 | Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts) |
Or. en
Amendment 562
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72292000 | Wire of silico-manganese steel, in coils (excl. bars and rods) |
Or. en
Amendment 563
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73181900 | Threaded articles, of iron or steel, n.e.s. |
Or. en
Amendment 564
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72209020 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, perforated |
Or. en
Amendment 565
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73182100 | Spring washers and other lock washers, of iron or steel |
Or. en
Amendment 566
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72099080 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’ and further worked, but not clad, plated or coated, non-perforated |
Or. en
Amendment 567
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72299050 | Wire of steel containing by weight 0,9% to 1,1% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, in coils (excl. rolled bars and rods) |
Or. en
Amendment 568
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73182200 | Washers of iron or steel (excl. spring washers and other lock washers) |
Or. en
Amendment 569
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73182300 | Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) |
Or. en
Amendment 570
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72209080 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked, non-perforated |
Or. en
Amendment 571
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72299090 | Wire of alloy steel other than stainless, in coils (excl. rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 72299050)or cold-rolled ‘cold-reduced’ and further worked, non-perforated |
Or. en
Amendment 572
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73182400 | Cotters and cotter pins, of iron or steel |
Or. en
Amendment 573
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73011000 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements |
Or. en
Amendment 574
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73182900 | Non-threaded articles, of iron or steel |
Or. en
Amendment 575
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73261100 | Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked |
Or. en
Amendment 576
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73012000 | Angles, shapes and sections, of iron or steel, welded |
Or. en
Amendment 577
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72210010 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight >= 2,5% nickel |
Or. en
Amendment 578
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73261910 | Articles of iron or steel, open-die forged, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) |
Or. en
Amendment 579
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72101100 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, tinned, of a thickness of >= 0,5 mm |
Or. en
Amendment 580
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021010 | Current-conducting rails of iron or steel, with parts of non-ferrous metal, for railway or tramway track (excl. check-rails) |
Or. en
Amendment 581
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73261990 | Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) |
Or. en
Amendment 582
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73262000 | Articles of iron or steel wire, n.e.s. |
Or. en
Amendment 583
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021022 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of >= 36 kg/m |
Or. en
Amendment 584
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 73043950) |
Or. en
Amendment 585
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269040 | Pallets and similar platforms for handling goods, of iron or steel |
Or. en
Amendment 586
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021028 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of < 36 kg/m |
Or. en
Amendment 587
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269050 | Reels for cables, piping and the like, of iron or steel |
Or. en
Amendment 588
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269092 | Articles of iron or steel, open-die forged, n.e.s. |
Or. en
Amendment 589
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021040 | Grooved rails of iron or steel, for railway or tramway track, new |
Or. en
Amendment 590
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269094 | Articles of iron or steel, closed-die forged, n.e.s. |
Or. en
Amendment 591
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72101220 | Tinplate of iron or non-alloy steel, of a width of >= 600 mm and of a thickness of = 97% of tin), not further worked than surface-treated |
Or. en
Amendment 592
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72210090 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight < 2,5% nickel |
Or. en
Amendment 593
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021050 | Rails of iron or steel, for railway or tramway track, new (excl. vignole rails, grooved rails, and current-conducting rails with parts of non-ferrous metal) |
Or. en
Amendment 594
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269096 | Sintered articles of iron or steel, n.e.s. |
Or. en
Amendment 595
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73269098 | Articles of iron or steel, n.e.s. |
Or. en
Amendment 596
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73021090 | Rails of iron or steel, for railway or tramway track, used (excl. current-conducting rails with parts of non-ferrous metal) |
Or. en
Amendment 597
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73023000 | Switch blades, crossing frogs, point rods and other crossing pieces, for railway or tramway track, of iron or steel |
Or. en
Amendment 598
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73029000 | Sleepers ‘cross-ties’, check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excl. rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates) |
Or. en
Amendment 599
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73030010 | Tubes and pipes of a kind used in pressure systems, of cast iron |
Or. en
Amendment 600
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221111 |
Or. en
Amendment 601
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73030090 | Tubes, pipes and hollow profiles, of cast iron (excl. products of a kind used in pressure systems) |
Or. en
Amendment 602
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72101280 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with tin, of a thickness of < 0,5 mm (excl. tinplate) |
Or. en
Amendment 603
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72102000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with lead, incl. terne-plate |
Or. en
Amendment 604
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72105000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, plated or coated with chromium oxides or with chromium and chromium oxides |
Or. en
Amendment 605
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72107010 | Tinplate of a width of >= 600 mm and of a thickness of = 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, varnished |
Or. en
Amendment 606
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72109040 | Flat-rolled products of iron or non-alloy steel, tinned and printed, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ |
Or. en
Amendment 607
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72109080 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled ‘cold-reduced’, of a width of >= 600 mm, plated or coated (excl. plated or coated with thin, lead ‘incl. terne-plate’, zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed) |
Or. en
Amendment 608
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73043988 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 73043950) |
Or. en
Amendment 609
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221119 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickel |
Or. en
Amendment 610
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085198 | Flat-rolled products of iron or non-alloy steel, of a width of = 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm without patterns in relief |
Or. en
Amendment 611
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73044983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil orgas and tubes) |
Or. en
Amendment 612
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73044985 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled,line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) |
Or. en
Amendment 613
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73044989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gasand tubes) |
Or. en
Amendment 614
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221181 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring = 2,5% nickel |
Or. en
Amendment 615
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045110 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 730419 to 730429) |
Or. en
Amendment 616
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221189 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickel |
Or. en
Amendment 617
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221910 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) |
Or. en
Amendment 618
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72221990 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight < 2,5% nickel (excl. such products of circular cross-section) |
Or. en
Amendment 619
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| Bars and rods of stainless steel, of circular cross-section of a diameter >= >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel |
Or. en
Amendment 620
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085200 | Flat-rolled products of iron or non-alloy steel, of a width of = 4,75 mm but <= 10 mm without patterns in relief |
Or. en
Amendment 621
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045181 | Precision tubes, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil and tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum) |
Or. en
Amendment 622
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222019 | Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight < 2,5% nickel |
Or. en
Amendment 623
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222021 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but = 2,5% nickel |
Or. en
Amendment 624
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045189 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled ‘cold-reduced’ (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and , pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chrome, whether or notcontaining by weight <= 0,5% molybdenum) |
Or. en
Amendment 625
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222029 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel |
Or. en
Amendment 626
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222031 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring = 2,5% nickel |
Or. en
Amendment 627
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222039 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickel |
Or. en
Amendment 628
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045930 | Tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but = 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollowprofiles of subheadings 730419 to 730429) |
Or. en
Amendment 629
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222081 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) |
Or. en
Amendment 630
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72222089 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section) |
Or. en
Amendment 631
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085299 | Flat-rolled products of iron or non-alloy steel, of a width of = 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief (excl rolled on four faces or a closed bow pass of width <= 1250mm) |
Or. en
Amendment 632
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 722223091 | Other bars and rods of stainless steel, containing by weight < 2,5% of nickel, forged |
Or. en
Amendment 633
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
Or. en
Amendment 634
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 7224010 | Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded |
Or. en
Amendment 635
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72224090 | Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. |
Or. en
Amendment 636
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72230011 | Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excl. bars and rods) |
Or. en
Amendment 637
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
Or. en
Amendment 638
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72230019 | Wire of stainless steel, in coils, containing by weight >= 2,5% nickel (excl. such products containing 28% to 31% nickel and 20% to 22% chromium, and bars and rods) |
Or. en
Amendment 639
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72230091 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel, 13% to 25% chromium and 3,5% to 6% aluminium (excl. bars and rods) |
Or. en
Amendment 640
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73045989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 73045930) |
Or. en
Amendment 641
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72230099 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel (excl. such products containing 13% to 25% chromium and 3,5% to 6% aluminium, and bars and rods) |
Or. en
Amendment 642
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085310 | Flat-rolled products of iron or non-alloy steel, of a width of = 4 mm but <4,75 mm, without patterns in relief |
Or. en
Amendment 643
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72241010 | Ingots and other primary forms, of tool steel |
Or. en
Amendment 644
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73049000 | Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) |
Or. en
Amendment 645
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72241090 | Steel, alloy, other than stainless, in ingots or other primary forms (excl. of tool steel, waste and scrap in ingot form and products obtained by continuous casting) |
Or. en
Amendment 646
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73051100 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally submerged arc welded |
Or. en
Amendment 647
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72249031 | Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting |
Or. en
Amendment 648
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73051200 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally arc welded (excl. products longitudinally submerged arc welded) |
Or. en
Amendment 649
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73052000 | Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel |
Or. en
Amendment 650
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72249038 | Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) |
Or. en
Amendment 651
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73053100 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally welded (excl. products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) |
Or. en
Amendment 652
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73061100 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm |
Or. en
Amendment 653
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72085400 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief |
Or. en
Amendment 654
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72251100 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented |
Or. en
Amendment 655
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73061900 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of castiron) |
Or. en
Amendment 656
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72251990 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled ‘cold-reduced’, non-grain-oriented |
Or. en
Amendment 657
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72253010 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils |
Or. en
Amendment 658
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73062100 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm |
Or. en
Amendment 659
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72253090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
Or. en
Amendment 660
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73062900 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel orof cast iron) |
Or. en
Amendment 661
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72254010 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils |
Or. en
Amendment 662
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73063049 | Threaded or threadable tubes ‘gas pipe’, welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) |
Or. en
Amendment 663
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72254015 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils |
Or. en
Amendment 664
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72089020 | Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated, perforated |
Or. en
Amendment 665
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73063080 | Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes ‘gas pipe’) |
Or. en
Amendment 666
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72254040 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
Or. en
Amendment 667
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73064020 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled ‘cold-reduced’ (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) |
Or. en
Amendment 668
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72254060 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
Or. en
Amendment 669
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73065021 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled ‘cold-reduced’ |
Or. en
Amendment 670
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73065029 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) |
Or. en
Amendment 671
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73065080 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steeltubes) |
Or. en
Amendment 672
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73066110 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel |
Or. en
Amendment 673
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73066910 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) |
Or. en
Amendment 674
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72254090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) |
Or. en
Amendment 675
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72091500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 3 mm |
Or. en
Amendment 676
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73066990 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) |
Or. en
Amendment 677
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73069000 | Tubes, pipes and hollow profiles, e.g., open seam, riveted or similarly closed, of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) |
Or. en
Amendment 678
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 72255020 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than cold-rolled ‘cold-reduced’ |
Or. en
Amendment 679
Massimiliano Salini, Fulvio Martusciello, Letizia Moratti, Flavio Tosi, Susana Solís Pérez
Proposal for a regulation
Annex – table – subheading 3 with new CN
| Iron and steel | |
| Text proposed by the Commission | |
| CN code | Description |
| Amendment | |
| Iron and steel | |
| CN code | Description |
| 73071110 | Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems |
Or. en