Circularity requirements for vehicle design and management of end-of-life vehicles

3.9.2025 A100158/418

Amendment 418

Jonas Sjöstedt, Luke Ming Flanagan

on behalf of The Left Group

Report A100158/2025

Jens Gieseke, Paulius Saudargas

Circularity requirements for vehicle design and management of end-of-life vehicles

(COM(2023)0451 – C9-0308/2023 – 2023/0284(COD))

Proposal for a regulation

Article 6 paragraph 1 subparagraph -1 (new)

Text proposed by the Commission

Amendment

-1 The plastic contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 48 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 20 % of plastic recycled by weight from post-consumer plastic waste.

Or. en

3.9.2025 A100158/419

Amendment 419

Jonas Sjöstedt, Luke Ming Flanagan

on behalf of The Left Group

Report A100158/2025

Jens Gieseke, Paulius Saudargas

Circularity requirements for vehicle design and management of end-of-life vehicles

(COM(2023)0451 – C9-0308/2023 – 2023/0284(COD))

Proposal for a regulation

Article 6 paragraph 1 subparagraph 1

Text proposed by the Commission

Amendment

The plastic contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 72 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 25 % of plastic recycled by weight from post-consumer plastic waste.

The plastic contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 72 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 30 % of plastic recycled by weight from post-consumer plastic waste.

Or. en

3.9.2025 A100158/420

Amendment 420

Jonas Sjöstedt

on behalf of The Left Group

Report A100158/2025

Jens Gieseke, Paulius Saudargas

Circularity requirements for vehicle design and management of end-of-life vehicles

(COM(2023)0451 – C9-0308/2023 – 2023/0284(COD))

Proposal for a regulation

Article 6 paragraph 3 subparagraph 1

Text proposed by the Commission

Amendment

The Commission is empowered to adopt delegated acts, in accordance with Article 50, to supplement this Regulation by establishing a minimum share of steel recycled from post-consumer steel waste to be present and incorporated into vehicle types to be type-approved in accordance with this Regulation and Regulation (EU) 2018/858.

The steel contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 48 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 30% of steel by weight recycled from post-consumer waste.

At least 75% of the target set out in the first subparagraph shall be achieved by including steel recycled from end-of-life vehicles in the vehicle type concerned.

As of 1 January 2035, the steel contained in each vehicle type that is type-approved under Regulation (EU) 2018/858 shall contain a minimum of 40% of steel recycled by weight from post-consumer steel waste.

At least 75% of the target set out in the third subparagraph shall be achieved by including steel recycled from end-of-life vehicles in the vehicle type concerned.

Or. en

3.9.2025 A100158/421

Amendment 421

Jonas Sjöstedt, Luke Ming Flanagan

on behalf of The Left Group

Report A100158/2025

Jens Gieseke, Paulius Saudargas

Circularity requirements for vehicle design and management of end-of-life vehicles

(COM(2023)0451 – C9-0308/2023 – 2023/0284(COD))

Proposal for a regulation

Article 6 paragraph 4 subparagraph 1 introductory part

Text proposed by the Commission

Amendment

By [OP: Please insert the date = the last day of the month following 35 months after the date of entry into force of this Regulation], the Commission shall assess the feasibility of establishing a requirement on the minimum share of:

The aluminium contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 48 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 30 % of aluminium recycled by weight from post-consumer aluminium waste.

At least 10 % of the target set out in the first subparagraph shall be achieved by including aluminium recycled from end-of-life vehicles in the vehicle type concerned.

The aluminium contained in each vehicle type that is type-approved as of [OP: Please insert the date = the first day of the month following 108 months after the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 50 % aluminium recycled by weight from post-consumer aluminium waste.

At least 20 % of the target set out in the second subparagraph shall be achieved by including aluminium recycled from end-of-life vehicles in the vehicle type concerned.

By [OP: Please insert the date = the last day of the month following 18 months after the date of entry into force of this Regulation], the Commission shall adopt an implementing act in accordance with Article 51(2) to supplement this Regulation by establishing the methodology for the calculation and verification, for the purposes of the above subparagraphs of this Article, of the share of aluminium recovered from post-consumer waste, and from end-of-life vehicles respectively, present in and incorporated into the vehicle type. The verification methodology shall be designed considering potential circumvention and fraudolent practices so as to minimise the risk that such practices occur, and it may be based on independent and accredited third party certification.

By [OP: Please insert the date = the last day of the month following 12 months after the date of entry into force of this Regulation], the Commission shall assess the feasibility of establishing a requirement on the minimum share of:

Or. en