What changed

P10_TA(2026)0227

P10_TA(2025)0168

Circularity requirements for vehicle design and management of end-of-life vehicles

PE768.004

EuropeanAmendments Parliamentadopted legislativeby resolutionthe ofEuropean 18Parliament Juneon 20269 September 2025 on the proposal for a regulation of the European Parliament and of the Council on circularity requirements for vehicle design and on management of end-of-life vehicles, amending Regulations (EU) 2018/858 and 2019/1020 and repealing Directives 2000/53/EC and 2005/64/EC (COM(2023)0451 – C9-0308/2023 – 2023/0284(COD))

(Ordinary legislative procedure: first reading)

The European Parliament,

Amendment 1

– having regard to the Commission proposal to Parliament and the Council (COM(2023)0451),

Proposal for a regulation

– having regard to Article 294(2) and Article 114 of the Treaty on the Functioning of the European Union, pursuant to which the Commission submitted the proposal to Parliament (C9-0308/2023),

Recital 1

– having regard to the opinion of the Committee on Legal Affairs on the proposed legal basis,

Amendment 2

– having regard to Article 294(3) and Article 114 and Article 192(1) of the Treaty on the Functioning of the European Union,

Proposal for a regulation

– having regard to the opinion of the European Economic and Social Committee of 14 December 2023,

Recital 2

– after consulting the Committee of the Regions,

Amendment 3

– having regard to the provisional agreement approved by the responsible committees under Rule 75(4) of its Rules of Procedure and the undertaking given by the Council representative by letter of 25 February 2026 to approve Parliament’s position, in accordance with Article 294(4) of the Treaty on the Functioning of the European Union,

Proposal for a regulation

– having regard to Rules 60 and 41 of its Rules of Procedure,

Recital 6

– having regard to the joint deliberations of the Committee on the Environment, Climate and Food Safety and the Committee on the Internal Market and Consumer Protection under Rule 59 of the Rules of Procedure,

Amendment 4

– having regard to the opinion of the Committee on Transport and Tourism,

Proposal for a regulation

– having regard to the report of the Committee on the Environment, Climate and Food Safety and the Committee on the Internal Market and Consumer Protection (A10-0158/2025),

Recital 6 a (new)

1. Adopts its position at first reading hereinafter set out;

Amendment 5

2. Calls on the Commission to refer the matter to Parliament again if it replaces, substantially amends or intends to substantially amend its proposal;

Proposal for a regulation

3. Instructs its President to forward its position to the Council, the Commission and the national parliaments.

Recital 7

P10_TC1-COD(2023)0284

Amendment 6

Position of the European Parliament adopted at first reading on 18 June 2026 with a view to the adoption of Regulation (EU) 2026/… of the European Parliament and of the Council on circularity requirements for vehicle design and on management of end-of-life vehicles, amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2019/1020 and (EU) 2023/1542 and repealing Directives 2000/53/EC and 2005/64/EC

Proposal for a regulation

(Text with EEA relevance)

Recital 8

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Amendment 7

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof and Article 192(1) thereof in relation to Articles 14 to 36 of this Regulation,

Proposal for a regulation

Having regard to the proposal from the European Commission,

Recital 8 a (new)

After transmission of the draft legislative act to the national parliaments,

Amendment 8

Having regard to the opinion of the European Economic and Social Committee,

Proposal for a regulation

After consulting the Committee of the Regions,

Recital 9 a (new)

Acting in accordance with the ordinary legislative procedure,

Amendment 9

Whereas:

Proposal for a regulation

(1) The communication of the Commission of 11 December 2019 on the European Green Deal sets out Europe’s growth strategy that aims to transform the Union into a fair and prosperous society, with a modern, resource-efficient and competitive economy, where there are no net greenhouse gas emissions by 2050 at the latest and where economic growth is decoupled from resource use. In order for the Union’s product policies to contribute to lowering carbon emissions on a global level, it needs to be ensured that products marketed and sold in the Union are sourced, manufactured and treated at their end-of-life in a sustainable manner.

Recital 9 b (new)

(2) The automotive sector is an important contributor to the use of energy and material resources by the Union, and hence to the generation of greenhouse gases. The production of vehicles in third countries that are placed on the Union market contributes to the generation of global greenhouse gases, which in turn has a negative environmental impact on the Union. A shift from the use of fossil fuels in vehicles to zero emission mobility, as provided for in the ‘Fit for 55’ package, is one of the prerequisites for reaching the climate-neutrality goal by 2050. It will reduce the emissions of greenhouse gases from the automotive sector linked to the use phase of vehicles. The automotive industry is one of the largest users of primary aluminium, steel and plastics, linked to the manufacturing of new vehicles placed on the Union market. This can represent a significant environmental impact, linked to the energy required for the extraction and processing of these materials. The environmental footprint linked to the manufacturing of new vehicles could increase with the ongoing electrification of the fleet, the ongoing growth in size and weight of the vehicles, as well as due to more widespread use and complexity of electronics in future models, which both require a considerable amount of critical and strategic raw materials and precious metals, such as copper and rare earth elements. The result of those changes is that the production phase could have a larger environmental footprint than the use phase of vehicles, and that European industry could become more and more reliant on imports of critical raw materials and vulnerable to supply disruptions, to the detriment of its competitiveness. In addition, the current requirements in Union law on waste management result in a suboptimal recovery of resources from end-of-life vehicles, and there is a high potential to increase the quantity and quality of parts, components and materials to be repaired, reused, remanufactured, refurbished, retrofitted or recycled from vehicles during the use phase and from end-of-life vehicles. To address these environmental impacts and contribute to the decarbonisation of the sector, and support competitiveness by increasing the resilience of the automotive industry, it is necessary to improve the functioning of the single market and enhance the transition of the automotive industry to a circular economy. This is in line with the communication of the Commission of 11 March 2020 on a new Circular Economy Action Plan – For a cleaner and more competitive Europe which called for a revision of the current rules to promote more circular business models by linking design issues to end-of-life treatment, consider rules on mandatory recycled content for certain materials, and improve recycling efficiency. This is also in line with Regulation (EU) 2024/1252 of the European Parliament and of the Council. The Council and the European Parliament also stressed the need for new Union rules on those matters, replacing the existing rules on type-approval of vehicles when it comes to re-usability, recyclability and recoverability and on end-of-life vehicles.

Amendment 10

(3) Directive 2000/53/EC of the European Parliament and of the Council sets up harmonised treatment requirements for end-of-life vehicles and targets for vehicles’ reuse and recycling as well as reuse and recovery. It establishes obligations on collection of end-of-life vehicles, as well as obligations for economic operators, in particular restricting the use of heavy metals in vehicles. It also creates basic rules on extended producer responsibility, requiring vehicle producers to cover part of the costs of collection of end-of-life vehicles.

Proposal for a regulation

(4) The Commission’s evaluation of Directive 2000/53/EC highlighted that it has been effective in delivering many of its initial objectives, especially the elimination of cadmium, lead, mercury and hexavalent chromium from vehicles, an increase in collection points for end-of-life vehicles and the attainment of the recovery and recycling targets. However, the evaluation found that that Directive insufficiently addressed important issues linked to the collection of end-of-life vehicles and that it was no longer adapted to ensuring a high quality of treatment of these vehicles.

Recital 9 c (new)

(5) Directive 2005/64/EC of the European Parliament and of the Council regulates the typeapproval of vehicles in relation to their reusability, recyclability and recoverability, so that these vehicles could meet the targets established in Directive 2000/53/EC at their endof-life phase. However, Directive 2005/64/EC has not been effective in improving substantially the reusability, recyclability and recoverability of new vehicles and is not adapted to the features of new vehicles, which have considerably changed since the entry into force of Directive 2005/64/EC.

Amendment 11

(6) Regulation (EU) 2018/858 of the European Parliament and of the Council introduced a comprehensive type-approval and market surveillance system for motor vehicles, trailers, and for systems, components and separate technical units intended for such vehicles with a view to ensuring the proper functioning of the single market and in order to offer a high level of environmental performance. There is a need for a separate regulatory act for the purposes of the EU type-approval procedure laid down in Annex II to that Regulation. It is therefore necessary to lay down provisions and requirements on the circularity of vehicles which are in the process of obtaining EU type-approval. To ensure the compliance of vehicles with those requirements it is necessary to ensure their verification in the EU type-approval process. The administrative provisions of Regulation (EU) 2018/858, including the provisions on market surveillance, corrective measures, safeguard clauses, and penalties, apply to type-approvals issued in compliance with the requirements of this Regulation.

Proposal for a regulation

(7) It is important to distinguish between existing type-approvals and new type-approvals. It is therefore necessary to clarify which provisions apply to new vehicle types under Regulation (EU) 2018/858. It should therefore be clarified that amendments to the typeapproval do not systematically require an extension of type-approval under that Regulation.

Recital 10

(8) In order to improve the functioning of the single market, while ensuring a high level of protection of the environment, it is essential to harmonise the conditions for the typeapproval of vehicles when it comes to their reusability, recyclability and recoverability, ▌ the production stage ▌ of vehicles, the assessment of the status of the vehicle and the export of used vehicles. In order to contribute to the objectives of preserving, protecting and improving the quality of the environment, protecting human health, and the prudent and rational utilisation of natural resources, it is essential to lay down rules regarding the management of end-of-life vehicles, taking into account the design of the vehicle, as well as measures aiming to prevent illegal dismantling such as better traceability in the case of transfer of ownership of used vehicles ▌. The most efficient way of facilitating the transition of the automotive sector to a circular economy is therefore to establish a uniform regulatory framework at Union level, covering in an integrated and consistent manner the design, manufacturing, placement on the market in the Union and end-of-life treatment of vehicles. This is also essential for the development of the Union market for secondary raw materials which are included in new vehicles placed on the market, as well as to avoid barriers to trade and distortions of competition, ensure legal clarity and improve the environmental performances of all of the economic operators involved in the design, production and end-of-life treatment of vehicles. In order to achieve those objectives ▌, Directives 2000/53/EC and 2005/64/EC should be replaced by a Regulation, based on Article 114 and Article 192(1) of the Treaty on the Functioning of the European Union (TFEU).

Amendment 12

(9) In the outermost regions referred to in Article 349 TFEU, Member States should be able to adapt producers' obligations in order to guarantee a service and cover the costs of managing end-of-life vehicles with regard to the characteristics of those regions.

Proposal for a regulation

(10) Directives 2000/53/EC and 2005/64/EC apply only to passenger vehicles (M1) and light commercial vehicles (N1), which constitute approximately 85 % of all vehicles registered in the Union. The remaining vehicles, namely two- and three- wheel vehicles, quadricycles, lorries, busses and trailers, are not subject to any Union legislation concerning their eco-design and management at their end-of-life phase. Therefore, in order to ensure a comprehensive circularity framework for all vehicles registered in the Union, including their environmentally sound treatment, as well as to prevent fragmentation of the single market, this Regulation should apply not only to vehicles of categories M1 and N1, but, partially, also to certain L-category vehicles ▌, heavy-duty vehicles and their trailers (M2, M3, N2, N3 and O). There is a lack of comprehensive information regarding the treatment of such vehicles at their end-of-life in the Union, which prevents applying the same regime to them as the one applying to vehicles of categories M1 and N1 upon the entry into force of this Regulation. However, the requirements regarding the collection of end-of-life vehicles, their mandatory delivery to authorised treatment facilities for treatment as well as their depollution, the mandatory removal of certain parts and components for reuse and recycling prior to shredding and the conditions for landfill of non-inert waste from shredding should apply to L-category vehicles ▌ and heavy-duty vehicles and their trailers (M2, M3, N2, N3 and O). To facilitate treatment of these end-of-life vehicles, their manufacturers should be required to provide information on the removal and replacement of parts, components and materials from such vehicles. Also, the provisions governing the extended producer responsibility should apply to those vehicle categories, covering the costs of their collection and depollution at their end-of-life.

Recital 10 a (new)

(11) As not all Member States require the registration of L1e, L2e or L6e-category vehicles, it is necessary to give Member States the possibility to exempt those vehicle categories from requirements linked to registration.

Amendment 13

(12) Problems with exporting used vehicles concern not only passenger vehicles (M1) and light commercial vehicles (N1), but also, as studies show, larger vehicles. Therefore, these provisions should also apply to heavy-duty vehicles and their trailers (M2, M3, N2, N3 and O).

Proposal for a regulation

(13) Vehicles designed and constructed or adapted for use by the armed services only as well as vehicles designed and constructed for use by the armed services, civil defence, fire services, forces responsible for maintaining public order and emergency medical services should be excluded from the scope of this Regulation. Those vehicles serve specialised operational functions and are subject to specific technical requirements, and their design, construction and use differ significantly from those of vehicles intended for general road transport. The application of general circularity requirements for vehicle design and end-of-life management to such vehicles would therefore not be appropriate and their exclusion from the scope of this Regulation is consistent with the specific nature of their functions.

Recital 11

(14) In order to preserve Europe’s cultural heritage, vehicles of historical interest should be excluded from the scope of this Regulation and should not be subject to the obligations related to transfer of ownership or export, or to end-of-life requirements. Similarly, vehicles which are recognised by a Member State as having special cultural interest should be excluded from the scope of this Regulation. This can cover for instance vehicles in the possession of collectors or museums, custom-built vehicles or racing vehicles, provided that the competent authorities recognise their relevant special cultural interest. However, the requirements of this Regulation, such as for example circularity design requirements, should apply to those vehicles before they are considered vehicles of historical interest or vehicles of special cultural interest. Furthermore, when those vehicles are no longer considered by the Member States to be vehicles of historical interest or vehicles of special cultural interest, they fall back into scope of this Regulation and requirements such as obligations related to transfer of ownership, export or end-of-life, should apply.

Amendment 14

(15) To avoid excessive administrative burden and to ensure that the scope of this Regulation covers the needs of the internal market, other types of vehicles, such as of L-category vehicles produced in small series or certain cycles designed to pedal of L1e-A and L1e-B-category, should remain outside the scope of this Regulation.

Proposal for a regulation

(16) Special purpose vehicles are designed to perform a specific function and require special bodywork arrangements which are not entirely under the control of the manufacturer. This complicates the calculation of reusability, recyclability and recoverability rates. For special purpose vehicles of category M1 and N1, the costs of collection, depollution, mandatory removal for parts and components and treatment should be covered by producers within the extended producer responsibility scheme. For special purpose vehicles of categories M2, M3, N2, N3 and O only a limited set of rules should apply. Provisions on substances of concern in vehicles should apply to special purpose vehicles of categories M1 and N1, as it is the case under Directive 2000/53/EC. Other parts of a special purpose vehicle that have been type-approved in multi-stage type-approval should be covered to the same extent as the category of the vehicle concerned. Special purpose vehicles of all categories except M1 and N1 that are produced by a small-volume manufacturer should not be covered by this Regulation.

Recital 13

(17) Motor caravans and trailer caravans are distinct from conventional vehicles or trailers, as their primary function is accommodation rather than transportation. Those caravans are built with non-automotive components, such as wood, furniture, water systems and household electrical systems, which are outside the scope of vehicle recycling facilities. Many trailer caravans are permanently fixed in place as holiday homes, used for seasonal accommodation, and remain functional for decades. Given their specialpurpose nature, distinct material composition, and ongoing use, trailer caravans should be excluded from the scope of this Regulation. Motor caravans, which are often unregistered, should not be classified as end-of-life vehicles as long as they continue to be used as housing. Motor caravans have in their base vehicles parts and components that are also used in other vehicles and should therefore be subject to the same obligations once they are no longer used for housing purposes.

Amendment 15

(18) One of the biggest practical challenges related to the application of Directive 2000/53/EC concerns the determination whether or not a vehicle has become an end-of-life vehicle, in particular in cases of transboundary shipments of vehicles. Despite the issuance of guidance on that issue, such assessment remains problematic. It is therefore necessary to provide legally binding precise criteria allowing to determine an end-of-life vehicle. Those criteria should be used by all relevant competent authorities, economic operators and vehicle owners dealing with end-of-life vehicles. It is however also necessary to provide for exemptions in order to preserve the possibility for Member States to determine situations in which individual vehicles should not fall under the scope of this Regulation due to their status as a vehicle of special cultural interest for as long as they maintain that status. In addition, competent authorities of a Member State should be able to exempt a vehicle from the status of end-of-life vehicle when the vehicle concerned is subject to repair, upon request from its owner.

Proposal for a regulation

(19) The evaluation of Directive 2000/53/EC concluded that the provisions in that Directive on the design of vehicles aimed at facilitating their dismantling and the uptake of recycled materials had a very limited impact on the design and manufacturing of new vehicles, as they were not sufficiently detailed, specific and measurable.

Recital 13 a (new)

(20) Addressing the design of all vehicles placed on the Union market as well as their end-of-life phase requires the setting up of harmonised circularity requirements verified at the type-approval stage. Designing and manufacturing vehicles to ensure that their parts and components are reusable, and the materials that they contain are recyclable, is essential to avoid that these parts, components and materials cannot be properly valorised when a vehicle reaches the end of its life. Therefore, manufacturers and their suppliers should integrate design strategies that improve reusability and recyclability at an early stage in the development of new vehicles. Accordingly, new vehicle types should continue to be constructed so as to be reusable or recyclable to a minimum of 85 % by mass and reusable or recoverable to a minimum of 95 % by mass, as already provided for in Directive 2005/64/EC. In order to ensure that the calculation of the reusability, recyclability and recoverability rates is done in a uniform manner and can be monitored, a new methodology for calculation and verification of the rates of reusability, recyclability and recoverability of a vehicle should be established. That methodology should better reflect the actual potential of a new vehicle to be recycled, reused and recovered at the endof-life, while taking into account the ongoing technological progress. In order to ensure uniform conditions for the implementation of this Regulation, implementing powers should be conferred on the Commission to establish such methodology, taking into account international standard ISO 22628:2002. Until such methodology is established, the rates of reusability, recyclability and recoverability should continue to be calculated in accordance with international standard ISO 22628:2002, as in Directive 2005/64/EC. The Commission should endeavour to ensure that the relevant UNECE (United Nations Economic Commission for Europe) methodology is updated accordingly, in order to avoid inconsistencies with the Union methodology and to reduce the burden on manufacturers.

Amendment 16

(21) The automotive supply chain involves a large number of suppliers, including many small and mediumsized enterprises (SMEs) operating in different regions and with diverse organisational structures. While manufacturers should collect information throughout the supply chain on the materials used in vehicles and establish and implement procedures to verify the accuracy of such information, they should take into account the capacities of SMEs. SMEs often have limited administrative resources, fewer technical tools and, in some cases, no established systems to generate or verify detailed environmental or materialcomposition data. Those constraints can affect the availability and completeness of the information that SMEs are able to provide. Accordingly, when assessing manufacturers’ procedures for collecting and verifying supplier information, the specific situation of SMEs in the supply chain should be duly considered.

Proposal for a regulation

(22) Ensuring the reparability of vehicles throughout their lifespan is a fundamental pillar of a truly sustainable and circular automotive economy. Vehicles should not be prematurely classified as end-of-life when they remain repairable, as this would lead to unnecessary waste, economic inefficiencies, and an undue burden on vehicle owners.

Recital 13 b (new)

(23) Vehicles should be designed and manufactured in a way as to limit the presence of substances of concern. In its communication of 14 October 2020 on Chemicals Strategy for Sustainability – Towards a Toxic-Free Environment , the Commission stated that substances of concern are to be minimised and substituted as far as possible, phasing out the most harmful ones for non-essential societal use, in particular in consumer products. Accordingly, substances of concern as constituents of materials used in vehicles or of any of the parts or components of vehicles should be minimised as far as possible to ensure that vehicles, as well as materials recycled from vehicles, do not have an adverse effect on the environment or human health, throughout their life-cycle.

Amendment 17

(24) Directive 2000/53/EC already restricts the use of lead, mercury, cadmium and hexavalent chromium in vehicles and provides exemptions where such substances are permitted to be used in certain applications. This Regulation should take over those existing rules. However, in order to ensure the coherence of legislation on chemicals, restrictions regarding placing on the market and use of other substances in vehicles should be addressed under Regulation (EC) No 1907/2006 of the European Parliament and of the Council. Similarly, restrictions on the use of substances regulated by Regulation (EU) 2019/1021 of the European Parliament and of the Council should be respected based on provisions of that Regulation. ▌

Proposal for a regulation

(25) To facilitate compliance with this Regulation and provide guidance on the presence of substances of concern in vehicles and in their parts and components, including those which hamper reuse and recycling of materials, or have adverse effects on health or on the environment, it is appropriate for the Commission to carry out an assessment and mapping of such substances. To that end, the Commission, assisted by the European Chemicals Agency established under Regulation (EC) No 1907/2006 (the ‘Agency’), should prepare a report on the presence of substances of concern in vehicles. That report should identify the extent to which such substances hinder reuse and recycling or adversely affect health or the environment, without duplicating assessments already required under other Union legislation. On the basis of its findings, the Commission should consider and take appropriate follow-up measures, including, where relevant, the adoption of delegated acts to establish information requirements and restrictions for substances of concern that negatively affect the reuse and recycling of materials for reasons not primarily related to chemical safety.

Recital 15

(26) Directive 2000/53/EC provides exemptions to the restrictions on the use of lead and cadmium in batteries used in vehicles, which are taken over by this Regulation. However, the use of substances in batteries is comprehensively regulated in Regulation (EU) 2023/1542 of the European Parliament and of the Council. Therefore, such substances should be addressed in, and eventually their restrictions and related exemptions transferred, as appropriate, to that Regulation by means of an amending provision set out in this Regulation. ▌

Amendment 18

(27) In order to take account of scientific and technical progress, the power to adopt delegated acts in accordance with Article 290 TFEU should continue to be delegated to the Commission in respect of amending exemptions from restrictions on the use of lead, mercury, cadmium and hexavalent chromium in vehicles under this Regulation. Modifying or deleting such exemptions should be preceded by an assessment of the socio-economic impacts of such change, which is absent in Directive 2000/53/EC, including consideration of the availability of alternative substances and the impacts on the environment and on human health across the lifecycle of vehicles. Before adopting such a delegated act, the Commission should consult relevant experts and stakeholders in order to take into account socio-economic impacts and impacts on the environment and on human health. To ensure effective decision-making, coordination and management of the technical, scientific and administrative aspects of amending this Regulation with respect to restrictions on use of substances in vehicles, the Agency should assist the Commission in such assessment.

Proposal for a regulation

(28) To increase circularity in the automotive sector, vehicles should progressively be designed and manufactured in such a way which incorporates recycled materials instead of primary raw materials, while maintaining the safety performance of vehicles. The use of recycled materials allows for a more resource-efficient use of materials, decarbonises production and reduces negative environmental impacts related to the use of primary raw materials. Increased circularity for the vehicles manufactured in third countries that are placed on the Union market will also contribute to reducing greenhouse gas emissions globally, including in the Union. It also strengthens the Union’s strategic autonomy and competitiveness by reducing raw material and energy dependencies linked to the supply of primary raw materials, particularly by contributing to retain valuable critical raw materials within the Union and at the same time reinforcing the market for secondary raw materials. Although there are no requirements concerning the use of recycled content on a global level, many manufacturers have already incorporated recycled materials in their vehicles. Establishing targets and uniform provisions on how to calculate the recycled content will provide legal certainty and contribute to creating fair competition between manufacturers. The requirements should apply to all manufacturers intending to place vehicles on Union’s market, including through online market places, irrespective of where they are based. Acknowledging the importance of global value chains in the automotive sector, this Regulation should allow for sourcing the secondary raw materials from outside the Union.

Recital 15 a (new)

(29) In view of the low recycling rate for plastics, especially from end-of-life vehicles, and the overall negative impacts of other forms of treatment of plastic waste, it is appropriate to increase the uptake of recycled plastics in vehicles. To that end, a mandatory target for plastic recycled from post-consumer waste should be included in new vehicles. Accordingly, each vehicle type should contain ▌ plastic recycled from post-consumer plastic waste with progressively rising percentages. Of this recycled content target for plastics in vehicle types, 20 % should be achieved by including plastics recycled from end-of-life vehicles. The selection of plastics covered in the scope of targets is based on the recyclable types of plastics that are specified in the dedicated Joint Research Centre study entitled ‘Towards recycled plastic content targets in new passenger cars and light commercial vehicles – Technical proposals and analysis of impacts in the context of the review of the ELV Directive’ and the impact assessment of this Regulation. In those documents, thermosets other than polyurethane foams in seats and elastomers are not considered in the calculation of the targets, given that thermosets are particularly challenging to recycle. Many common elastomers, thermosets and crosslinked materials do fulfil the polymer definition as referred to in the definition of plastics set out in Regulation (EC) No 1907/2006. Elastomers, including thermoplastic elastomers, which can be reprocessed into thermoplastics, are included within the scope of the recycled content targets for plastics provided for in this Regulation. However, recycled content targets for elastomers in tyres are being considered, as tyres are a priority product under Regulation (EU) 2024/1781 of the European Parliament and of the Council and therefore not covered by the scope of this Regulation. In order to ensure uniform conditions for the implementation of that obligation, implementing powers should be conferred on the Commission to establish methodology for the calculation and verification of the share of plastics recycled from post-consumer waste, and of post-consumer waste from end-of-life vehicles. To allow recycling methods other than mechanical recycling, including chemical recycling, and to contribute to the attainment of the recycled content targets, it is necessary to establish additional rules for the calculation, verification and reporting of recycled plastic content. In such cases, it is necessary to introduce so-called mass balance accounting in line with mass balance accounting methodologies applicable to plastics recycling, taking into account the characteristics of dedicated recycling technologies for plastics, such as in heterogeneous shredded automotive waste. Where the lack of availability or excessive prices of specific recycled plastics makes compliance with the minimum percentages excessively difficult, the Commission should be empowered to supplement this Regulation by laying down temporary derogations to the recycled plastic content targets.

Amendment 19

▌

Proposal for a regulation

(30) The promotion of the use of recycled plastic in vehicles is based on the premise that the recycled content itself was produced in an environmentally sustainable way, so that the carbon footprint is reduced and the circular economy is encouraged. To that end, certain safeguards need to be put in place in order to ensure that the way in which recycled content is obtained does not cancel out the environmental benefits of using such recycled content in vehicles. It is therefore necessary to address the related environmental concerns in a non-discriminatory manner with regard to both domestically produced and imported recycled plastic. To that end, in order to be counted towards the recycled content targets set out in the Regulation, recycled plastics should be subject to equivalent conditions with regard to requirements for the protection of human health, climate and environment, including on emissions and waste management, regardless of whether the recycling process happens within or outside the Union.

Recital 16

(31) The conditions applicable to material recycled in third countries, including the audit requirements, should only apply from … [48 months from the date of entry into force of this Regulation] and the Commission should more comprehensively assess the expected impact of those conditions in the light of the evolution of the market situation and of trade relations and should report its assessment to the European Parliament and to the Council by … [24 months from the date of entry into force of this Regulation.]

Amendment 20

(32) In order to achieve the targets for the integration of recycled content under this Regulation, the Commission should publish, by … [72 months from the date of entry into force of this Regulation], a review of the state of technological development and environmental performance of biobased plastic and of elastomers derived from the reprocessing of tyres in vehicles, and, where appropriate, present a legislative proposal with sustainability requirements and targets.

Proposal for a regulation

(33) The automotive sector is one of the biggest users of steel and the current uptake of recycled steel in new vehicles remains low. In order to contribute to lowering the carbon footprint linked to the production of new vehicles and support the move of the automotive industry towards climate neutrality, a minimum share of steel recycled from post-consumer steel waste and, where relevant, ferrous scrap in new vehicles should be set . The power to adopt acts in accordance with Article 290 TFEU should therefore be delegated to the Commission in respect of establishing a minimum share of steel recycled from postconsumer steel waste and, where relevant, ferrous scrap including flat and long carbon steel and possibly stainless-steel product families, to be present in and incorporated into vehicle types. The establishment of a future target should be preceded by a dedicated study by the Commission covering all relevant technical, environmental and economic factors linked to the feasibility of such target, including impacts on other steel using sectors and global greenhouse gas emissions. It is important to distinguish between various steel product families within the vehicle, as they are produced using different technologies that have various constraints for the utilisation of ferrous scrap regarding their ability to tolerate copper content and other tramp elements. In order to supplement certain non-essential elements of this Regulation, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of establishing a methodology for the calculation and verification of the share of steel recovered from postconsumer steel waste and, where relevant, ferrous scrap present in and incorporated into the vehicle type.

Recital 17

(34) The automotive sector is also one of the biggest users of aluminium, representing more than 40 % of Union total demand, and the use is increasing. The current uptake of recycled aluminium in new vehicles is low. In order to contribute to lowering the carbon footprint linked to the production of new vehicles and support the move of the automotive industry towards climate neutrality, reduce energy consumption and costs, and enhance resilience by reducing dependencies on primary raw materials supplies, it is appropriate to increase the uptake of recycled aluminium in vehicles. To that end, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of establishing a minimum share of aluminium and its alloys recycled from post-consumer waste in vehicle types and, if applicable, from pre-consumer waste, present in and incorporated into vehicle types. The establishment of a future target should be preceded by a dedicated study by the Commission covering all relevant technical, environmental and economic factors linked to the feasibility of such target. In order to supplement certain non-essential elements of this Regulation, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of establishing a methodology for the calculation and verification of the share of aluminium and its alloys recovered from post-consumer waste and, if applicable, from pre-consumer waste present in and incorporated into the vehicle type.

Amendment 21

(35) There is a potential to increase the use of recycled content in vehicles for other materials commonly used by the automotive industry for which markets for secondary raw materials are underdeveloped, the footprint linked to the production of primary raw materials is high or recycling levels are limited, while sorting and recycling technologies are improving. It is therefore appropriate for the Commission to assess the desirability, feasibility and impacts of setting out targets on recycled content of neodymium, dysprosium, praseodymium, terbium, samarium, nickel, cobalt, boron used in permanent magnets as well as for magnesium and its alloys. ▌

Proposal for a regulation

(36) In order to boost the underdeveloped markets for secondary raw materials, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of establishing a minimum share of magnesium and its alloys, neodymium, dysprosium, praseodymium, terbium, samarium, nickel, cobalt or boron recycled from post-consumer waste that shall be present in and incorporated into the vehicle types. In order to supplement certain non-essential elements of this Regulation, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission to establish methodology for the calculation and verification of the shares of those materials recycled from post-consumer, and where relevant, pre-consumer waste in vehicle types. The methodology is necessary to clarify the definitions of post-consumer scrap and pre-consumer scrap. This is relevant to incentivise the improvement of quality and the retainment of value ▌ for post-consumer waste fractions. In order to promote decarbonisation via the use of more recycled content, clear definitions are necessary to incentivise the recycling of post-consumer scrap, while minimising the use of pre-consumer scrap, which usually carries the same carbon footprint as the primary raw material.

Recital 18

(37) In line with the requirements of Regulation (EU) 2024/1252 ▌, and considering that it is necessary to establish in this Regulation provisions on recycled content in vehicles and information on the removal of parts and components containing permanent magnet materials in vehicles, those provisions should apply as the sector specific implementation of the provisions contained in Regulation (EU) 2024/1252. This will ensure streamlining and integrating various obligations related to information on the removal of such parts and components under this Regulation with those for other parts and components. The obligations relating to labelling in Article 28 of Regulation (EU) 2024/1252 apply.

Amendment 22

(38) In order to ensure that batteries are recycled in accordance with the requirements of Regulation (EU) 2023/1542, and that e-drive motors, which contain important quantities of rare earth elements, can also be replaced and recycled, it is necessary to introduce design requirements for new vehicle types, ensuring that these batteries and their battery packs and e-drive motors can be removed in a readily manner by authorised treatment facilities or repair and maintenance operators during any phase of the life-cycle of a vehicle. The Commission should also encourage the development of standards for design and assembly techniques that facilitate the maintenance, repair and repurposing of batteries and battery packs. More broadly, to maximise the potential for replacement, reuse, recycling, remanufacturing or refurbishing of vehicle parts and components, and to minimise waste, vehicles should be designed in a manner that enables the removal of as many parts and components as possible. The notion of technical feasibility should be interpreted in a manner that supports and facilitates those objectives, while recognising that, in certain cases, safety or functional requirements of a part can justify alternative solutions that limit the removability of a part or component. In such instances, manufacturers should demonstrate the necessity of such a choice. In order to take into account technical and scientific progress, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of amending this Regulation by revising the list of parts and components that are to be designed for removal and replacement from vehicles. In order to ensure uniform conditions for the implementation of this design requirement, implementing powers should be conferred on the Commission.

Proposal for a regulation

(39) The type-approval system laid down in Regulation (EU) 2018/858 requires manufacturers to construct their vehicles, systems, components and separate technical units in conformity with an approved vehicle type. To ensure that manufacturers comply with the circularity requirements that are applicable to them at type-approval stage and which are laid down in this Regulation, and that type-approval authorities can verify compliance, it is necessary for manufacturers to include the information required for the type-approval procedure in the information folder. To increase transparency and ensure that the required type-approval information is presented in a manner coherent with the requirements in other legislation governing type-approval requirements for vehicles, the Commission should amend the rules established in Commission Implementing Regulation (EU) 2020/683 which standardise the documents and information to be included into the information folder and thus specify the administrative requirements for type-approval.

Recital 19

(40) In order to ensure that manufacturers of passenger cars and light commercial vehicles put in place actions to ensure that they meet the circularity requirements under this Regulation, and to incentivise them to improve the circularity of the vehicles, they should draw up a comprehensive circularity strategy. The circularity strategy should be prepared at the manufacturer level and updated every five years. A copy should be provided to the type-approval authorities as well as to the Commission. Although provided to the type-approval authorities, the circularity strategy should not be linked to the type-approval process. To ensure broader oversight and scrutiny, the Commission should make the manufacturers’ circularity strategies, as well as their updated versions, publicly available, with due regard to the safeguarding of any confidential information. The Commission should prepare and publish, at least every six years, a report on the circularity of the automotive sector based on, among other information, the circularity strategies provided by the manufacturers. ▌

Amendment 23

(41) In order to increase transparency on the use of recycled materials by the automotive sector and provide incentives to increase recycled content levels, manufacturers should be required to provide technical documentation showing the percentage of recycled materials present in new vehicle types which are submitted for type-approval. That requirement should apply to a selection of materials for which an increase in recycled content level in vehicles would bring about particularly important environmental benefits. The mandatory declaration should be submitted to the type-approval authority together with other documents as part of the application for type-approval.

Proposal for a regulation

(42) Access to up-to-date information and timely communication between manufacturers and waste management operators across the automotive value chain are essential to maximise reuse, remanufacturing and refurbishment of parts and components of a vehicle and to ensure highquality recycling of end-of-life vehicles. Therefore, manufacturers should provide to waste management operators and repair and maintenance operators unrestricted, standardised and non-discriminatory access to information, including via existing tools used by the automotive industry, enabling safe removal of certain parts, components and materials present in a vehicle. Manufacturers should not be obliged to provide such information to repair and maintenance operators where that information has already been made available pursuant to other Union legislation. The information should provide guidance for the waste management operators, publishers of technical information and repair and maintenance operators on the steps required to access and remove electric vehicle batteries and their battery packs, including on the tools or technologies enabling their safe discharge, and e-drive motors. The information should also provide clear instructions on the use of tools or technologies for that access and removal. It should help to identify, locate and remove the parts, components and materials, that should be depolluted and removed from the vehicle prior to shredding, as well as parts and components, containing the critical raw materials in permanent magnets referred to in Regulation (EU) 2024/1252. Manufacturers should also make available rescue and emergency response guidance information to emergency services. It is important that intellectual property rights are duly respected, ensuring that access to technical information does not compromise proprietary technologies or trade secrets. This should be done through communication platforms established by manufacturers and the information should be provided free of charge, excluding non–prohibitive administrative costs. The type-approval authorities should verify that the required information has been submitted by the manufacturers. Taking into account the need to support the vehicles retrofitting as a way to reduce emissions, extend vehicle lifespans, and promote sustainability, manufacturers should also ensure a proper cooperation with retrofit operators ▌.

Recital 19 a (new)

(43) Access of aftermarket operators to information on the removal of parts and components from end-of-life vehicles, including with a view to the future replacement of those parts and components, should be guaranteed to safeguard consumer choice and ensure the efficient use of resources. It is therefore necessary to ensure that waste management operators and publishers of technical information are provided with the information necessary for safe and effective removal of such parts and components from the end-of-life vehicles. Furthermore, such information should be provided to operators pursuing an activity involving the repair and maintenance of vehicles, where they do not qualify as waste management operators and only in cases where such provision of information is not already covered by other Union legislation.

Amendment 24

(44) While digital coding is increasingly used to control different parts and components in vehicles, the evaluation of Directive 2000/53/EC identified that such coding could impede the reuse, remanufacturing and refurbishment potential of certain parts and components. It is therefore essential that manufacturers are requested to provide information allowing professional waste management operators and repair and maintenance operators to overcome the problems posed by these digitally coded parts and components in a vehicle, where such coding prevents repair, maintenance or replacement operations in another vehicle.

Proposal for a regulation

(45) Manufacturers and their suppliers should use component and material coding standards, which were established initially by Commission Decision 2003/138/EC, for labelling and identification of vehicles’ plastic and elastomer parts, components and materials. They should ensure that all parts and components of vehicles are marked in accordance with other applicable Union legislation, in particular concerning labelling of batteries and of permanent magnets included in vehicles that they place on the market. In order to take into account the technical and scientific progress, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of amending the Annex specifying how parts and components of vehicles should be labelled.

Recital 20

(46) In order to facilitate the end-of-life treatment of vehicles, manufacturers should provide, via digital tools, accurate, complete and up-to-date information on the safe removal and replacement of vehicle parts and components. A digital circularity vehicle passport should therefore be developed and made available as a data carrier for such information, in a manner that is consistent with other digital information tools and platforms that already exist or are in further development in the automotive sector on the environmental performance of vehicles and aligned with corresponding provisions in Regulations (EU) 2023/1542, (EU) 2024/1781 and (EU) 2024/1257 of the European Parliament and of the Council. In order to ensure uniform conditions for the implementation of this Regulation, implementing powers should be conferred on the Commission to lay down the technical design and operation requirements for the passport and rules on location of the data carrier or other identifier enabling accessing the passport on the vehicle. When laying down the rules for the digital circularity vehicle passport, the Commission should take into account the need for the high level of security and privacy, including on vehicles’ operating data to prevent cybersecurity threats.

Amendment 25

(47) In order to ensure that producers and other economic operators are subject to the same rules across the Member States, it is necessary to lay down harmonised rules for waste management of end-of-life vehicles. This should lead to a high level of protection of the environment and human health across the Union. It would also result in further harmonisation of the quality of waste management services provided by economic operators and in facilitating the functioning of the market for secondary raw materials.

Proposal for a regulation

(48) In order to guarantee the safe and environmentally sound treatment of end-of-life vehicles, any establishment or undertaking intending to perform waste treatment operations for these vehicles should obtain an authorisation from the competent authority. The authorisation should be granted only if the establishment or undertaking has the ▌ capacity needed to carry out the end-of-life treatment operations for vehicles in a manner that complies with applicable Union and national law, including the specific treatment requirements established in this Regulation. Additionally, only authorised treatment facilities should have the competence to issue certificates of destruction in accordance with this Regulation.

Recital 20 a (new)

▌

Amendment 26

(49) Where producers or producer responsibility organisations conclude contracts with authorised treatment facilities for the purpose of fulfilling their producer responsibility obligations, these contracts should be in compliance with the principles of competition law and should not include provisions that have the purpose or effect of restricting or distorting competition, in particular within the meaning of Articles 101 and 102 TFEU. Such contracts should be fair, transparent and should not contain discriminatory terms and conditions. In order to facilitate compliance with those requirements, Member States should be able to provide a model contract.

Proposal for a regulation

(50) Directive 2000/53/EC establishes a basic obligation for vehicle producers to cover part of the costs of collection of end-of-life vehicles. Building on this obligation, in line with the polluter-pays principle and consistent with the general minimum requirements for extended producer responsibility schemes set out in Directive 2008/98/EC of the European Parliament and of the Council, it is appropriate to lay down at Union level requirements on the responsibilities of manufacturers relating to the management of end-of-life vehicles. Producers should have extended producer responsibility for the vehicles that they make available on the market for the first time within the territory of a Member State once they reach their end-of-life phase. The extended producer responsibility should cover the obligations to ensure that the vehicles made available by the producers on the market in a Member State are collected and treated in accordance with this Regulation and that waste management operators treating such vehicles meet the recycling targets established by this Regulation.

Recital 21

(51) In order to facilitate monitoring of compliance of producers with their extended producer responsibility obligations, Member States should establish a register of producers or use an existing register. The registration requirements should be harmonised across the Union to facilitate registration, in particular where producers make vehicles available in different Member States. The register should also be used for the purpose of reporting to competent authorities on the performance of extended producer responsibility obligations. The features and procedural aspects linked to such register should also be consistent with the register of producers established by Regulation (EU) 2023/1542, in order to enable producers of vehicles and producers of batteries to use one and the same register. In order to facilitate the registration of producers in all Member States, the Commission should establish a website containing the links to all national registers.

Amendment 27

(52) Under Article 30 of Regulation (EU) 2022/2065 of the European Parliament and of the Council, providers of online platforms allowing consumers to conclude distance contracts with traders are to ensure that traders can only use those online platforms to promote messages on, or to offer, products or services to consumers located in the Union if, prior to the use of those platforms for those purposes, the providers of those platforms have obtained certain information, where applicable to the trader. In this context, vehicles constitute products. The register of producers established under this Regulation can constitute a public register for the purpose of compliance with Article 30(1), point (d), of Regulation (EU) 2022/2065. A self-certification by the trader to commit to offering only products or services that comply with the applicable rules of Union law pursuant to Article 30(1), point (e), of Regulation (EU) 2022/2065 can also cover the extended producer responsibility requirements laid down under this Regulation. Finally, for the purposes of Article 30(2) of Regulation (EU) 2022/2065, where the information in the register of producers is not publicly accessible, Member States should ensure that providers of online platforms are granted access, free of charge, to that information, in order to make best efforts to assess whether the information is reliable and complete.

Proposal for a regulation

(53) Where a producer makes vehicles available on the market for the first time within a territory of a Member State in which that producer is not established, that producer should designate an authorised representative for the extended producer responsibility. If more than one producer is represented in a Member State by one authorised representative, that authorised representative should provide the name and the contact details for each of the represented producers separately.

Recital 22

(54) Producers should be able choose whether they will exercise their extended producer responsibility obligations individually or collectively, by means of producer responsibility organisations taking responsibility on their behalf. Nevertheless, Member States should be able to require that a producer be represented by a producer responsibility organisation. In such cases, producers should not be required by the Member State to be represented by a specific producer responsibility organisation, since there should be flexibility as regards how many producer responsibility organisations can be present in a Member State. This should also be the case in Member States with state-run producer responsibility organisations which can be subject to more specific arrangements under national law. While Member States' legal frameworks allow different governance structures, producer responsibility organisations should in principle operate to ensure that fees collected from producers are used exclusively to fulfil the obligations relating to collection and treatment of end of life vehicles for the organisation and financing of wastemanagement obligations. All producer responsibility organisations should ensure the confidentiality of data provided to them by producers. In order to ensure that the interests of all economic operators are properly taken into consideration and to avoid a situation in which waste management operators are placed at a disadvantage in the decisions taken in extended producer responsibility schemes, for example producer responsibility organisations could at least once a year conduct a structured consultation with interested stakeholders and publish on their website a summary report of that consultation, setting out the principal comments received together with an explanation of how those comments have been addressed. Waste management operators should be granted observer status in the governing bodies of the producer responsibility organisations, namely in their executive boards, in order to improve the overall governance and efficiency of the system, while respecting the need to avoid conflict of interest. In addition, waste management operators should be selected by producer responsibility organisations in a non-discriminatory procedure based on transparent award criteria.

Amendment 28

(55) Producers should finance part of the costs of collection and treatment of end-of-life vehicles necessary to meet the requirements established in this Regulation, in particular obligations aimed at ensuring higher quality of secondary raw materials retrieved from vehicles. The exact level of the costs of such operations that should be covered by producers should be determined taking into account the revenues of authorised treatment facilities and other waste management operators gained from sale of used spare parts or components and of secondary raw materials retrieved from end-of-life vehicles. To this end, the competent authorities, in cooperation with producers and waste management operators, should monitor the average costs of collection, recycling and treatment operations as well as the level of financial contributions paid by the producers in order to ensure that a fair allocation of costs between all interested operators is in place.

Proposal for a regulation

(56) The financial contribution of producers should also cover the cost of educational campaigns aimed to inform the public and increase the collection of end-of-life vehicles, as well as of the establishment of the notification system for issuance and transfer of certificates of destruction and gathering and reporting of data to the competent authorities. In addition, since this Regulation introduces changes regarding the financial responsibility of producers for the collection of end-of-life vehicles covered by Directive 2000/53/EC, appropriate provisions should be made to take into account the transition from Directive 2000/53/EC to this Regulation.

Recital 23

(57) Producers who choose to fulfil their extended producer responsibility obligations individually should also provide a guarantee to be used to cover the costs of management of end-of-life vehicles. Such guarantees should be used in particular in cases where the producers concerned become insolvent or permanently cease their operations.

Amendment 29

(58) Where a producer exercises its extended producer responsibility obligations collectively within a producer responsibility organisation, the financial contributions paid by the producer should be modulated based on harmonised criteria. Such criteria should create economic incentives for the manufacturers to increase circularity in the design and production of new vehicles, taking into consideration the amount of primary and recycled materials in a vehicle, the extent to which it contains parts, components and materials which are difficult to remove, dismantle, reuse or recycle, as well as the amount of hazardous substances that it contains. In order to avoid distortion of the single market, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of supplementing this Regulation by establishing detailed rules on how the criteria for the modulation of the financial contributions paid to producer responsibility organisations should be applied.

Proposal for a regulation

(59) Certain Member States have already established extended producer responsibility structures and waste management systems, which are the basis for relevant national authorisations and contractual arrangements, when implementing Directive 2000/53/EC. Those Member States should be able to continue to use those structures and systems, provided that they comply with this Regulation.

Recital 24

▌

Amendment 30

(60) ▌Vehicles often become end-of-life vehicles in a Member State other than the Member State where they were placed on the market. As long as a producer within the meaning of this Regulation can be identified in the Member State where the vehicle becomes an end-of-life vehicle, that producer should cover the related costs of collection and treatment. However, as it is not always possible to identify a producer in the Member State where the vehicle becomes an end-of-life vehicle after it has crossed a border, it is also necessary to introduce rules on a cross-border cost allocation mechanism which should apply only to that specific situation and only for vehicles in category M1 and N1. Those rules should ensure that the costs of collection and treatment ▌ incurred by the waste management operators in the Member State where the vehicle becomes an end-of-life vehicle are covered. The obligations stemming from the cross-border cost allocation mechanism, including the appointment of authorised representatives in each Member State, should not apply to importers or distributors, to avoid administrative burden for such operators. Each manufacturer of vehicles in categories M1 and N1 should be obliged to appoint an authorised representative for the cross-border mechanism in each Member States, notify the competent authorities about the designations and set up mechanisms for cross-border cooperation with relevant waste management operators. Manufacturers should be able to mandate a producer responsibility organisation to act as their authorised representative for the cross-border mechanism. For manufacturers established outside of the Union, it should be possible to appoint the manufacturer’s single representative in the Union referred to in Article 13(4) of Regulation (EU) 2018/858 to fulfil the obligations for the cross-border mechanism and to establish cross-border cooperation mechanism. Introducing such a cross-border mechanism contributes to creating a level playing field between the authorised treatment facilities across the Union ▌.

Proposal for a regulation

(61) In order to ensure compliance with these obligations and to avoid distortion of the single market, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of establishing further detailed rules on the obligations of the producers, Member States and waste management operators and the features of the cross-border mechanisms.

Recital 26

(62) A key prerequisite for the sound treatment of end-of-life vehicles is that all end-of-life vehicles are collected. This Regulation should therefore impose certain obligations linked to the collection primarily on the producers and, secondarily, on the Member States. Producers should ensure that all end-of-life vehicles that they have made available on the market for the first time in the territory of a Member State are collected. To that end, producers or producer responsibility organisations should set up or participate in setting up the collection systems ▌ and Member States should adopt all necessary measures to ensure that the collection systems are in place and that those systems enable meeting the objectives of this Regulation. The collection systems should enable vehicle owners and other vehicle holders to deliver the vehicle to an authorised treatment facility or collection point without unnecessary efforts or costs. This means in practice that such systems should appropriately cover the whole territory of each Member State and ensure adequate availability of authorised treatment facilities or collection points. They should also allow for collection of all brands of end-of-life vehicles, as well as of waste parts from repair of vehicles.

Amendment 31

(63) End-of-life vehicles should be treated only in authorised treatment facilities, thus such facilities play a vital role in collection of the end-of-life vehicles. Nevertheless, in order to facilitate collection and ensure adequate availability of facilities collecting end-of-life vehicles, this Regulation provides for a possibility for establishing collection points. The role of such points would be limited to collecting end-of-life vehicles, storing them in proper conditions and transporting them to the authorised treatment facility. Operating such a point requires a specific permit. Collection points should be required to deliver all collected end-of-life vehicles to authorised treatment facilities.

Proposal for a regulation

(64) In order to effectively collect all end-of-life vehicles it is necessary to inform the public on the existence of collection systems. Vehicle owners should be aware that they can in principle deliver an end-of-life vehicle, with or without the electric vehicle battery, to a collection point or authorised treatment facility free of charge, unless essential parts such as the e-drive motor, engine or multiple large pieces of the bodywork are missing, in order to curtail illegal dismantling activities. In the case of a missing electric vehicle battery, the vehicle owner should prove that the battery has been handled by a professional operator in accordance with Regulation (EU) 2023/1542. In order to prevent the illegal dismantling of valuable parts and components from end-of-life vehicles and promote the collection of complete end-of-life vehicles, the free of charge delivery of end-of-life vehicles could be linked to the provision of financial incentives. The educational campaign by producers or producer responsibility organisations should also present the consequences for the environment and human health of improper collection and treatment of end-of-life vehicles.

Recital 28

(65) The authorised treatment facility should issue a certificate of destruction to the last vehicle owner upon delivery of the end-of-life vehicle ▌. This is necessary to ensure a proper supervision of management of end-of-life vehicles. The minimum requirements for such certificates are currently laid down in Commission Decision 2002/151/EC and the content of that Decision should be included in this Regulation, with the necessary adaptations. Such certificates should be issued in an electronic format ▌ to last owners of end-of-life vehicles, and provided by the authorised treatment facilities ▌ to the relevant authorities of the Member State through an electronic notification procedure for the purpose of cancelling the registration of the vehicle. The electronic notification system should enable the transmission of the certificate of destruction and allow for a copy of the electronic notification to be provided to the last vehicle owner as well as to any economic operator acting on behalf of that owner.

Amendment 32

(66) Notwithstanding the obligation in Directive 2000/53/EC to transfer all end-of-life vehicles for treatment to an authorised treatment facility, there is a very significant share of vehicles whose whereabouts are unknown, and which might have been either illegally treated or exported as end-of-life vehicles, or whose status is not properly reported to the Member States registration authorities. Such vehicles are referred to as ‘missing vehicles’. Member States should strengthen their cooperation so as to reduce the number of missing vehicles. Recognition of certificates of destruction issued in another Member State and the obligation to inform the authorities of the Member States, where the vehicle is registered, that a certificate of destruction is issued, should allow for better tracking of end-of-life vehicles’ whereabouts.

Proposal for a regulation

(67) To ensure effective collection of end-of-life vehicles, explicit obligations should be addressed to vehicle owners. They should deliver their vehicle, when it reaches the endoflife phase, to collection points or authorised treatment facilities. When vehicles are damaged and insurance companies are involved in declaring them a technical or economic total loss, the insurance company or any other automotive expert acting on its behalf should also assess whether or not the vehicle is an end-of-life vehicle in accordance with this Regulation. In the case of abandoned vehicles, the relevant authorities should set out rules for declaring a vehicle as an end-of-life vehicle and proceed in accordance with this Regulation. Abandoned vehicles could include, for example, vehicles left unattended or illegally on public property, or vehicles that have been parked on private property without the consent of the owner of the property, or vehicles that have not been reclaimed after a notification by competent authorities to the vehicle owner.

Recital 29

▌

Amendment 33

(68) In order to ensure a uniform and environmentally sound treatment of end-of-life vehicles in the Union, it is essential to ensure that the authorised treatment facilities accept and treat all end-of-life vehicles, parts, components and materials, including waste parts from repairs of vehicles, in compliance with the conditions set out in their permits, as well as in accordance with the requirements set out in this Regulation, the best available techniques, and Directive 2010/75/EU of the European Parliament and of the Council. For the purposes of compliance with the removal requirements, the quality requirements and the material recovery targets, the complete treatment of an end-of-life vehicle can, but does not need to be, carried out by a single waste management operator or within a single installation.

Proposal for a regulation

(69) In view of the key role of authorised treatment facilities in managing end-of-life vehicles in a way that does not adversely affect the environment or human health and contributes to the achievement of circular economy objectives of the Union, it is necessary to lay down obligations applying to such facilities and covering all their activities, from acceptance and storage of an end-of-life vehicle until its final treatment.

Recital 31

(70) In order to ensure traceability of their activities, including quality of scrap or other relevant input materials, the authorised treatment facilities should document the treatment operations performed and electronically store the record thereof for a minimum of three years, and be able to present it, upon request, to relevant national authorities.

Amendment 34

(71) The depollution of an end-of-life vehicle is the first step towards preventing damage to the environment, human health and risks to work safety. It is therefore essential that an endoflife vehicle undergo the necessary depollution operations within 30 days following its delivery to the authorised treatment facility, before the end-of-life vehicle is treated any further. During that phase, waste oils should be collected and stored separately from the other fluids and liquids, and be further treated in accordance with Directive 2008/98/EC. Refrigerants should be treated in accordance with Regulation (EU) 2024/573 of the European Parliament and of the Council. In addition, the parts, components and materials containing lead, cadmium, mercury and hexavalent chromium should be removed from the end-of-life vehicle, to avoid adverse effects on humans or the environment.

Proposal for a regulation

(72) In order to ensure a proper implementation of Regulation (EU) 2023/1542, all batteries incorporated in vehicles are to be separately removed from an end-of-life vehicle and stored in a designated area for further treatment.

Recital 33

(73) In order to maximise the potential of reuse, remanufacturing and refurbishment of parts and components, and preserve a high value for the secondary materials which derive from end-of-life vehicles, certain parts and components should mandatorily be removed from an end-of-life vehicle prior to shredding. Those parts and components ▌ should be removed in a manual dismantling process, a semi-automated or automated disassembly process in a non-destructive way. It should be possible to deviate from the requirement on mandatory non-destructive removal of parts and components, when an authorised treatment facility demonstrates that the manual dismantling, semi-automated or automated disassembly in a non-destructive way entails disproportionate economic costs that cannot be compensated by the revenues expected from the reuse, remanufacturing or refurbishment of these parts and components. In such a case, it should be possible for these parts and components to be removed in a destructive way for the purposes of separation of relevant materials prior to shredding. Parts and components can be exempted entirely from mandatory removal, if they are designated as such in this Regulation, if the authorised treatment facility demonstrates that post-shredder technologies separate materials from the parts and components concerned as efficiently as manual, semi-automated or automated processes, and that the criteria and limit values of this Regulation are met. In order to take into account technical and scientific progress, the power to adopt acts in accordance with Article 290 TFEU should be delegated to the Commission in respect of amending the relevant Annex.

Amendment 35

(74) Once the authorised treatment facilities have removed parts and components from an endof-life vehicle, they should carefully assess and determine whether those parts and components are fit for reuse, remanufacturing or refurbishment, based on objective criteria linked to the technical features of the parts and components and the requirements of vehicle safety.

Proposal for a regulation

(75) Regulation (EU) 2023/1542 sets out rules on the sustainability, performance, safety, collection, recycling and second life of batteries as well as on removal information about batteries for economic operators. The potential for a second life of batteries should be taken into consideration in this Regulation by excluding the electric vehicle battery from the essential parts or components, so as to allow for handing over the vehicle for treatment, free of charge, without the electric vehicle battery, on condition that the last vehicle owner provides documentation which proves that the battery has been handled by a professional operator in accordance with Regulation (EU) 2023/1542.

Recital 33 a (new)

(76) Recognising the potential of remanufacturing and refurbishment in the automotive sector, and their contribution towards circular economy, it is necessary to provide legal clarity to the economic operators involved in this sector. It should therefore be clarified that parts and components removed from an end-of-life vehicle or from repair and maintenance operations, which are suitable for immediate reuse, or further remanufacturing or refurbishment by professional operators, should not be considered waste. In order to respect the waste hierarchy and to boost the circular use of spare parts, the transfer of these parts and components, excluding batteries, between economic operators should not be restricted. Parts and components removed from end-of-life vehicles should be properly checked, cleaned and, where necessary, tested by an authorised treatment facility so that they could be immediately reused without any other pre-processing, or in other cases be suitable for further remanufacturing or refurbishment. Parts and components not suitable for reuse, remanufacturing or refurbishment ▌ should ▌ be considered as waste and their export should be subject to Regulation (EU) 2024/1157 of the European Parliament and of the Council. The relevant national authorities should be in a position to request documentation from the authorised treatment facility that removed the part or component concerned, where that authorised treatment facility confirms, via a dedicated assessment, the technical suitability of the relevant parts and components for remanufacturing, refurbishment or reuse.

Amendment 36

(77) In its evaluation of Directive 2000/53/EC, the Commission found that used spare parts and components are offered to the public by unidentified providers and often come from illegal activities. Therefore, new requirements should be established concerning the trading of used, remanufactured or refurbished parts and components. Such parts and components should, above all, be marked with a label indicating the name of the component or part, and the contact information of the authorised treatment facility which removed the component or part, and be appropriately protected against damage during transportation, loading and unloading of the parts and components. The authorised treatment facility which removed the component or part should have available a copy of the invoice or contract related to the transfer of these parts, in the event that the competent authority requests such documentation.

Proposal for a regulation

(78) Where the end-user is a consumer, the business-to-consumer sale of used, remanufactured or refurbished parts and components would be covered by Directive (EU) 2019/771 of the European Parliament and of the Council. That Directive requires goods sold to be in conformity with the sales contract and stipulates the liability of the seller and consumers’ remedies in the event of lack of conformity, such as free repair or replacement of the goods. Since removed parts and components fit for reuse or refurbished parts and components constitute second-hand goods within the meaning of Directive (EU) 2019/771, the seller and the consumer can agree on a shorter liability or limitation period that is not less than one year if the Member State concerned has provided for such a possibility. The economic operators concerned are encouraged to provide commercial guarantees on the reused, remanufactured and refurbished parts and components to consumers and to their customers in business-to-business transactions.

Recital 35

(79) In the interests of road safety and protection of the environment, certain components and parts which have been removed from end-of-life vehicles should not be reused, remanufactured or refurbished. Such parts and components should not be used for the construction of new vehicles or in vehicles that have already been placed on the market, except where the conducted technical assessment demonstrates their conformity with applicable vehicle requirements. Those parts should only be installed by a qualified repair and maintenance operator.

Amendment 37

(80) In order to encourage the development and proper functioning of the market for reusable, refurbished and remanufactured parts and components and retrofitting of vehicles in the Union, Member States should be encouraged to incentivise at national level the reuse, refurbishment, and remanufacturing of parts and components, whether they are removed during the use or at the end-of-life phase of a vehicle, as well as the retrofitting of vehicles. Those incentives should be reflected in the waste prevention programmes which Member States are required to establish pursuant to Article 29 of Directive 2008/98/EC. The Commission should facilitate the exchange of information among Member States by sharing their best practices on the incentives taken at national level, with a view to monitoring their effectiveness.

Proposal for a regulation

(81) In its evaluation of Directive 2000/53/EC, the Commission found that the definition of recycling in that Directive is too broad and not consistent with Directive 2008/98/EC, as it considers ‘backfilling’ to be a recycling operation. Therefore, this Regulation should align the definition of recycling with Directive 2008/98/EC by excluding backfilling from its scope.

Recital 36

(82) The recycling of all plastics from end-of-life vehicles should be continuously improved, and it is important to ensure a sufficient supply of recyclates to meet the demand for recycled plastics in vehicles. It is therefore necessary to lay down a specific recycling target of 30 % of plastics from end-of-life vehicles. This target would be complementary to the reuse and recycling target of 85 % and the reuse and recovery target of 95 % of end-of-life vehicles by average weight per vehicle and year. To facilitate the implementation of those requirements by waste management operators, a transitional period of three years is needed. In the meantime, the current target for the reuse and recycling of 85 % as well as reuse and recovery target of 95 % of end-of-life vehicles, as established by Directive 2000/53/EC and based on the definition of recycling in that Directive, should continue to apply. The weight of the plastic recycled and the total weight of plastics for the specific recycling target of plastics should exclude elastomers, thermosets other than polyurethane foams used for cushioning and plastics that contain or are contaminated by any substance referred to in Article 7 of Regulation (EU) 2019/1021 when the thresholds of Annex IV to that Regulation are exceeded.

Amendment 38

(83) It is important to increase the recovery of high-quality secondary materials by improving the shredding processes of end-of-life vehicles. Therefore, end-of-life vehicles, their parts, components and materials should be allowed to be processed in a shredder in combination with other waste, including packaging waste and waste electrical and electronic equipment, only if specific criteria and the quality requirements for output fractions are fulfilled.

Proposal for a regulation

(84) To further increase the quality of treatment of end-of-life vehicles, it should only be possible to landfill waste fractions resulting from shredded end-of-life vehicles, where the fractions which contain noninert waste do not exceed the limit values set out in this Regulation.

Recital 37

(85) End-of-life vehicles are classified as hazardous waste and cannot be exported to nonOECD countries. It should still be possible for depolluted end-of-life vehicles to be treated outside the Union, provided that those depolluted end-of-life vehicles are shipped in compliance with Regulation (EU) 2024/1157.

Amendment 39

(86) Where an end-of-life vehicle is shipped from the Union to a third country, the exporter should provide documentary evidence approved by the competent authority in the destination country confirming that the treatment conditions are broadly equivalent to the requirements of this Regulation, and to environmental and human health protection requirements laid down in other Union legislation, in line with Regulation (EU) 2024/1157.

Proposal for a regulation

(87) In order to ensure that end-of-life vehicles are treated in an environmentally sustainable manner, it is important to establish clarity on a vehicle’s status throughout its entire life, particularly in situations when there is a need for distinguishing used vehicles from endoflife vehicles. A vehicle owner that intends to transfer the ownership of a used vehicle within the Union should in certain circumstances be required to present documentation that the vehicle is not an end-of-life vehicle. That documentation should demonstrate that the vehicle is roadworthy or provide an assessment in accordance with this Regulation, which contains criteria for determining whether a vehicle ▌ is an end-of-life vehicle▌. That assessment should be carried out in a cascading manner, from binding criteria to indicative criteria. As soon as one binding criterion is met, the vehicle concerned should be considered an end-of-life vehicle. If no binding criteria is met, the indicative criteria should be checked. If one of those indicative criteria apply, a further technical assessment would be necessary to determine the repairs needed to obtain a roadworthiness certificate. Based on that technical assessment, the vehicle owner should have the possibility to decide whether the vehicle should be discarded. If, within five years following that technical assessment, the vehicle owner does not obtain a roadworthiness certificate, the vehicle concerned should be considered an endoflife vehicle. For the period of those five years, the technical assessment should constitute documentation that the vehicle is not an end-of-life vehicle. The end-of-life assessment should be carried out by an independent automotive expert, but it would be up to each Member State to decide how exactly such independent automotive experts should be appointed. The independent automotive experts should be professionals with specialised knowledge in the field of automotive technology, repair and maintenance or vehicle value assessment, appointed to provide unbiased expertise, without conflicting interests with the parties involved. To avoid excessive burdens for natural persons who are not economic operators and to target primarily the situation of a majority of potential end-of-life vehicles, the documentation requirement should only apply to such vehicle owners in specified circumstances. Such cases should concern the sales of vehicles that were declared to be an economic total loss by an insurance company or where the sale is concluded entirely by means of an online platform, without a physical handover of the vehicle between the seller and buyer or any person acting on their behalf.

Recital 39

(88) It is necessary to ensure that where an insurance company or any automotive expert acting on its behalf carries out an assessment of damage to a vehicle involved in an accident, such an assessment should, in particular, involve a verification of whether the vehicle qualifies as an endoflife vehicle, in accordance with the criteria laid down in this Regulation. In order to tackle illegal activities and ensure the proper identification of endof-life vehicles, the competent authorities of Member States should be empowered, in case of doubt as to the status of a used vehicle, to request documentation from the vehicle owner to confirm that the vehicle is not an end-of-life vehicle. Such documentation should be either an end-of-life assessment conducted in accordance with this Regulation or a valid roadworthiness certificate. Competent authorities can make use of this prerogative irrespective of whether the vehicle has been involved in an accident or not. This empowerment is also applicable to special purpose vehicles, which otherwise should not be subject to the rules governing the status of vehicles. Member States should be able to exempt vehicles of L1e, L2e, and L6e-category from the rules on status of the vehicle in national legislation. The power to adopt acts under Article 290 TFEU should be delegated to the Commission to amend the criteria in this Regulation for determining whether a vehicle is an end-of-life vehicle by removing criteria according to which a vehicle is considered an end-of-life vehicle where technological advancements in the areas of traceability, repairability and safety provide sufficient justification for such a deletion.

Amendment 40

(89) In order to ensure that the internal market is not undermined and given that the export of used vehicles raises important environmental and public health challenges as documented by the UN Environmental Programme, it is appropriate to lay down specific requirements regarding the export of used vehicles. Such requirements should be based on objective criteria according to which a used vehicle is not an end-of-life vehicle and is to be roadworthy pursuant to Directive 2014/45/EU of the European Parliament and of the Council. This should ensure that only used vehicles which are suitable to be driven on the Union roads can be exported to a third country ▌. To allow customs authorities to verify that those requirements are met upon export, any person exporting a used vehicle should be required to provide those authorities with the Vehicle Identification Number (VIN) and a statement confirming that the used vehicle is not an end-of-life vehicle and that it is considered roadworthy.

Proposal for a regulation

(90) It is important to establish a mechanism where the compliance of used vehicles with the export requirements can be effectively verified without impeding the trade between the Union and third countries. An electronic system should therefore be established by the Commission, enabling authorities in the Member States to exchange and verify information in real time on the VIN and the roadworthiness status of used vehicles to be exported. In view of its existing features and functionalities linked to the sharing, between vehicle registration authorities, of information relating to vehicles registered in the Union, the MOVE-HUB, a message exchange platform, has been developed by the Commission for the exchange of messages to interconnect Member State national electronic registers. Member States should be able to use the European Car and Driving Licence Information System (EUCARIS) to connect to the MOVE-HUB electronic system. The platform currently facilitates the interconnection of all of the following: road transport undertaking registers (ERRU), the driving licence registers (RESPER), the professional driver training registers (ProDriveNet), the notification of vehicle roadside inspection failures (RSI) and the tachograph driver card registers (TACHOnet). Therefore, the functionalities of the MOVE-Hub should be further extended to enable the exchange and verification of information on the VIN and the roadworthiness status of used vehicles to be exported. To allow customs authorities to verify electronically and automatically whether a used vehicle to be exported complies with the export requirements, the electronic system operated by MOVE-HUB should be interconnected to the EU Single Window Environment for Customs, in accordance with Regulation (EU) 2022/2399 of the European Parliament and of the Council. That Regulation provides for a comprehensive framework of automated controls, which apply to a specific Union non-customs formality. Therefore, this Regulation should set out the main elements which are to be controlled, while the technical measures of the implementation of this control would be laid down under Regulation (EU) 2022/2399.

Recital 42

(91) In order to ensure uniform conditions for the implementation of export requirements, implementing powers should be conferred on the Commission to develop the necessary electronic systems and make them operational with national systems.

Amendment 41

(92) Competent authorities of Member States should collaborate with one another to ensure an effective implementation of the requirements governing the export of used vehicles and to provide mutual assistance. This assistance should include information exchange to verify the status of vehicles prior to their export, including confirming registration information in the Member State where they were previously registered. Cooperation should entail, inter alia, providing access to relevant documents and information, including inspection findings, while adhering to applicable data protection law governing the requested authority. Furthermore, in pursuit of comprehensive cooperation, competent authorities of Member States should cooperate with authorities from third countries.

Proposal for a regulation

(93) It is important that customs authorities are able to carry out controls on used vehicles to be exported in accordance with Regulation (EU) No 952/2013 of the European Parliament and of the Council. A significant share of used vehicles leaving the Union are destined to countries where import requirements are established or could be established, such as requirements in relation to the age of the vehicle or to its emissions. It is important that customs authorities are able to verify electronically and automatically, via the EU Single Window Environment for Customs, whether a used vehicle to be exported complies with those requirements, when the information on these requirements is officially notified to the Commission by the third countries concerned. To facilitate compliance, the Commission should publish and update on a dedicated online portal the notified specific conditions linked to the protection of the environment or road safety imposed by third countries. In order to protect the environment and road safety in third countries, the power to adopt delegated acts in accordance Article 290 TFEU should be delegated to the Commission in respect of setting those requirements.

Recital 44

(94) To prevent the risk of vehicles being exported without the required documents indicating the VIN and the roadworthiness of the vehicle, and of non-compliance with export requirements being detected only when the vehicle has already left the Union, the application of the procedures of entry in the declarant’s records and of the self-assessment set out in Regulation (EU) No 952/2013 should not be allowed. Those procedures would prevent customs authorities from conducting real-time controls through the EU Single Window Environment for Customs, which would increase the risk of breaching the Union rules on the export of used vehicles.

Amendment 42

(95) In its evaluation of Directive 2000/53/EC, the Commission considered the lack of requirements on mandatory inspections as a shortcoming of that Directive. Therefore, this Regulation should impose on Member States certain obligations related to detecting illegal activities in the area of collection, treatment and export of end-of-life vehicles and their parts and components, as well as set out minimum requirements concerning the frequency of inspections, their scope and characteristics of facilities subject to such inspections. The competitiveness of the authorised treatment facilities in relation to the illegal operators would thus be safeguarded and a continued compliance with conditions of permits and requirements on the collection and treatment of end-of-life vehicles would be ensured.

Proposal for a regulation

(96) In order to ensure the effective enforcement of this Regulation, it is necessary that Member States establish inspection strategies designed to detect illegal activities in the collection, treatment and export of endoflife vehicles, as well as their parts and components. Such strategies should provide for the actions set out in this Regulation to safeguard compliance and contribute to the prevention of unlawful practices in the sector. Member States should carry out inspections ▌each calendar year. Such inspections should cover both legally operating entities and suspected illegal activities. The minimum number of inspections to be conducted annually in each Member State should correspond to no less than 10 % of authorised treatment facilities and collection points operating within that Member State. It needs to be emphasised that inspections carried out under this Regulation should be complementary to inspections on the shipment of end-of-life vehicles, which are comprehensively regulated in Regulation (EU) 2024/1157.

Recital 46

(97) Member States should establish cooperation mechanisms at national and international level so that inspections can take place in an efficient manner with the objective of facilitating the prevention and detection of illegal treatment and export of end-of-life vehicles and addressing the issue of missing vehicles. Such mechanisms should allow for the exchange of vehicle registration data, necessary for tracking the vehicles and checking if they have been properly treated when they reach the end-of-life phase. In order to foster cooperation across the Union on those topics, the Commission and Member States should actively use relevant existing agencies, such as the European Union Agency for Law Enforcement Cooperation (Europol), established by Regulation (EU) 2016/794 of the European Parliament and of the Council, as well as enforcement networks dedicated to address environmental crime across the Union.

Amendment 43

(98) All necessary enforcement measures should be taken by the Member States to tackle illegal treatment of end-of-life vehicles, in order to prevent damages to the environment or human health due to such activities. Any establishment or undertaking treating end-of-life vehicles without a valid permit, or in breach of conditions or requirements set out in the permit, should therefore be subject to penalties. Also other measures, such as withdrawing the permit or suspending the operations of an operator, should be considered by Member States to ensure effective compliance with this Regulation.

Proposal for a regulation

(99) Member States should lay down rules on penalties applicable to infringements of this Regulation and ensure that those rules are implemented. The penalties should be established in particular for violations of the provisions on export of used vehicles, on delivery of end-of-life vehicles to authorised treatment facilities or collection points and on trading used, remanufactured or refurbished parts and components. The penalties provided for should be effective, proportionate and dissuasive.

Recital 47

(100) Establishing reporting obligations is necessary to ensure proper implementation, monitoring and evaluation of Union legislation and to provide markets with up-to-date transparency information. Correct and valid data is indispensable for the Commission to assess whether the measures provided for in this Regulation function properly and to propose, where necessary, further adjustments aimed at ensuring environmentally sound treatment of end-of-life vehicles or at streamlining the implementation of this Regulation. With a view to limiting the burden linked to reporting, only data which are indispensable for the purposes of the implementation of this Regulation should be reported, and reporting should be facilitated through digital tools. Based on those elements, it should be specified which data is to be reported by economic operators to the relevant authorities and by Member States to the Commission. In order to ensure uniform conditions for the implementation of reporting requirements, implementing powers should be conferred on the Commission. The implementing acts, which should replace Commission Decision 2005/293/EC, should also lay down a methodology for calculating and verifying whether the reuse, recycling and recovery targets have been attained.

Amendment 44

(101) The competent authorities of the Member States play an important role in verifying compliance with the obligations established under this Regulation relating to the collection and management of end-of-life vehicles, including better tracking by those authorities of the vehicles’ whereabouts and combating illegal handling of end-of-life vehicles. Member States should thus require that waste management operators and other relevant economic operators provide the competent authorities with data allowing them to better monitor how the provisions on collection and management of end-of-life vehicles are being implemented.

Proposal for a regulation

(102) In order to ensure uniform conditions for the implementation of this Regulation, implementing powers should be conferred on the Commission. Those implementing powers should be exercised in accordance with Regulation (EU) No 182/2011 of the European Parliament and of the Council.

Recital 48

(103) When adopting delegated acts under this Regulation, it is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert level, and that those consultations be conducted in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making. In particular, to ensure equal participation in the preparation of delegated acts, the European Parliament and the Council receive all documents at the same time as Member States’ experts, and their experts systematically have access to meetings of Commission expert groups dealing with the preparation of delegated acts.

Amendment 45

(104) Annex II to Regulation (EU) 2019/1020 of the European Parliament and of the Council, which lists Union harmonisation legislation without provisions on penalties, should be amended to delete Directives 2000/53/EC and 2005/64/EC from that list as it is necessary that the current Regulation contains penalty provisions.

Proposal for a regulation

(105) It is necessary to ensure that the type-approval related provisions and requirements of this Regulation are verified during the EU type-approval process. Regulation (EU) 2018/858 should therefore be amended accordingly.

Recital 49 a (new)

(106) Missing vehicles have been recognised as one of the major implementation challenges of Directive 2000/53/EC. The absence of an efficient system allowing for real time exchange of information between Member States on the registration status of vehicles hinders traceability and has been identified as a reason for the high number of ‘missing vehicles’ in the Union. To address this, the Commission proposed a revision of Council Directive 1999/37/EC on the registration documents for vehicles. That revision should require Member States to record electronically, for vehicles registered on their territory, data allowing to properly document the reasons for the cancellation of a registration of a vehicle, especially if a vehicle has been treated as an end-of-life vehicle in an authorised treatment facility, re-registered in another Member State, exported to a third country outside the Union or stolen. Moreover, to prevent the illegal dismantling or export of vehicles that have been temporarily de-registered, the vehicle owners should be obliged to promptly report any changes in their ownership to the national vehicle registration authority. Those amendments complement and build on the existing requirements for Member States to electronically record data on all vehicles registered on their territory.

Amendment 46

(107) In view of the need to ensure a high level of environmental protection and to take scientific progress into account, the Commission should submit to the European Parliament and to the Council a report on the application of this Regulation and its impact on the functioning of the single market and on the environment. The Commission should include ▌ in its report, inter alia, an evaluation of the provisions on the design of new vehicles, including the targets for re-usability, recyclability and recoverability, on the management of end-of-life vehicles, including the recycling targets, and on penalties as well as an assessment of the need and feasibility of further extending the scope of the provisions applicable to L-category vehicles, heavy-duty vehicles, vehicles that are type-approved in multi-stage type-approval and to motor caravans, and including trailer caravans within the scope of this Regulation. That evaluation should focus not only on aspects concerning treatment of end-of-life vehicles, but also on the relevance and added-value of laying down design requirements and evaluate the extent to which the issue of missing vehicles has been solved, including estimates on the number of missing vehicles and the impact of the measures regarding the export of used vehicles, and the need to include further measures addressing the issue of the traceability of vehicles. In that respect, that evaluation should review the effectiveness, interoperability and reliability of national vehicle registration systems and their crossborder exchange of information in ensuring the accurate identification, status and traceability of vehicles throughout their lifecycle. The Commission should also review the state of technological development and environmental performance of biobased plastic content in vehicles and of elastomers derived from the reprocessing of tyres in new vehicles and could present a legislative proposal to lay down relevant targets, where appropriate. For elastomers derived from the reprocessing of tyres, priority should be given to assessing the extent to which they can be integrated into the existing targets for recycled plastic content.

Proposal for a regulation

(108) The report from the Commission should also include an evaluation of the measures concerning the provision of information on substances of concern present in vehicles and whether the traceability of such substances need to be improved. It should also evaluate whether there is a need to introduce measures addressing the substances that can affect the treatment of vehicles when they reach the end-of-life phase, in order to align it more closely with Regulation (EU) 2024/1781.

Recital 51

(109) The Commission should also evaluate, based on the declarations made by manufacturers, whether manufacturers are on track to comply with the recycled plastic targets. The assessment should particularly evaluate the availability of suitable plastic recycling technologies, the sufficient availability of recycled plastic, the level of quality of recycled plastic compared to the level of safety required and the technical and economic difficulties to reach the target. Where appropriate, the assessment should be accompanied by a legislative proposal from the Commission to amend the relevant provisions of this Regulation.

Amendment 47

(110) It is necessary to provide for sufficient time for economic operators to comply with their obligations under this Regulation, and for Member States to set up the administrative infrastructure necessary for its application. The application of this Regulation should therefore be deferred.

Proposal for a regulation

(111) In order to allow Member States to take the necessary administrative measures regarding establishment of collection systems, while keeping continuity for economic operators and waste management operators, the repeal of Directive 2000/53/EC should be deferred.

Recital 52

(112) This Regulation does not change the rules on restrictions on the use of lead, mercury, cadmium and hexavalent chromium in vehicles established under Directive 2000/53/EC or the exemptions from those restrictions. However, it lays down clearer rules on how compliance with those restrictions, as well as with other circularity requirements, are to be verified during the type-approval process. In order to ensure that manufacturers have sufficient time to comply with those rules, their application should be deferred. Therefore, provisions of Directive 2000/53/EC concerning restrictions on the use of lead, mercury, cadmium and hexavalent chromium should remain in force until the rules in this Regulation become applicable, in order to ensure continuity and to assure that vehicles placed on Union’s market do not contain such substances, in cases other than provided for in that Directive.

Amendment 48

(113) This Regulation also provides clearer provisions on extended producer responsibility than those laid down in Directive 2000/53/EC. As the establishment of such schemes and the necessary national provisions on authorisation of producers and producer responsibility organisations requires some time, the application of those provisions should be deferred. The corresponding provisions of Directive 2000/53/EC should remain in force until the provisions in this Regulation become applicable in order to ensure continuity with regard to the producers financing the costs of collecting end-of-life vehicles.

Proposal for a regulation

(114) This Regulation contains new requirements on the treatment of end-of-life vehicles, in particular on the removal of parts and components for the purpose of promoting their reuse, remanufacturing or refurbishment as well as increasing the quality of recycling processes. Waste management operators require time to adjust to those new requirements and their application should therefore be deferred. The corresponding provisions of Directive 2000/53/EC should remain in force until the requirements in this Regulation become applicable in order to ensure continuity with regard to treatment of end-of-life vehicles.

Recital 53

(115) In order to ensure continuity, the obligations under Directive 2000/53/EC on reporting and the related obligations for the transmission of data to the Commission should remain in force until the new calculation rules and reporting formats are adopted by the Commission under this Regulation.

Amendment 49

(116) The application of all provisions concerning L-category vehicles ▌and vehicles of categories M2, M3, N2, N3 and O should be deferred in order to provide sufficient time for operators to comply with the new requirements. This is particularly important with respect to permits for authorised treatment facilities that are capable of conducting depollution and further treatment of such vehicles.

Proposal for a regulation

(117) In the interest of clarity, rationality and simplification, since the rules on type-approval of motor vehicles with regard to their reusability, recyclability and recoverability are all contained in this Regulation, the repeal of Directive 2005/64/EC should be deferred. This provides sufficient time for manufacturers to ensure that the vehicle types they design and construct comply with the circularity requirements and for type-approval authorities to implement the new rules.

Recital 54

(118) Since the objectives of this Regulation, namely to contribute to the functioning of the single market, to prevent and reduce the adverse impacts from management of end-of-life vehicles and to ensure a high level of protection of the environment and human health, cannot be sufficiently achieved by the Member States but can rather, by reason of the need for harmonisation, be better achieved at Union level, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union. In accordance with the principle of proportionality, as set out in that Article, this Regulation does not go beyond what is necessary in order to achieve those objectives.

Amendment 50

(119) On 1 February 2020, the United Kingdom withdrew from the European Union. The Withdrawal Agreement was concluded between the European Union and the European Atomic Energy Community, on the one part, and the United Kingdom, on the other. It was approved by Council Decision (EU) 2020/135 and entered into force on 1 February 2020. The Withdrawal Agreement provides for a transition period which ended on 31 December 2020. At the end of the transition period, Union law ceased to apply to the United Kingdom, whilst the Protocol on Ireland / Northern Ireland (the ‘Windsor Framework’), which forms an integral part of the Withdrawal Agreement, became applicable. In accordance with Article 5(4) of the Windsor Framework and point 9 of Annex 2 to the Windsor Framework, Directive 2005/64/EC, as well as legal acts of the Union implementing, amending or replacing that Directive, apply to and in the United Kingdom in respect of Northern Ireland. This Regulation replaces Directive 2005/64/EC and would therefore apply to and in the United Kingdom in respect of Northern Ireland. Considering the scope of the Windsor Framework, it is therefore appropriate to stipulate that certain provisions of this Regulation should not apply to and in the United Kingdom in respect of Northern Ireland,

Proposal for a regulation

HAVE ADOPTED THIS REGULATION:

Recital 55

Chapter I General provisions

Amendment 51

Article 1 Subject matter

Proposal for a regulation

This Regulation lays down circularity requirements on vehicle design and production related to reusability, recyclability and recoverability and the use of recycled content, which are to be verified at type-approval of vehicles, and on information and labelling requirements on parts, components and materials in vehicles. It also lays down requirements on extended producer responsibility, collection and treatment of end-of-life vehicles, as well as on the export of used vehicles from the Union to third countries.

Recital 57

Article 2 Scope

Amendment 52

1. This Regulation shall apply:

Proposal for a regulation

(a) to vehicles and end-of-life vehicles of categories M1 and N1 as referred to in Article 4(1), points (a)(i) and (b)(i), of Regulation (EU) 2018/858;

Recital 58

(b) from … [the first day of the month following 36 months from the date of entry into force of this Regulation], to special purpose vehicles and end-of-life special purpose vehicles, as defined in Article 3, point (31), of Regulation (EU) 2018/858, of categories M1 and N1;

Amendment 53

(c) from … [the first day of the month following 60 months from the date of entry into force of this Regulation] to vehicles and end-of-life vehicles of categories M2, M3, N2, N3 and O as referred to in Article 4(1) of Regulation (EU) 2018/858;

Proposal for a regulation

(d) from … [ the first day of the month following 60 months from the date of entry into force of this Regulation], to special purpose vehicles and end-of-life special purpose vehicles ▌ , as defined in Article 3, point (31), of Regulation (EU) 2018/858, of categories M2, M3, N2, N3 and O;

Recital 61

(e) from … [the first day of the month following 60 months from the date of entry into force of this Regulation] to vehicles and endoflife vehicles of L-category, as referred to in Article 4(2) of Regulation (EU) No 168/2013 of the European Parliament and of the Council.

Amendment 54

2. Notwithstanding paragraph 1, this Regulation shall not apply to:

Proposal for a regulation

▌

Recital 63

(a) vehicles produced in small series, as defined in Article 3, point (30), of Regulation (EU) 2018/858;

Amendment 55

(b) L-category vehicles produced in small series as referred to in Article 42 of Regulation (EU) No 168/2013;

Proposal for a regulation

(c) vehicles designed and constructed or adapted for use by the armed services only, as referred to in Article 2(2), point (d), of Regulation (EU) 2018/858;

Recital 64

(d) vehicles designed and constructed for use by the armed services, civil defence, fire services, forces responsible for maintaining public order and emergency medical services, as referred to in Article 2(2), point (e), of Regulation (EU) No 168/2013;

Amendment 56

▌

Proposal for a regulation

(e) vehicles of historical interest as defined in Article 3, point (7), of Directive 2014/45/EU, including their identifiable parts and components required for their maintenance activities and necessary to preserve their historical status for the period during which these vehicles are considered to be vehicles of historical interest;

Recital 66

(f) vehicles of special cultural interest for the period during which these vehicles are officially recognised as such by competent authorities and in accordance with the procedure set out in Annex II to this Regulation;

Amendment 57

▌

Proposal for a regulation

(g) trailer caravans as referred to in point 5.6 of Annex I to Regulation (EU) 2018/858;

Recital 67

(h) special purpose vehicles as defined in Article 3, point (31), of Regulation (EU) 2018/858 of categories M2, M3, N2, N3 or O that are produced by a small-volume manufacturer;

Amendment 58

(i) cycles designed to pedal of L1e-A-category, as referred to in criterium (9) of Annex I to Regulation (EU) No 168/2013, or L1e-B, as referred to in point 1.1.2. of Annex XIX to Commission Delegated Regulation (EU) No 3/2014.

Proposal for a regulation

3. Notwithstanding paragraph 1, point (c), the following provisions shall not apply to vehicles and end-of-life vehicles of categories M2, M3, N2, N3 and O:

Recital 68

(a) Article 4 on reusability, recyclability and recoverability of vehicles;

Amendment 59

(b) Article 5 on requirements for substances in vehicles;

Proposal for a regulation

(c) Article 6 on minimum recycled content in vehicles;

Recital 68 a (new)

▌

Amendment 60

(d) Article 8 on general obligations;

Proposal for a regulation

(e) Article 9 on circularity strategy;

Recital 69

(f) Article 10 on declaration on recycled content present in vehicles;

Amendment 61

(g) Article 12 on labelling of parts, components and materials present in vehicles;

Proposal for a regulation

(h) Article 13 on Digital Circularity Vehicle Passport;

Recital 70

(i) Article 21 on fee modulation;

Amendment 62

(j) Article 22 on cost allocation mechanism for vehicles becoming end-of-life vehicles in another Member State;

Proposal for a regulation

▌

Recital 73

(k) Article 33 on reuse, recycling and recovery targets;

Amendment 63

(l) Article 35(2) on shipments of end-of-life vehicles.

Proposal for a regulation

▌

Recital 76

4. Notwithstanding paragraph 1, point (e), the following provisions shall not apply to L-category vehicles or end-of-life vehicles▌:

Amendment 64

▌

Proposal for a regulation

(a) Article 4 on reusability, recyclability and recoverability of vehicles;

Recital 77

(b) Article 5 on requirements for substances in vehicles;

Amendment 65

(c) Article 6 on minimum recycled content in vehicles;

Proposal for a regulation

(d) Article 9 on circularity strategy;

Recital 86

(e) Article 10 on declaration on recycled content present in vehicles;

Amendment 66

(f) Article 13 on Digital Circularity Vehicle Passport;

Proposal for a regulation

(g) Article 21 on fee modulation;

Recital 87

(h) Article 22 on cost allocation mechanism for vehicles becoming end-of-life vehicles in another Member State;

Amendment 67

▌

Proposal for a regulation

(i) Article 33 on reuse, recycling and recovery targets;

Recital 88

▌

Amendment 68

(j) Article 35(2) on shipments of end-of-life vehicles;

Proposal for a regulation

(k) Article 38 on competent authority for export of used vehicles to third countries;

Recital 88 a (new)

(l) Article 39 on controls and requirements on the export of used vehicles;

Amendment 69

(m) Article 40 on automated verification of the information on vehicle status;

Proposal for a regulation

(n) Article 41 on risk management and customs controls;

Recital 95

(o) Article 42 on suspension;

Amendment 70

(p) Article 43 on release for export;

Proposal for a regulation

(q) Article 44 on refusal to release for export;

Article 2 – paragraph 1 – point c

(r) Article 45 on cooperation among authorities and exchange of information;

Amendment 71

(s) Article 46 on electronic systems.

Proposal for a regulation

▌

Article 2 – paragraph 2 – point c a (new)

5. Notwithstanding paragraph 1, points (b) and (d), the following provisions shall not apply to special purpose vehicles or end-of-life special purpose vehicles:

Amendment 72

(a) Article 4 on reusability, recyclability and recoverability of vehicles;

Proposal for a regulation

(b) Article 6 on minimum recycled content in vehicles;

Article 2 – paragraph 2 – point c b (new)

(c) Article 7 on design to enable removal and replacement of certain parts and components in vehicles;

Amendment 73

(d) Article 8 on general obligations;

Proposal for a regulation

(e) Article 9 on circularity strategy;

Article 2 – paragraph 2 – point c c (new)

(f) Article 10 on declaration on recycled content present in vehicles;

Amendment 74

(g) Article 11 on information on removal and replacement of parts, components and materials present in vehicles;

Proposal for a regulation

(h) Article 12 on labelling of parts, components and materials present in vehicles;

Article 2 – paragraph 2 – point c d (new)

(i) Article 13 on Digital Circularity Vehicle Passport;

Amendment 75

(j) Article 14 on competent authority for management of end-of-life vehicles;

Proposal for a regulation

(k) Article 15 on authorised treatment facilities;

Article 2 – paragraph 2 – point c e (new)

(l) Article 17 on Producer Responsibility Organisations;

Amendment 76

(m) Article 18 on authorisation on fulfilment of extended producer responsibility;

Proposal for a regulation

(n) Article 19 on registration;

Article 2 – paragraph 2 – point d

(o) Article 21 on fee modulation;

Amendment 77

(p) Article 22 on cost allocation mechanism for vehicles becoming end-of-life vehicles in another Member State;

Proposal for a regulation

(q) Article 33 on reuse, recycling and recovery targets;

Article 2 – paragraph 2 – point d a (new)

(r) Article 35(2) on shipments of end-of-life vehicles;

Amendment 78

(s) Article 36 on transfer of ownership of used vehicles within the Union;

Proposal for a regulation

(t) Article 37(1) on status of the vehicle;

Article 2 – paragraph 4 – introductory part

(u) Article 38 on competent authority for export of used vehicles to third countries;

Amendment 79

(v) Article 39 on controls and requirements on the export of used vehicles;

Proposal for a regulation

(w) Article 40 on automated verification of the information on vehicle status;

Article 2 – paragraph 4 – point a

(x) Article 41 on risk management and customs controls;

Amendment 80

(y) Article 42 on suspension;

Proposal for a regulation

(z) Article 43 on release for export;

Article 2 – paragraph 4 – point a

(aa) Article 44 on refusal to release for export;

Amendment 81

(ab) Article 45 on cooperation among authorities and exchange of information;

Proposal for a regulation

(ac) Article 46 on electronic systems.

Article 2 – paragraph 4 – point a a (new)

6. Notwithstanding paragraph 1, ▌ the following shall apply:

Amendment 82

(a) Articles 4 to 13 shall not apply to parts of a vehicle that have been typeapproved in a multi-stage type-approval of category M2, M3, N2, N3 or O other than the base vehicle; the other provisions of this Regulation apply to the extent that they apply to the category of the vehicle concerned;

Proposal for a regulation

(b) Article 5 shall not apply to special purpose vehicles of categories M2, M3, N2, N3 or O;

Article 2 – paragraph 4 – point a b (new)

(c) ▌ Articles 7 and 11 shall apply to L-category vehicles only with respect to entries 1, 2, 3, 4, 5, 7, 10 and 11 of Part C of Annex VIII ;

Amendment 83

(d) ▌ Article 7 shall apply to vehicles of categories M2, M3, N2, N3 and O only with respect to entries 1, 3, 4 and 5 of Part C of Annex VIII;

Proposal for a regulation

(e) ▌ Article 8 shall apply to L-category vehicles only with respect to the obligations applicable for such vehicles;

Article 2 – paragraph 4 – point a c (new)

(f) Article 16, point (b), shall not apply to L-category vehicles and vehicles of categories M2, M3, N2, N3, or O and special purpose vehicles of categories M1, M2, M3, N1, N2, N3, or O ;

Amendment 84

(g) Member States may exempt L1e, L2e and L6e-category vehicles from the obligations under Article 23(6) and Articles 25, 36 and 37;

Proposal for a regulation

▌

Article 2 – paragraph 4 – point a d (new)

(h) for L-category vehicles and vehicles of categories M2, M3, N2, N3, and O and for special purpose vehicles of categories M2, M3, N2, N3 and O, Article 29 shall only apply with respect to entries 1, 2, 3, 4, 5, 7, 10 and 11 of Part C of Annex VIII ;

Amendment 85

(i) for L-category vehicles and for vehicles of categories M2, M3, N2, N3 and O, Articles 47 to 50 shall only apply with respect to reporting and enforcement of obligations applicable for such vehicle categories.

Proposal for a regulation

▌

Article 2 – paragraph 4 – point a e (new)

Article 3 Definitions

Amendment 86

For the purposes of this Regulation, the following definitions shall apply:

Proposal for a regulation

(1) ‘vehicle’ means any vehicle as defined in Article 3, point (15), of Regulation (EU) 2018/858 or listed in Article 4(2) ▌ of Regulation (EU) No 168/2013;

Article 2 – paragraph 4 – point a f (new)

(2) ‘end-of-life vehicle’ means a vehicle which is waste as defined in Article 3, point (1), of Directive 2008/98/EC, or which is waste according to ▌ Annex I of this Regulation;

Amendment 87

(3) ‘vehicle type’ means any type of vehicle as defined in Article 3, point (32), of Regulation (EU) 2018/858 or vehicle type as defined in Article 3, point (73), of Regulation (EU) No 168/2013;

Proposal for a regulation

(4) ‘reuse’ means any operation by which parts or components of end-of-life vehicles are used again for the same purpose for which they were conceived;

Article 2 – paragraph 4 – point a g (new)

(5) ‘reusability’ means the possibility for reuse of parts or components diverted from an end-of-life vehicle;

Amendment 88

(6) ‘recyclability’ means the possibility for recycling of parts, components or materials diverted from an end-of-life vehicle;

Proposal for a regulation

(7) ‘recoverability’ means the possibility for recovery of parts, components or materials diverted from an end-of-life vehicle;

Article 2 – paragraph 4 – point a h (new)

▌

Amendment 89

(8) ‘supplier’ means any natural or legal person who supplies parts, components or materials to a manufacturer who uses them to manufacture vehicles;

Proposal for a regulation

(9) ‘plastic’ means a polymer within the meaning of Article 3, point (5), of Regulation (EC) No 1907/2006, to which additives or other substances may have been added and which can function as a main structural component of final products, with the exception of natural polymers that have not been chemically modified;

Article 2 – paragraph 4 – point a i (new)

▌

Amendment 90

(10) ‘critical raw materials’ means critical raw materials within the meaning of Article 4(1) of Regulation (EU) 2024/1252;

Proposal for a regulation

(11) ‘pre-consumer waste’ means material diverted from the waste stream during a manufacturing process, excluding reutilisation of materials such as rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it;

Article 2 – paragraph 4 – point a j (new)

(12) ‘post-consumer waste’ means waste that is generated from products that have been placed on the market or supplied for distribution, consumption or use in a third country in the course of a commercial activity, whether in return for payment or free of charge;

Amendment 91

▌

Proposal for a regulation

(13) ‘removal’ means manual, mechanical, chemical, thermal or metallurgic handling with the result that the targeted parts, components or materials from end-of-life vehicles are individually identifiable as a separate output stream or part of an output stream;

Article 2 – paragraph 4 – point a k (new)

(14) ‘e-drive motor’ means an electric motor that converts electrical input power into mechanical output power to provide traction to a vehicle;

Amendment 92

(15) ‘electric vehicle battery’ means electric vehicle battery as defined in Article 3(1), point (14), of Regulation (EU) 2023/1542;

Proposal for a regulation

▌

Article 2 – paragraph 5 – introductory part

(16) ‘authorised treatment facility’ means any establishment or undertaking that is permitted in accordance with Directive 2008/98/EC and this Regulation to carry out collection, storage and treatment operations of end-of-life vehicles, including their parts and components;

Amendment 93

(17) ‘shredding’ means an operation used for tearing into pieces or fragmenting end-of-life vehicles;

Proposal for a regulation

(18) ‘treatment’ means any activity taking place after the end-of-life vehicle has been handed over to a facility for depollution, dismantling, compacting, shearing, shredding, recovery or preparation prior to disposal of the shredder waste, and another operation carried out for the recovery or disposal of the end-of-life vehicle and its parts, components and materials;

Article 2 – paragraph 6 – introductory part

(19) ‘repair and maintenance operator’ means a natural or legal person who pursues a professional activity directly or indirectly involving the repair and maintenance of vehicles, including repairers, manufacturers or distributors of repair equipment, tools or spare parts, as well as publishers of technical information, automobile clubs, roadside assistance operators, operators offering inspection and testing services, operators offering training for installers as well as manufacturers and repairers of equipment for alternative-fuel vehicles;

Amendment 94

(20) ‘making available on the market’ means a supply of a vehicle for distribution or use on the market in the course of a commercial activity, whether in return for payment or free of charge;

Proposal for a regulation

(21) ‘placing on the market’ means making available a vehicle for the first time on the Union market;

Article 2 – paragraph 6 a (new)

(22) ‘waste management operator’ means any natural or legal person dealing on a professional basis with the collection or treatment of end-of-life vehicles, including their parts and components;

Amendment 95

(23) ‘producer’ means any manufacturer, importer or distributor who, irrespective of the selling technique used, including by means of distance contracts as defined in Article 2, point (7), of Directive 2011/83/EU of the European Parliament and of the Council, makes available a vehicle for the first time for distribution or use, within a territory of a Member State on a professional basis;

Proposal for a regulation

(24) ‘producer responsibility organisation’ means a legal entity that financially or financially and operationally organises the fulfilment of extended producer responsibility obligations on behalf of several producers;

Article 3 – paragraph 1 – point 1

(25) ‘authorised representative for the extended producer responsibility’ means a natural or legal person established in a Member State in which the producer makes vehicles available on the market for the first time, other than the Member State or the third country where the producer is established, and is appointed by the producer in accordance with Article 8a(5), third subparagraph, of Directive 2008/98/EC to fulfil the obligations of that producer under Chapter IV of this Regulation;

Amendment 96

(26) ‘authorised representative for the cross-border mechanism’ means a natural or legal person established in a Member State and appointed by the manufacturer in accordance with Article 22;

Proposal for a regulation

(27) ‘secondary raw materials’ means materials that can substitute for primary raw materials and that have been obtained through recycling processes;

Article 3 – paragraph 1 – point 2

(28) ‘vehicle owner’ means any natural or legal person holding the ownership right of a vehicle or the holder of the vehicle registration certificate or, if neither the holder of the ownership right nor the holder of the vehicle registration certificate can be identified, the holder of the vehicle;

Amendment 97

(29) ‘post-shredder technology’ means techniques and technologies used to process materials from end-of-life vehicles, after they have been shredded, for further recovery in accordance with Part G, point 2, of Annex VIII;

Proposal for a regulation

(30) ‘remanufacturing’ means professional actions through which a new part or component is manufactured to return to same-as-new condition from parts and components that are ▌ removed from vehicles or end-of-life vehicles and through which at least one change is made ▌ that affects the safety, lifetime, performance, purpose or type of the part or component, in a process that is in compliance with specific technical specifications, including engineering, quality and testing standards;

Article 3 – paragraph 1 – point 7 a (new)

(31) ‘refurbishment’ means actions carried out to prepare, clean, test, service and, where necessary, repair a part or component that is removed from vehicles or endoflife vehicles in order to restore its performance or functionality ▌ within the intended use and range of performance originally conceived at the design stage ▌ at the time of the placing of the part or component on the market;

Amendment 98

▌

Proposal for a regulation

(32) ‘non-inert waste’ means waste that does not meet the conditions of definition of ‘inert waste’ laid down in Article 2, point (e), of Council Directive 1999/31/EC;

Article 3 – paragraph 1 – point 9

(33) ‘used vehicle’ means a vehicle which has been registered in a Member State or a third country and is not an end-of-life vehicle;

Amendment 99

(34) ‘used vehicle to be exported’ means a used vehicle that is to be placed under the customs procedure, as laid down in Article 269 of Regulation (EU) No 952/2013;

Proposal for a regulation

(35) ‘economic operator’ means a producer, collector, vehicle insurance company, supplier, repair and maintenance operator, waste management operator, including a dismantler or recycler, and any other operator involved in design of vehicles, trade in used vehicles, dismantling, reuse, or management of end-of-life vehicles, remanufacturing and refurbishment of parts, components and materials from vehicles;

Article 3 – paragraph 1 – point 9 a (new)

▌

Amendment 100

(36) ‘roadworthy vehicle’ means a vehicle that is roadworthy in accordance with Directive 2014/45/EU;

Proposal for a regulation

(37) ‘retrofit operator’ means any legal person that manufactures an electric conversion kit or performs the conversion of internal combustion engine vehicles to battery-electric or fuel cell vehicles;

Article 3 – paragraph 1 – point 10 a (new)

(38) ‘collection point’ means an economic operator, other than an authorised treatment facility, which temporarily stores end-of-life vehicles and prepares the transfer of the collected end-of-life vehicles to authorised treatment facilities for treatment;

Amendment 101

(39) ‘waste’, ‘waste oils’, ‘waste holder’, ‘waste management’, ‘collection’, ‘prevention’, ‘recovery’, ‘recycling’, ‘backfilling’, ‘disposal’ and ‘extended producer responsibility scheme’ mean waste, waste oils, waste holder, waste management, collection, prevention, recovery, recycling, backfilling, disposal and extended producer responsibility scheme as defined in Article 3, points (1), (3), (6), (9), (10), (12), (15), (17), (17a), (19) and (21), respectively, of Directive 2008/98/EC;

Proposal for a regulation

(40) except for Lcategory vehicles: ‘type-approval’, ‘multi-stage type-approval’, ‘component’, ‘parts’, ‘spare parts’, ‘base vehicle’, ‘vehicle produced in small series’, ‘special purpose vehicle’, ‘market surveillance authority’, ‘approval authority’, ‘manufacturer’, ‘importer’ and ‘distributor’ mean type-approval, multi-stage type-approval, component, parts, spare parts, base vehicle, vehicle produced in small series, special purpose vehicle, market surveillance authority, approval authority, manufacturer, importer and distributor as defined in Article 3, points (1), (8), (19), (21), (23), (24), (30), (31), (35), (36), (40), (42) and (43), respectively, of Regulation (EU) 2018/858;

Article 3 – paragraph 1 – point 11 a (new)

(41) for Lcategory vehicles : ‘typeapproval’, ‘base vehicle’, ‘component’, ‘parts’, ‘spare parts’, ‘manufacturer’, ‘importer’, ‘distributor’, ‘approval authority’ and ‘market surveillance authority’ mean typeapproval, base vehicle, component, parts, spare parts, manufacturer, importer, distributor, approval authority, and market surveillance authority as defined in Article 3, points (1), (11), (16), (18), (21), (47), (49), (50), (56) and (57), respectively, of Regulation (EU) No 168/2013, and ‘vehicle produced in small series’ means vehicle produced in small series as referred to in Article 42 of that Regulation;

Amendment 102

(42) ‘registration’, ‘registration certificate’, ‘holder of registration certificate’, ‘suspension’ and ‘cancellation of registration’ mean registration, registration certificate, holder of registration certificate, suspension and cancellation of registration as defined in Article 2, points (b), (c), (d), (e) and (f), respectively, of Directive 1999/37/EC;

Proposal for a regulation

(43) ‘vehicle of historical interest’, ‘roadworthiness test’ and ‘roadworthiness certificate’ mean vehicle of historical interest, roadworthiness test and roadworthiness certificate as defined in Article 3, points (7), (9) and (12), respectively, of Directive 2014/45/EU;

Article 3 – paragraph 1 – point 14

(44) ‘substance of concern’ and ‘data carrier’ mean substance of concern and data carrier as defined in Article 2, points (27) and (29), respectively, of Regulation (EU) 2024/1781;

Amendment 103

(45) ‘customs authorities’ means customs authorities as defined in Article 5, point (1), of Regulation (EU) No 952/2013;

Proposal for a regulation

(46) 'online platform' means online platform as defined in Article 3, point (i), of Regulation (EU) 2022/2065;

Article 3 – paragraph 1 – point 14 a (new)

(47) ‘small-volume manufacturer’ means small-volume manufacturer as defined in Article 3, point (48), of Regulation (EU) 2024/1257;

Amendment 104

(48) ‘light means of transport battery’ or ‘LMT battery’ means light means of transport battery or LMT battery, respectively, as defined in Article 3, point (11), of Regulation (EU) 2023/1542;

Proposal for a regulation

(49) ‘packaging waste’ means packaging waste as defined in Article 3, point (25), of Regulation (EU) 2025/40 of the European Parliament and of the Council;

Article 3 – paragraph 1 – point 15

(50) ‘waste electrical and electronic equipment’ means waste electrical and electronic equipment as defined in Article 3(1), point (e), of Directive 2012/19/EU of the European Parliament and of the Council;

Amendment 105

(51) ‘biobased plastics’ means biobased plastics as defined in Article 3, point 53, of Regulation (EU) 2025/40;

Proposal for a regulation

(52) ‘reclamation’ means reclamation as defined in Article 3, point (13), of Regulation (EU) 2024/573.

Article 3 – paragraph 1 – point 18

Chapter II Circularity requirements

Amendment 106

Article 4 Reusability, recyclability and recoverability of vehicles

Proposal for a regulation

1. Each vehicle belonging to a vehicle type that is type-approved as from … [the first day of the month following 72 months from the date of entry into force of this Regulation] under Regulation (EU) 2018/858 shall be constructed so that it is:

Article 3 – paragraph 1 – point 21

(a) reusable or recyclable to a minimum of 85 % by mass;

Amendment 107

(b) reusable or recoverable to a minimum of 95 % by mass.

Proposal for a regulation

2. For each vehicle type referred to in paragraph 1, manufacturers shall take the following measures:

Article 3 – paragraph 1 – point 22

(a) collect the necessary data through the full chain of supply, in particular the nature and the mass of all materials used in the construction of the vehicles, to ensure continued compliance with this Regulation;

Amendment 108

(b) keep all the other appropriate vehicle data required by the calculation process referred to in point (e);

Proposal for a regulation

(c) establish procedures to verify the correctness and completeness of the information received from the suppliers;

Article 3 – paragraph 1 – point 23

(d) manage and document the breakdown of the materials;

Amendment 109

(e) calculate the reusability, recyclability and recoverability rates for the purposes of paragraph 1 of this Article in accordance with the methodology established by the Commission under paragraph 3 of this Article or, before such methodology has been adopted and entered into application, in accordance with international standard ISO 22628:2002 in combination with the elements set out in Part A of Annex III to this Regulation;

Proposal for a regulation

(f) mark the parts and components of the vehicles made of polymers and elastomers in accordance with Article 12(1);

Article 3 – paragraph 1 – point 24

(g) ensure that parts and components listed in Part E of Annex VIII are not reused in the construction of new vehicles.

Amendment 110

▌

Proposal for a regulation

3. The Commission shall, by … [the last day of the month following 29 months from the date of entry into force of this Regulation], adopt an implementing act establishing a new methodology for calculation and verification of the rates of reusability, recyclability and recoverability of a vehicle, taking into account the elements set out in Annex III to this Regulation and international standard ISO 22628:2002. That implementing act shall be adopted in accordance with the examination procedure referred to in Article 52(2).

Article 3 – paragraph 1 – point 27

Article 5 Requirements for substances in vehicles

Amendment 111

1. The presence of substances of concern in vehicles and in their parts and components shall be minimised as far as possible.

Proposal for a regulation

2. By … [18 months from the date of entry into force of this Regulation], the Commission shall prepare a report on the presence of substances of concern in vehicles, to determine the extent to which they negatively affect the reuse and recycling of materials or have an adverse effect on the environment or health. The Commission shall be assisted by the Agency on aspects of chemical safety. The report shall not cover substances of concern in vehicle parts and components for which an identification or assessment is already required by other Union legislation. The Commission shall submit the report to the European Parliament and to the Council, setting out its findings, and consider the appropriate follow-up measures. If a Member State considers that a substance negatively affects the reuse and recycling of materials in a vehicle in which it is present, it shall, by … [30 months from the date of entry into force of this Regulation], supply such information to the Commission and, on aspects of chemical safety, also to the Agency and, where available, refer to any relevant risk assessments or other relevant data.

Article 3 – paragraph 1 – point 28

3. The Commission is empowered to adopt delegated acts in accordance with Article 51 to supplement this Regulation by establishing information requirements and restrictions for the presence of substances of concern that negatively affect the reuse and recycling of materials in vehicles and in their parts and components for reasons not relating primarily to chemical safety.

Amendment 112

4. ▌Any vehicle type that is type-approved as from … [the first day of the month following 72 months from the date of entry into force of this Regulation], under Regulation (EU) 2018/858, or any new parts or components placed on the market for such a vehicle shall not contain lead, mercury, cadmium or hexavalent chromium.

Proposal for a regulation

▌

Article 3 – paragraph 1 – point 29

5. By way of derogation from paragraph 4 of this Article, vehicle types or parts and components placed on the market for such vehicles may contain lead, mercury, cadmium or hexavalent chromium under the conditions and up to the maximum concentration values laid down in Annex IV to this Regulation. Paragraphs 2, 3 and 4 of this Articleand this paragraph shall not apply to batteries incorporated in vehicles to which Regulation (EU) 2023/1542 applies.

Amendment 113

6. The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend Annex IV in order to adapt it to scientific and technical progress by:

Proposal for a regulation

(a) establishing maximum concentration values up to which the presence of lead, mercury, cadmium or hexavalent chromium in specific parts, components and homogenous materials of vehicles is to be tolerated;

Article 3 – paragraph 1 – point 35

(b) exempting certain parts, components and homogenous materials of vehicles from the prohibition on the presence of lead, mercury, cadmium or hexavalent chromium set out in paragraph 4 where the following conditions are fulfilled:

Amendment 114

(i) the use of those substances is unavoidable;

Proposal for a regulation

(ii) it is demonstrated that socio-economic benefits outweigh the risk to the environment or human health arising from the use of those substances;

Article 3 – paragraph 1 – point 35 a (new)

(iii) there are no suitable alternative substances or technologies;

Amendment 115

(c) deleting parts, components and homogenous materials of vehicles from Annex IV, if the use of lead, mercury, cadmium or hexavalent chromium is avoidable;

Proposal for a regulation

(d) designating the parts, components and homogenous materials of vehicles that are to be removed before further treatment and require them to be labelled or made identifiable by other appropriate means.

Article 3 – paragraph 1 – point 35 b (new)

The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend Annex IV, in particular by removing certain exemptions for homogenous materials and components from the list, in cases where the specific exemption is addressed under other Union legislation.

Amendment 116

When adopting a delegated act pursuant to this paragraph, the Commission shall take into account the socio-economic impact of introducing, modifying or deleting an exemption to the restriction on the use of lead, mercury, cadmium or hexavalent chromium in vehicle types, including the availability of alternatives and the impacts on the environment and human health across the full lifecycle of vehicles.

Proposal for a regulation

7. Upon request from the Commission, the Agency shall prepare within 12 months a report, based inter alia on consultation with stakeholders, on the technical and economic feasibility of alternatives to existing exemptions listed in Annex IV and, based on such assessment, a duly reasoned proposal for the specific amendment of any such exemption.

Article 3 – paragraph 1 – point 35 c (new)

8. As soon as it receives the request from the Commission, the Agency shall publish on its website a notice that a report on a possible amendment of an exemption listed in Annex IV will be prepared and invite Member States and all interested parties to submit comments within 12 weeks of the date of publication of that notice. The Agency shall publish on its website all comments received from Member States and interested parties.

Amendment 117

9. At the latest 12 months following the submission of the report referred to in paragraph 7 to the Commission, the Committee for Socio-economic Analysis of the Agency, set up pursuant to Article 76(1), point (d), of Regulation (EC) No 1907/2006, shall adopt an opinion on the report and on the specific amendments proposed. The Agency shall submit that opinion to the Commission without delay.

Proposal for a regulation

▌

Article 3 – paragraph 1 – point 35 d (new)

Article 6 Minimum recycled content in vehicles

Amendment 118

1. The plastic contained in each new vehicle type that is type-approved as from … [the first day of the month following 72 months from the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 15 % of plastic recycled by weight from post-consumer plastic waste.

Proposal for a regulation

The plastic contained in each new vehicle type that is type-approved as from … [the first day of the month following 120 months from the date of entry into force of the Regulation] under Regulation (EU) 2018/858 shall contain a minimum of 25 % of plastic recycled by weight from post-consumer plastic waste.

Article 3 – paragraph 1 – point 35 e (new)

2. At least 20 % of the target set out in paragraph 1 shall be achieved by including in the vehicle type concerned plastics recycled from end-of-life vehicles or from parts and components removed from vehicles during the use phase.

Amendment 119

3. The weight of the plastic contained in each new vehicle type concerned and the weight of recycled plastic referred to in paragraphs 1 and 2 shall exclude elastomers from tyres and from thermosets other than polyurethane foams used for cushioning.

Proposal for a regulation

▌

Article 3 – paragraph 2 – point e

4. For the purposes of the obligations laid down in paragraphs 1, 2, and 3, recycled content shall be recovered from post-consumer waste, which has been recycled either in:

Amendment 120

(a) an installation located in the Union; or

Proposal for a regulation

(b) from … [48 months from the date of entry into force of this Regulation], an installation located in a third country, provided that such installation meets the requirements of Annex XIII.

Article 3 – paragraph 2 – point e a (new)

By … [the last day of the month following 24 months from the date of entry into force of this Regulation], the Commission shall more comprehensively assess the expected impact on global trade, as well as on the Union recycling and automotive industries and report its assessment to the European Parliament and to the Council.

Amendment 121

5. By … [the last day of the month following 23 months from the date of entry into force of this Regulation], the Commission shall adopt an implementing act in accordance with Article 52(2) to establish the methodology for the calculation and verification, for the purposes of paragraphs 1 to 4 of this Article, of the share of plastics recycled from post-consumer waste, and from end-of-life vehicles ▌, present in and incorporated into vehicle types.

Proposal for a regulation

A mass balance accounting methodology shall apply to recycled plastic obtained from recycling methods other than mechanical recycling, in line with the mass balance accounting methodologies applicable to plastics recycling in line with the definition of recycling in Directive 2008/98/EC.

Article 4 – paragraph 1 – introductory part

The verification methodology shall include an obligation for manufacturers to ensure that each installation located in a third country producing recycled content material that they are using complies with Annex XIII, and that each such installation located in a third country is being audited at least every five years by an independent third-party entity pursuant to Annex XIV. Those audits shall verify that the conditions set out in paragraph 1 to 4 of this Article are met.

Amendment 122

The audit requirement set out in the third subparagraph of this paragraph and the requirements and criteria set out in Annex XIII for material recycled in third countries shall apply from … [48 months from the date of entry into force of this Regulation].

Proposal for a regulation

6. The Commission shall be empowered to adopt delegated acts in accordance with Article 51 to supplement paragraphs 1 and 2 of this Article by laying down temporary derogations to the recycled plastic content targets, or timing in the event that lack of availability or excessive prices of specific recycled plastics make compliance with the minimum percentages of recycled content excessively difficult.

Article 4 – paragraph 2 – point c

7. By … [the last day of the month following 12 months from the date of entry into force of this Regulation], the Commission shall assess the feasibility of establishing a requirement on the minimum share of ▌recycled ▌steel, considering in particular the following :

Amendment 123

▌

Proposal for a regulation

(a) the current and forecast availability of ferrous scrap, considering flat and long steel and, where relevant, stainless-steel product families;

Article 4 – paragraph 2 a (new)

(b) the current share of ferrous scrap in various steel semi-products and intermediates related to steel families used in vehicles and expected changes related to the transition of the automotive industry;

Amendment 124

(c) the potential uptake of ferrous scrap by manufacturers in vehicles to be typeapproved in the future and the respective potential contribution to higher scrap utilisation levels considering the different compositional constraints applicable to each steel product family;

Proposal for a regulation

(d) the relative demand of the automotive sector in comparison to the demand for ferrous scrap of other sectors, considering the ability to tolerate copper content and other unintended tramp inclusions;

Article 4 – paragraph 3 – subparagraph 1

(e) economic viability, technical and scientific progress, including changes in the availability of recycling technologies concerning steel recycling rates, as well as the necessity to address market failures hindering the utilisation of post-consumer versus pre-consumer steel scrap;

Amendment 125

(f) the contribution of a minimum share of recycled content of steel in vehicles to the Union’s open strategic autonomy, climate, ▌ environmental and industrial objectives, in particular as regards the creation of complementary lead markets for decarbonised steel production;

Proposal for a regulation

(g) the need to prevent disproportionate negative impacts on the affordability of vehicles; and

Article 5 – paragraph 1

(h) the influence on the overall costs and competitiveness of the automotive sector and the entire automotive steel value chain.

Amendment 126

▌

Proposal for a regulation

By … [the last day of the month following 24 months from the date of entry into force of this Regulation], the Commission shall adopt a delegated act, in accordance with Article 51, to supplement this Regulation by establishing a minimum share of steel recycled from post-consumer steel waste and, where relevant, ferrous scrap to be present ▌in and incorporated into vehicle types to be type-approved in accordance with this Regulation and Regulation (EU) 2018/858. That delegated act shall also set the date of application of the obligation to have a minimum share of recycled content no later than … [84 months from the date of entry into force of this Regulation]. Steel used as reinforcement materials in tyres shall not be considered to fall within the scope of that delegated act.

Article 5 – paragraph 2

By … [the last day of the month following 24 months from the date of entry into force of this Regulation], the Commission shall adopt a delegated act, in accordance with ▌ Article 51, establishing the methodology for the calculation and verification of the share of steel recycled from post-consumer steel waste in vehicle types and, if applicable, from ferrous scrap, present in and incorporated into vehicle types.

Amendment 127

8. By … [the last day of the month following 12 months from the date of entry into force of this Regulation], the Commission shall assess the feasibility of establishing a requirement on the minimum share of aluminium and its alloys, recycled from post-consumer waste present in and incorporated into vehicle types, considering in particular the following:

Proposal for a regulation

(a) the current and forecast availability of aluminium and its alloys ▌recycled from pre-consumer and post-consumer waste ▌; ▌

Article 5 – paragraph 5

(b) the current shares of recycled content from post-consumer waste in aluminium and its alloys in vehicles placed on the market;

Amendment 128

(c) economic viability, technical and scientific progress, including changes in the availability of recycling technologies concerning the type of materials recycled, and their recycling rates;

Proposal for a regulation

(d) the contribution of a minimum share of recycled content of aluminium in vehicles to the Union’s open strategic autonomy, climate environmental and industrial objectives, in particular as regards the creation of complementary lead markets for decarbonised aluminium and its alloys;

Article 5 – paragraph 6

(e) the need to prevent disproportionate negative impacts on the affordability of vehicles containing aluminium and its alloys; and

Amendment 129

(f) the influence on the overall costs and competitiveness of the automotive sector.

Proposal for a regulation

By … [the last day of the month following 24 months from the date of entry into force of this Regulation] the Commission shall adopt a delegated act, in accordance with Article 51, to supplement this Regulation by establishing a minimum share of recycled aluminium and its alloys to be present in and incorporated into vehicle types to be type-approved in accordance with this Regulation and Regulation (EU) 2018/858. That delegated act shall also set the date of application of the obligation to have a minimum share of recycled content no later than … [84 months from the entry into force of this Regulation].

Article 5 – paragraph 7

By … [the last day of the month following 24 months from the date of entry into force of this Regulation], the Commission shall adopt a delegated act, in accordance with Article 51, establishing the methodology for the calculation and verification of the share of aluminium and its alloys recycled from post-consumer waste in vehicle types and, if applicable from pre-consumer waste, present in and incorporated into vehicle types.

Amendment 130

9. By … [the last day of the month following 35 months from the date of entry into force of this Regulation], the Commission shall assess the feasibility of establishing a requirement on the minimum share of:

Proposal for a regulation

(a) magnesium and its alloys, recycled from pre-consumer and post-consumer waste and present in and incorporated into vehicle types; and

Article 6 – paragraph 1 – subparagraph 1

(b) neodymium, dysprosium, praseodymium, terbium, samarium, nickel, cobalt or boron recycled from post-consumer waste and, where relevant, pre-consumer waste, present in and incorporated into permanent magnets.

Amendment 131

▌

Proposal for a regulation

▌The feasibility assessment shall take into account ▌ the following:

Article 6 – paragraph 1 – subparagraph 1 a (new)

(a) the current and forecast availability of the materials referred to in the first subparagraph, points (a) and (b), recycled from pre-consumer and post-consumer waste;

Amendment 132

(b) the current shares of recycled content from post-consumer waste in the materials referred to in the first subparagraph, points (a) and (b), in vehicles placed on the market;

Proposal for a regulation

(c) economic viability, technical and scientific progress, including changes in the availability of recycling technologies concerning the type of materials recycled, and their recycling rates;

Article 6 – paragraph 1 – subparagraph 1 b (new)

(d) the contribution of a minimum share in vehicles of recycled content of the materials referred to in the first subparagraph, points (a) and (b), to the Union’s strategic autonomy and its climate and environmental objectives;

Amendment 133

(e) possible impacts on the functioning of vehicles from incorporating recycled content of the materials referred to in the first subparagraph, points (a) and (b), into vehicle parts and components;

Proposal for a regulation

(f) the need to prevent disproportionate negative impacts on the affordability of vehicles containing the materials referred to in the first subparagraph, points (a) and (b);

Article 6 – paragraph 1 a (new)

(g) the influence on the overall costs and competitiveness of the automotive sector.

Amendment 134

After finalisation of the assessment referred to in the first subparagraph, the Commission is empowered to adopt a delegated act, in accordance with Article 51, to supplement this Regulation by establishing a minimum share of:

Proposal for a regulation

(a) magnesium and its alloys, recycled from post-consumer waste and, where relevant, pre-consumer waste, present in and incorporated into vehicle types; and

Article 6 – paragraph 1 b (new)

(b) neodymium, dysprosium, praseodymium, terbium, samarium, nickel, cobalt or boron recycled from post-consumer waste and, where relevant, pre-consumer waste, present in and incorporated into permanent magnets.

Amendment 135

The delegated act referred to in the third subparagraph shall also set the date of application of the obligation to have a minimum share of recycled content.

Proposal for a regulation

By … [the last day of the month following 36 months from the date of entry into force of this Regulation], the Commission shall adopt a delegated act, in accordance with Article 51, establishing the methodology for the calculation and verification of the share of the recycled materials referred to in the third subparagraph present in and incorporated into vehicle types.

Article 6 – paragraph 1 c (new)

▌

Amendment 136

Article 7 Design to enable removal and replacement of certain parts and components in vehicles

Proposal for a regulation

1. Each vehicle belonging to a new vehicle type that is type-approved as from … [the first day of the month following 72 months from the date of entry into force of this Regulation] under Regulation (EU) 2018/858 and Regulation (EU) No 168/2013 shall be designed in a way which does not hinder the removal by authorised treatment facilities of the parts and components listed in Part C of Annex VIII from the concerned vehicle during the waste phase of the vehicle with a view to replacement, reuse, recycling, remanufacturing or refurbishing where technically feasible.

Article 6 – paragraph 2

2. Each vehicle belonging to a new vehicle type that is type-approved as from … [the first day of the month following 72 months from the date of entry into force of this Regulation] under Regulation (EU) 2018/858 shall be designed ▌ to enable, in a readily and non-destructive manner, the removal and replacement of electric vehicle batteries and their battery packs and e-drive motors from the vehicle by authorised treatment facilities or repair and maintenance operators during the use phase and waste phase of the vehicle.

Amendment 137

3. The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend paragraph 2 by including additional parts and components listed in Part C of Annex VIII, taking into account technical and scientific progress.

Proposal for a regulation

4. The Commission may adopt implementing acts laying down the conditions for the design for removal and replacement of parts and components referred to in paragraph 2 where necessary to ensure harmonised implementation of the obligation set out in that paragraph. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 52(2).

Article 6 – paragraph 3 – subparagraph 1

5. Manufacturers shall not hinder the removal and replacement of vehicle parts and components using software updates, unless otherwise provided for in Union law.

Amendment 138

Chapter III Obligations of manufacturers

Proposal for a regulation

Article 8 General obligations

Article 6 – paragraph 3 – subparagraph 2 – introductory part

1. Manufacturers shall demonstrate that new vehicle types that they have manufactured and that are placed on the market are type-approved in accordance with the requirements of Regulation (EU) 2018/858, Regulation (EU) No 168/2013 and this Regulation.

Amendment 139

2. For the purposes of type-approval of vehicle types to which the requirements in Articles 4, 5, 6 or 7 apply, the manufacturer shall provide the documentation showing compliance with those requirements and shall:

Proposal for a regulation

(a) include it in the information folder referred to in Article 24 of Regulation (EU) 2018/858 or in Article 27 of Regulation (EU) No 168/2013, as applicable; and

Article 6 – paragraph 3 – subparagraph 2 – point a

(b) submit it to the type-approval authority in accordance with Article 23 of Regulation (EU) 2018/858 or in Article 26 of Regulation (EU) No 168/2013, as applicable.

Amendment 140

▌

Proposal for a regulation

3. For the purposes of type-approval of vehicles to which the requirements set out in Article 10 of this Regulation apply, the manufacturer shall draw up the information referred to in Article 10(1) of this Regulation and submit it, in accordance with Article 24(1), point (a), of Regulation (EU) 2018/858, to the type-approval authority together with the application for typeapproval referred to in Article 23 of that Regulation.

Article 6 – paragraph 3 – subparagraph 2 – point b

4. For the purposes of type-approval of vehicles to which the requirements set out in Article 11 of this Regulation apply, the manufacturer shall submit the declaration confirming compliance with the requirement set out in Article 11(1) of this Regulation, in accordance with 24(1), point (a), of Regulation (EU) 2018/858, or with Article 27(1) of Regulation (EU) 168/2013, as applicable, to the type-approval authority together with the application for type-approval.

Amendment 141

Article 9 Circularity strategy

Proposal for a regulation

1. ▌Each manufacturer shall as from … [the first day of the month following 36 months from the date of entry into force of this Regulation] ▌ draw up a circularity strategy at manufacturer level.

Article 6 – paragraph 3 – subparagraph 2 – point c

2. The circularity strategy shall describe which actions the manufacturer will take to follow up on its obligations in order to ensure that the circularity requirements in Chapter II ▌ are met.

Amendment 142

3. The circularity strategy shall contain the elements laid down in Part A of Annex V.

Proposal for a regulation

4. Each manufacturer shall provide the type-approval authorities of the Member States and the Commission with a copy of the circularity strategy ▌ within 30 days after it has been drawn up.

Article 6 – paragraph 3 – subparagraph 2 – point d

5. Each manufacturer shall monitor and follow up on the actions contained in the circularity strategy and update the strategy, indicating the relevant new changes of the circularity strategy, every five years in accordance with Part B of Annex V. The manufacturer shall provide an updated circularity strategy to the Commission.

Amendment 143

6. The Commission shall make the circularity strategies and any updates to those strategies publicly available, except for confidential information.

Proposal for a regulation

▌

Article 6 – paragraph 3 – subparagraph 2 – point e

7. By … [the last day of the month following 83 months from the date of entry into force of this Regulation] and at least every six years thereafter, the Commission shall draw up and publish a report on the circularity of the automotive sector. That report shall be based in particular on circularity strategies and updates to such strategies.

Amendment 144

Article 10 Declaration on recycled content present in vehicles

Proposal for a regulation

1. Manufacturers shall declare, for each new vehicle type that is type-approved under Regulation (EU) 2018/858 as from ▌ the first day of the month following 12 months from the adoption of the respective methodologies for the calculation and verification of the share of the materials recycled from post-consumer waste in vehicle types, as referred to in Article 6 of this Regulation, the respective share of recycled content of:

Article 6 – paragraph 3 – subparagraph 2 – point f

(a) neodymium, dysprosium, praseodymium, terbium, samarium, nickel, cobalt and boron in permanent magnets in e-drive motors;

Amendment 145

(b) aluminium and its alloys;

Proposal for a regulation

(c) magnesium and its alloys;

Article 6 – paragraph 3 – subparagraph 2 – point g

(d) steel and its alloys;

Amendment 146

(e) plastics.

Proposal for a regulation

The declaration shall concern the recycled content of those materials present in the vehicle type and indicate, per material share, and for plastic components heavier than 100 grams, whether the material is recycled from pre-consumer waste or from post-consumer waste.

Article 6 – paragraph 3 – subparagraph 2 – point h

2. The type-approval authorities shall verify that the required documentation has been submitted by the manufacturers and that it contains the information referred to in paragraph 1.

Amendment 147

3. By way of derogation from paragraph 1, the requirement to declare the share of recycled content of a certain material shall not apply where a target has become applicable for that material under Article 6.

Proposal for a regulation

Article 11 Information on removal and replacement of parts, components and materials present in vehicles

Article 6 – paragraph 3 – subparagraph 2 – point h a (new)

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], manufacturers shall, for new vehicle types that have been type-approved, provide waste management operators, publishers of technical information and repair and maintenance operators unrestricted, standardised and non-discriminatory access to the information listed in Annex VI, enabling access to, and safe removal and replacement of, the following, unless that information is available under other Union legislation:

Amendment 148

(a) electric vehicle batteries and their battery packs incorporated in the vehicle;

Proposal for a regulation

▌

Article 6 – paragraph 3 – subparagraph 2 – point h b (new)

(b) parts, components and materials which contain the fluids and liquids listed in Part B of Annex VIII and which are contained in vehicles;

Amendment 149

(c) parts and components listed in Part C of Annex VIII contained in vehicles;

Proposal for a regulation

(d) parts and components which contain the critical raw materials as referred to in Article 28(1), point (b), ▌ of Regulation (EU) 2024/1252 at the time of the typeapproval of the vehicle;

Article 6 – paragraph 3 – subparagraph 2 – point h c (new)

(e) digitally coded components and parts in a vehicle, where such coding prevents their repair, maintenance or replacement in another vehicle.

Amendment 150

Point (e) of the first subparagraph shall not apply to information to be provided to publishers of technical information.

Proposal for a regulation

2. Manufacturers shall make rescue and emergency response guidance information available to emergency services.

Article 6 – paragraph 3 – subparagraph 3

3. Manufacturers shall ensure cooperation with the authorised treatment facilities, publishers of technical information, retrofit operators, and repair and maintenance operators by establishing necessary communication platforms to provide and keep uptodate the information referred to in paragraph 1 and the information specified in Annex VI.

Amendment 151

The manufacturers shall provide the information referred to in the first subparagraph free of charge. The manufacturers may collect reasonable and proportionate charges from waste management operators, publishers of technical information and repair and maintenance operators to the extent necessary to cover the actual administrative costs incurred for making the required information accessible through communication platforms.

Proposal for a regulation

4. The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend Annex VI by revising the list of parts, components and materials of vehicles and the scope of information to be provided by the manufacturers. The Commission shall take into account technical and regulatory developments, current information technology and foreseeable vehicle technology developments.

Article 6 – paragraph 3 – subparagraph 4

Article 12 Labelling of parts, components and materials present in vehicles

Amendment 152

1. Manufacturers and their suppliers shall use the nomenclature of the component and material coding standards listed in points 1, 2 and 3 of Annex VII for the labelling and identification of parts, components and materials of vehicles.

Proposal for a regulation

▌

Article 6 – paragraph 4 – subparagraph 1 – introductory part

2. The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend Annex VII in order to adapt it to technical and scientific progress.

Amendment 153

Article 13 Digital Circularity Vehicle Passport

Proposal for a regulation

1. From … [the first day of the month following 72 months from the entry into force of the Regulation], each vehicle placed on the market shall have a Digital Circularity Vehicle Passport, which shall be aligned, interoperable and, ▌ where possible, integrated with other vehicle related environmental passports established under Union law, in particular the passports referred to in Article 77 of Regulation (EU) 2023/1542, in Article 3, point (68), of Regulation (EU) 2024/1257 and with other relevant passports established pursuant to Regulation (EU) 2024/1781.

Article 6 – paragraph 4 – subparagraph 1 – point a

2. The Digital Circularity Vehicle Passport of a vehicle that is being placed on the market shall be accessible free of charge and shall contain, in digital format, the following:

Amendment 154

(a) the information referred to in Article 11;

Proposal for a regulation

(b) the information about parts containing lead, mercury, cadmium or hexavalent chromium content of the vehicle as referred to in the derogation set out in Article 5(5);

Article 6 – paragraph 4 – subparagraph 1 – point b

(c) the declaration on the share of recycled content of plastic and the materials listed in Article 10(1);

Amendment 155

▌

Proposal for a regulation

(d) the official catalogue of spare parts for the vehicle type concerned.

Article 6 – paragraph 4 – subparagraph 2

3. Where information required under this Article is already accessible through a passport referred to in paragraph 1 other than the Digital Circularity Vehicle Passport, the information required under paragraph 2 shall not be duplicated in the Digital Circularity Vehicle Passport, provided that interoperability is ensured.

Amendment 156

4. The manufacturer placing the vehicle on the market shall ensure that the information referred to in paragraph 2 is accurate, complete and up to date.

Proposal for a regulation

5. All information included in the Digital Circularity Vehicle Passport shall comply with the rules established by the Commission under paragraph 6 and shall be:

Article 6 – paragraph 4 – subparagraph 3 – introductory part

(a) based on open standards;

Amendment 157

(b) developed with an interoperable format;

Proposal for a regulation

(c) transferable through an open interoperable data exchange network without vendor lock-in;

Article 6 – paragraph 4 – subparagraph 3 – point a

(d) machine-readable, structured and searchable.

Amendment 158

▌

Proposal for a regulation

6. By … [48 months from the date of entry into force of the Regulation], the Commission shall adopt implementing acts laying down rules on the following:

Article 6 – paragraph 4 – subparagraph 4

(a) the manner and basic requirements of the technical ▌ solution to be used for accessing the Digital Circularity Vehicle Passport in a manner that does not preclude any technological solution;

Amendment 159

(b) the technical design and operation requirements for the Digital Circularity Vehicle Passport, including rules on:

Proposal for a regulation

(i) the alignment and interoperability of the Digital Circularity Vehicle Passport with other passports required by Union legislation;

Article 6 – paragraph 4 – subparagraph 5

(ii) the storage and processing of information included in the Digital Circularity Vehicle Passport;

Amendment 160

(iii) the availability of the Digital Circularity Vehicle Passport after the manufacturer responsible for the fulfilment of the obligations set out in paragraph 4 ceases to exist or ceases its activity in the Union;

Proposal for a regulation

(c) the introduction, modification and updating of information included in the Digital Circularity Vehicle Passport by third parties other than the manufacturer;

Article 7 – paragraph 1

(d) the conditions for access to the Digital Circularity Vehicle Passport, including the right of access and the relevant rules for the protection of data and the protection of intellectual property rights;

Amendment 161

(e) the location of the data carrier or other identifier enabling access to the Digital Circularity Vehicle Passport of the vehicle. ▌

Proposal for a regulation

When laying down the rules referred to in the first subparagraph, the Commission shall take into account the need to ensure a high level of security and privacy.

Article 7 – paragraph 2

The implementing acts referred to in the first subparagraph shall be adopted in accordance with the examination procedure referred to in Article 52(2).

Amendment 162

Chapter IV Management of end-of-life of vehicles

Proposal for a regulation

Section 1 General provisions

Article 7 – paragraph 4 a (new)

Article 14 Competent authority for management of end-of-life vehicles

Amendment 163

1. Member States shall designate one or more competent authorities to be responsible for the obligations under this Chapter, in particular for monitoring and verifying compliance of economic operators, producers and producer responsibility organisations with their obligations as set out in Articles 15 to 37 and Annex I.

Proposal for a regulation

2. Each Member State may designate one contact point, among the competent authorities referred to in the paragraph 1, for the purpose of communicating with the Commission.

Article 8 – paragraph 1

3. Member States shall lay down the details of the competent authorities’ organisation and operation, including the administrative and procedural rules for:

Amendment 164

(a) the registration of producers in accordance with Article 19;

Proposal for a regulation

(b) the authorisation of producers and producer responsibility organisations in accordance with Article 18;

Article 8 – paragraph 2 – introductory part

(c) the oversight of the implementation of extended producer responsibility obligations in accordance with Articles 16 and 20;

Amendment 165

(d) the collection of data on vehicles and end-of-life vehicles in accordance with Article 19(12) and Article 50(6);

Proposal for a regulation

(e) making information available in accordance with Article 50.

Article 8 – paragraph 2 – point a

4. By … [the last day of the month following 9 months from the date of entry into force of this Regulation], Member States shall notify the Commission of the names and addresses of the competent authorities designated pursuant to paragraph 1. Member States shall inform the Commission without undue delay of any changes to the names or addresses of those competent authorities.

Amendment 166

Article 15 Authorised treatment facilities

Proposal for a regulation

1. Without prejudice to Directive 2010/75/EU, any establishment or undertaking that intends to carry out treatment operations on end-of-life vehicles shall obtain a permit from the competent authority in accordance with Article 23 of Directive 2008/98/EC and shall comply with the conditions laid down in that permit.

Article 8 – paragraph 2 – point b

2. In order to issue a permit referred to in paragraph 1 of this Article, the competent authority shall verify whether the establishment or the undertaking has the capacity that is necessary to comply with the obligations set out in Article 26.

Amendment 167

3. Permits referred to in paragraph 1 of this Article shall indicate that the treatment facilities have the competence to issue a certificate of destruction, as referred to in Article 25.

Proposal for a regulation

By way of derogation from the first subparagraph of this paragraph, Member States may provide under their national legal frameworks that authorised treatment facilities are competent to issue the certificate of destruction referred to in Article 25.

Article 8 – paragraph 3

4. Producers or, where appointed under Article 17(1), producer responsibility organisations may conclude contracts with authorised treatment facilities for the purpose of fulfilling their producer responsibility obligations. Such contracts shall be fair and transparent and shall not contain discriminatory terms or conditions.

Amendment 168

Member States may provide a model contract to facilitate compliance with this Article.

Proposal for a regulation

5. Member States shall ensure that the conditions and the procedures for the granting of the permit are fully coordinated where more than one competent authority or more than one establishment or undertaking intending to carry out treatment operations on end-of-life vehicles is involved in those permit procedures, in order to guarantee an effective integrated approach by all the competent authorities.

Article 8 – paragraph 4

6. The Commission is empowered to adopt an implementing act laying down detailed requirements applicable to the contracts referred to in paragraph 4 of this Article, with a view to ensuring fair, transparent and non-discriminatory terms and conditions. That implementing act shall be adopted in accordance with the examination procedure referred to in Article 52(2).

Amendment 169

Section 2 Extended Producer Responsibility

Proposal for a regulation

Article 16 Extended producer responsibility

Article 8 – paragraph 5

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], producers shall have extended producer responsibility for vehicles that they make available on the market for the first time within the territory of a Member State, including where the vehicle has previously been made available on the market in a Member State other than the Member State within whose territory the vehicle is made available. The extended producer responsibility scheme shall be consistent with Articles 8 and 8a of Directive 2008/98/EC and shall comply with the requirements of this Chapter.

Amendment 170

2. The extended producer responsibility shall include the obligation for producers to ensure that:

Proposal for a regulation

(a) vehicles which they have made available on the market for the first time within the territory of a Member State and which become end-of-life vehicles are:

Article 9 – paragraph 1

(i) collected in accordance with Article 23;

Amendment 171

(ii) treated in accordance with Article 26;

Proposal for a regulation

(b) the waste management operators treating end-of-life vehicles referred to in point (a) meet the targets laid down in Article 33.

Article 9 – paragraph 2

3. In the outermost regions referred to in Article 349 TFEU, Member States may adapt the producers' obligations referred to in paragraphs 1 and 2 of this Article in order to cover the costs of managing end-of-life vehicles and taking into account the characteristics of those regions.

Amendment 172

4. In addition to the information referred to in Article 8a(3), point (e), of Directive 2008/98/EC, producers, in the case of individual fulfilment of extended producer responsibility obligations, or producer responsibility organisations appointed in the case of collective fulfilment of extended producer responsibility obligations, shall publish on their websites once a year, subject to commercial and industrial confidentiality, the information on the collection of end-of-life vehicles and the achievement of targets on reuse and recycling, reuse and recovery and plastic recycling by themselves in the case of individual fulfilment of extended producer responsibility obligations, or by the producers which appointed that producer responsibility organisation in the case of collective fulfilment of extended producer responsibility obligations.

Proposal for a regulation

Article 17 Producer Responsibility Organisations

Article 9 – paragraph 4

1. Producers may choose to fulfil their extended producer responsibility obligations either individually or may appoint a producer responsibility organisation authorised in accordance with Article 18 to fulfil the extended producer responsibility obligations on their behalf.

Amendment 173

Member States may adopt measures to require that producers appoint a producer responsibility organisation to fulfil their extended responsibility obligations on their behalf.

Proposal for a regulation

2. Producer responsibility organisations shall ensure the confidentiality of the data in their possession as regards proprietary information or information directly attributable to individual producers or their authorised representatives for the extended producer responsibility.

Article 9 – paragraph 5

▌

Amendment 174

3. In addition to the information referred to in Article 16(4), producer responsibility organisations shall make publicly available the information on the selection procedure applied in accordance with paragraph 5 of this Article.

Proposal for a regulation

4. Producer responsibility organisations shall ensure regular dialogue between stakeholders pursuant to Article 8a(6) of Directive 2008/98/EC. Waste management operators active in collection and treatment of end-of-life vehicles shall designate observer members to the executive boards of the producer responsibility organisations.

Article 9 – paragraph 7

5. Waste management operators shall be subject to a non-discriminatory selection procedure, based on transparent award criteria, carried out by producers or producer responsibility organisations and which does not place a disproportionate burden on small and medium-sized enterprises.

Amendment 175

Article 18 Authorisation on fulfilment of extended producer responsibility

Proposal for a regulation

1. A producer, in the case of individual fulfilment of extended producer responsibility obligations, and producer responsibility organisations appointed in the case of collective fulfilment of extended producer responsibility obligations, shall apply for an authorisation from the competent authority.

Article 9 – paragraph 8

2. The authorisation shall be granted only where it is demonstrated that the requirements laid down in Article 8a(3), points (a) to (d), of Directive 2008/98/EC are complied with and the measures put in place by the producer or producer responsibility organisation are sufficient to meet the obligations set out in this Chapter with regard to the number of vehicles made available on the market for the first time within the territory of a Member State by the producer or producers on whose behalf the producer responsibility organisation acts.

Amendment 176

Producers, in the case of individual fulfilment of extended producer responsibility obligations, and producer responsibility organisations, in the case of collective fulfilment of extended producer responsibility obligations, may only be registered if they hold an authorisation from the competent authority in accordance with this Article. This is without prejudice to the possibility of combining the registration procedure pursuant to Article 19 and the authorisation procedure pursuant to this Article into a single procedure.

Proposal for a regulation

3. Member States shall, in their measures laying down administrative and procedural rules referred to in Article 14(3), point (b), include the details of the authorisation procedure, which may differ according to whether it relates to individual or collective fulfilment of the extended producer responsibility obligations, and the modalities for verifying compliance of producers and producer responsibility organisations, including the information to be provided by producers or producers responsibility organisations to that end.

Article 10 – paragraph 1 – subparagraph 1 – introductory part

4. The producer or the producer responsibility organisation shall notify the competent authority without undue delay of any changes to the information contained in the authorisation, of any changes that concern the terms of the authorisation or of the permanent cessation of operations.

Amendment 177

5. The self-control mechanism provided for in Article 8a(3), point (d), of Directive 2008/98/EC shall be carried out regularly, and at least every three years, and upon the request by the competent authority, in order to verify that the provisions in that point are complied with and the conditions for authorisation referred to in paragraph 2 of this Article continue to be met. The producer or the producer responsibility organisation shall, upon request, present a self-control report and, where necessary, the draft corrective action plan to the competent authority. Without prejudice to the competencies under paragraph 6 of this Article, the competent authority may make observations on the self-control report and on the draft corrective action plan, and shall communicate any such observations to the producer or the producer responsibility organisation. The producer or producer responsibility organisation shall draw up and implement the corrective action plan based on those observations.

Proposal for a regulation

6. The competent authority may decide to revoke the authorisation if the producer or producer responsibility organisation no longer fulfils the requirements with regard to the organisation of the collection and treatment of end-of-life, fails in relation to reporting to the competent authority, fails to notify the competent authority of any changes that concern the terms of the authorisation, or has ceased operations.

Article 10 – paragraph 1 – subparagraph 1 – point d

Article 19 Registration

Amendment 178

1. By … [the last day of the month following 35 months from the date of entry into force of this Regulation], each Member State shall establish a register of producers, or use an existing register of producers, which shall serve to monitor compliance of producers with the requirements of this Chapter.

Proposal for a regulation

The register shall provide links to other national registers of producers’ websites to facilitate, in all Member States, registration of producers or authorised representatives for the extended producer responsibility and, if available, to the national websites containing information on the registration procedure.

Article 10 – paragraph 1 – subparagraph 1 – point d a (new)

By … [the last day of the month following 35 months from the date of entry into force of this Regulation], the Commission shall establish a website which contains the links to all national registers of producers to facilitate registration in all Member States.

Amendment 179

Member States shall inform the Commission about the links to their national registers of producers within 30 days of the launch of those registers.

Proposal for a regulation

2. Producers shall register in the national register referred to in paragraph 1. They shall to that end submit an application for registration in each Member State where they make a vehicle available on the market for the first time.

Article 10 – paragraph 1 – subparagraph 2

Producers shall submit the application for registration via an electronic data-processing system as referred to in paragraph 8, point (a).

Amendment 180

Producers shall only make available vehicles on the market of a Member State if they or, in case of authorisation, their authorised representatives for the extended producer responsibility, are registered in such Member State.

Proposal for a regulation

3. The application for registration shall include the information listed in Annex IX. Member States may request additional information or documents, as necessary, to use the register of producers in an efficient manner.

Article 10 – paragraph 3

4. By way of derogation from paragraph 3 of this Article, the information referred to in point 1(d) of Annex IX shall be provided either in the application for registration under paragraph 3 of this Article or in the application for authorisation under Article 18.

Amendment 181

5. Where a producer has appointed a producer responsibility organisation in accordance with Article 17(1), the obligations under this Article shall be met by that organisation mutatis mutandis unless otherwise specified by the Member State in which the vehicle has been made available on the market for the first time.

Proposal for a regulation

6. The obligations under this Article may be fulfilled on a producer’s behalf by an authorised representative for the extended producer responsibility.

Article 11 – paragraph 1 – introductory part

If more than one producer is represented in a Member State by one authorised representative, that authorised representative shall provide the name and the contact details for each of the represented producers separately.

Amendment 182

7. Member States may decide that the registration procedure pursuant to this Article and the authorisation procedure pursuant to Article 18 constitute a single procedure, provided that the application for authorisation meets the requirements set out in paragraphs 3 to 6 of this Article.

Proposal for a regulation

8. The competent authority shall:

Article 11 – paragraph 1 – point a

(a) make available on its website information about the application process via an electronic data-processing system;

Amendment 183

(b) grant registrations and provide a registration number within a maximum period of 12 weeks from the moment that all the information required pursuant to paragraphs 2 and 3 is provided.

Proposal for a regulation

9. The competent authority may:

Article 11 – paragraph 1 – point e

(a) lay down modalities with regard to the requirements and process of registration without adding substantive requirements to those laid down pursuant to paragraphs 2 and 3;

Amendment 184

(b) charge cost-based and proportionate fees to producers for the processing of the applications referred to in paragraph 2 of this Article and in Article 18(1).

Proposal for a regulation

10. The competent authority may refuse to register a producer or withdraw the producer’s registration where the information referred to in paragraph 3 of this Article and related documentary evidence are not provided or are not sufficient, or where the producer no longer meets the requirements laid down in point 1(d) of Annex IX.

Article 11 – paragraph 1 a (new)

The competent authority shall withdraw the producer’s registration if the producer has ceased to exist.

Amendment 185

11. The producer, or, where applicable, the producer’s authorised representative for the extended producer responsibility or the producer responsibility organisation appointed on behalf of the producers it represents shall without undue delay notify the competent authority of any changes to the information contained in the registration and of any permanent cessation as regards the making available on the market within the territory of the Member State of the vehicles referred to in the registration.

Proposal for a regulation

12. The producer or, where applicable, the producer’s authorised representative for the extended producer responsibility or the producer responsibility organisation shall report to the competent authority responsible for the register on the performance of extended producer responsibility obligations.

Article 11 – paragraph 2 – subparagraph 1

Where the information in the register of producers is not publicly accessible, Member States shall ensure that providers of online platforms allowing consumers to conclude distance contracts with producers are granted access, free of charge, to that information.

Amendment 186

Article 20 Financial responsibility of producers

Proposal for a regulation

1. The financial contributions paid by the producer shall cover the following costs related to the vehicles that the producer makes available on the market for the first time within the territory of a Member State:

Article 11 – paragraph 2 – subparagraph 2

(a) the costs of the collection of end-of-life vehicles that are necessary to meet the requirements in Articles 23 to 25 and of their subsequent transport in an efficient manner and the costs of the treatment of end-of-life vehicles that are necessary to meet the requirements in Articles 26 to 30, 33 and 35, taking into account the revenues of waste management operators linked to the sales of used spare parts and used spare components, of depolluted end-of-life vehicles, or of secondary raw materials recovered from such parts, components and materials; those costs shall be based on an average cost calculation;

Amendment 187

(b) the costs of conducting awareness raising campaigns aimed to inform the public and to improve collection of end-of-life vehicles;

Proposal for a regulation

(c) the costs of establishing the notification system referred to in Article 25;

Article 11 – paragraph 3

(d) the administrative costs of gathering and making data available and reporting to the competent authorities.

Amendment 188

For vehicles falling within the scope of Directive 2000/53/EC that have been made available on the market before … [the date of entry into force of this Regulation], and by way of derogation from the first subparagraph, point (a), and paragraph 2 of this Article, in Member States where, in accordance with Article 5(4), second subparagraph, of Directive 2000/53/EC, the producers did not have to meet all but only a significant part of the costs, the financial contributions that the producer of those vehicles has to make shall correspond to a level constituting a significant part of the costs referred to therein.

Proposal for a regulation

2. The financial contributions paid by the producers which make available on the market for the first time within the territory of a Member State the vehicle shall also cover costs referred to in paragraph 1, point (a), related to vehicles for which the producer cannot be identified or ceased to exist in the Member State where the vehicle became an end-of-life vehicle, in proportion to their respective share of the market.

Article 12 – paragraph 2

3. The financial contributions paid by the producers making available on the market special purpose vehicles shall cover only the costs referred to in paragraph 1, point (a), that concern collection and depollution of such vehicles.

Amendment 189

4. In the case of individual fulfilment of extended producer responsibility obligations, the producers shall provide a guarantee for vehicles that they make available on the market for the first time in the territory of a Member State. That guarantee shall ensure that the operations referred to in paragraph 1 relating to those vehicles will be financed, including in the event of permanent cessation of their operations or insolvency.

Proposal for a regulation

The amount of the guarantee shall be determined by the Member States in which the vehicle has been made available on the market for the first time taking into account criteria laid down in Article 21.

Article 13 – title

The guarantee may take the form of participation by the producer in appropriate schemes for the financing of the management of end-of-life vehicles, a financial guarantee or equivalent insurance ▌.

Amendment 190

5. When a new vehicle has been type-approved in a multi-stage type-approval, the producer of the base vehicle shall be considered to be the producer of the completed vehicle and may collect pro-rata contributions from the manufacturers of the parts, other than the base vehicle, that have been type approved in the multi-stage type-approval. Those pro-rata contributions shall only cover costs in relation to depollution in accordance with Article 28 and removal of parts and components in accordance with Article 29.

Proposal for a regulation

Microenterprises, as defined in Article 2(3) of the Annex to Commission Recommendation 2003/361/EC, shall be exempted from such contributions.

Article 13 – paragraph 1

6. The competent authority shall, in close cooperation with producers, producer responsibility organisations and waste management operators, monitor:

Amendment 191

(a) the average costs of collection, recycling and treatment operations and the revenues of waste management operators;

Proposal for a regulation

(b) the level of financial contributions to be paid by the producers to the producer responsibility organisations appointed in the case of collective fulfilment of extended producer responsibility obligations so that the costs are fairly allocated between all interested operators.

Article 13 – paragraph 2

Article 21 Fee modulation

Amendment 192

1. In the case of a collective fulfilment of extended producer responsibility obligations, producer responsibility organisations shall ensure that the financial contributions paid to them by producers are modulated by taking into account at least the following:

Proposal for a regulation

(a) the weight of the vehicle, excluding electric vehicle batteries;

Article 13 – paragraph 3

▌

Amendment 193

(b) the rate of recyclability and reusability of the vehicle type to which the vehicle belongs, based on the information submitted to the type-approval authority in accordance with Article 4;

Proposal for a regulation

(c) the time needed to dismantle the vehicle at an authorised treatment facility, especially for parts and components which need to be removed prior to shredding under Article 29;

Article 13 – paragraph 5

(d) the share of materials and substances preventing a high-quality recycling process ▌;

Amendment 194

(e) the percentage of recycled content of materials listed in Articles 6 and 10 used in the vehicle;

Proposal for a regulation

(f) the presence and amount of substances referred to in Article 5(4).

Article 13 – paragraph 6 – subparagraph 1 – introductory part

2. The Commission is empowered to adopt delegated acts in accordance with Article 51 supplementing this Regulation by establishing detailed rules on how the criteria provided for in paragraph 1 of this Article are to be applied.

Amendment 195

Article 22 Cost allocation mechanism for vehicles becoming end-of-life vehicles in another Member State

Proposal for a regulation

1. Notwithstanding Article 16 and Article 20(2), where a vehicle in the categoryM1 or N1 becomes an end-of-life vehicle in a Member State other than the Member State within whose territory the vehicle was placed on the market, and no producer can be identified on the territory of the Member State where it becomes an end-of-life vehicle, the manufacturer of that vehicle ▌ shall ensure that the ▌ costs of waste management operations referred to in Article 20(1), points (a) and (d), incurred by waste management operators ▌ are covered.

Article 13 – paragraph 6 – subparagraph 1 – point a

2. In order to fulfil its obligations under paragraph 1, a manufacturer shall:

Amendment 196

(a) designate by a written mandate an authorised representative for the cross-border mechanism in each Member State and notify the competent authorities about the designations; and

Proposal for a regulation

(b) establish cross-border cooperation mechanisms with the waste management operators carrying out waste management operations referred to in Article 20(1), points (a) and (d).

Article 13 – paragraph 6 – subparagraph 1 – point b – point i

The manufacturer's authorised representative referred to in point (a) of the first subparagraph of this paragraph shall perform the tasks specified in the mandate received from the manufacturer. A manufacturer may designate a producer responsibility organisation to act as its authorised representative.

Amendment 197

Where the manufacturer is established outside of the Union, the manufacturer’s representative in the Union appointed in application of Article 13(4) of Regulation (EU) 2018/858 may fulfil the manufacturer’s obligations under points (a) and (b) of the first subparagraph of this paragraph.

Proposal for a regulation

3. Manufacturers shall demonstrate compliance with the requirements set out in paragraph 2 to their producers.

Article 13 – paragraph 6 – subparagraph 1 – point c a (new)

4. Producers shall make available on the market of a Member State only those vehicles from manufacturers who have demonstrated compliance with the requirements set out in paragraph 2.

Amendment 198

5. The Member State where the vehicle became an end-of-life vehicle shall monitor manufacturers’ and their authorised representatives’ compliance with paragraphs 1 and 2 of this Article. The monitoring shall be based on the information reported and verified by manufacturers and their authorised representatives to the competent authorities on the implementation of paragraphs 1 and 2 of this Article, in particular on the calculation and allocation of costs for the management of end-of-life vehicles referred to in paragraph 1 of this Article, with due regard for business confidentiality and other concerns regarding competitiveness.

Proposal for a regulation

6. Where necessary to ensure compliance with this Article and taking into account information provided by the Member States pursuant to the cooperation and monitoring activities referred to in paragraphs 2 and 5 of this Article, the Commission is empowered to adopt delegated acts in accordance with Article 51 this Regulation. Such acts shall aim, in particular, to avoid a distortion of the single market and to ensure a level playing field for economic operators established within and outside the Union. The delegated acts may lay down detailed rules on the obligations of the manufacturers, in particular those established outside of the Union, the manufacturers’ authorised representatives, producers, Member States and waste management operators and the features of the mechanisms referred to in this Article.

Article 15 – paragraph 3 a (new)

SECTION 3 Collection of end-of-life vehicles

Amendment 199

Article 23 Collection of end-of-life vehicles

Proposal for a regulation

1. Producers shall ensure that all vehicles that they have made available on the market for the first time in the territory of a Member State are collected when those vehicles become end-of-life vehicles.

Article 15 – paragraph 4 a (new)

2. For the purpose of paragraph 1, the producers or, where appointed in accordance with Article 17(1), the producer responsibility organisations shall set up, or participate in the setting up of, collection systems, including collection points ▌.

Amendment 200

Member States shall adopt the necessary measures to ensure that producers or, where appointed in accordance with Article 17(1), producer responsibility organisations set up collection systems for all end-of-life vehicles.

Proposal for a regulation

3. The producers or, where appointed in accordance with Article 17(1), the producer responsibility organisations shall ensure that collection systems referred to in paragraph 2 of this Article:

Article 16 – paragraph 1

(a) cover the whole territory of the Member State;

Amendment 201

(b) are provided with adequate availability of authorised treatment facilities or collection points, taking into account population size and density, expected volume of end-of-life vehicles, not being limited to areas where the collection and subsequent management is most profitable;

Proposal for a regulation

(c) ensure collection of waste parts from repairs of vehicles;

Article 17 – paragraph 1 – subparagraph 1

(d) enable collection of end-of-life vehicles ▌, irrespective of their origin;

Amendment 202

(e) enable the delivery of all end-of-life vehicles free of charge to collection points or authorised treatment facilities as provided in Article 24(2).

Proposal for a regulation

4. Producers or, where appointed in accordance with Article 17(1), producer responsibility organisations shall publish and regularly update the list of collection points and authorised treatment facilities on their websites and carry out educational campaigns promoting the collection systems for end-of-life vehicles and informing about environmental consequences of improper collection and handling of end-of-life vehicles. Member States may require that the educational campaigns be coordinated within the Member State, in collaboration with both the producers or, where appointed in accordance with Article 17(1), producer responsibility organisations and the competent authorities.

Article 17 – paragraph 1 – subparagraph 2

5. Member States may authorise collection points other than authorised treatment facilities to collect end-of-life vehicles.

Amendment 203

▌

Proposal for a regulation

The collection points shall obtain a permit from the competent authority in accordance with Article 23 of Directive 2008/98/EC and shall comply with the conditions laid down in that permit. In order to issue a permit, the competent authority shall verify that such establishment or undertaking has the capacity necessary to carry out the following obligations:

Article 17 – paragraph 1 – subparagraph 2 a (new)

(a) collect end-of-life vehicles and temporarily store them in accordance with Part A of Annex VIII;

Amendment 204

(b) prepare for the transfer of the collected end-of-life vehicles to authorised treatment facilities by preventing the accidental leakage of fluids and unauthorised access to the collection point;

Proposal for a regulation

▌

Article 17 – paragraph 2 – subparagraph 3

(c) guarantee that all collected end-of-life vehicles are transferred to an authorised treatment facility within two months of their receipt .

Amendment 205

▌

Proposal for a regulation

6. The collection points shall issue a document in electronic format, confirming receipt of the end-of-life vehicle, to the vehicle owner, and provide it through an electronic notification procedure established in accordance with Article 25(2) to the relevant authorities of the Member State, including the competent authorities designated under Article 14.

Article 17 – paragraph 6

▌

Amendment 206

Article 24 Delivery of end-of-life vehicles

Proposal for a regulation

1. A vehicle owner, and any economic operator acting on behalf of the vehicle owner, of a vehicle that becomes an end-of-life vehicle shall deliver it to an authorised treatment facility or to a collection point without undue delay. That obligation shall not apply to motor caravans, as referred to in Part A, point 5.1, of Annex I to Regulation (EU) 2018/858, that have become end-of-life vehicles as long as those vehicles are used for housing purposes.

Article 17 – paragraph 11

All end-of-life vehicles for which no owner can be identified shall be delivered for treatment to authorised treatment facilities.

Amendment 207

2. Delivery of an end-of-life vehicle to an authorised treatment facility or a collection point shall be free of charge for the last owner of a vehicle unless the end-of-life vehicle lacks any of the essential vehicle parts or components ▌ or contains waste which has been added to the end-of-life vehicle.

Proposal for a regulation

3. Essential parts for the purposes of this Article are in particular:

Article 17 – paragraph 12

(a) e-drive motors;

Amendment 208

(b) electric vehicle batteries;

Proposal for a regulation

(c) engines;

Article 18 – paragraph 2

(d) multiple large pieces of bodywork.

Amendment 209

4. Where the electric vehicle battery is missing from an end-of-life vehicle, the delivery of the end-of-life vehicle shall remain free of charge if the last owner of the vehicle provides documentation which proves that the electric vehicle battery has been handled by a professional operator in accordance with Regulation (EU) 2023/1542.

Proposal for a regulation

5. In the case of vehicles that have been declared as technical total losses by insurance companies, delivery of such end-of-life vehicles shall be free of charge notwithstanding that the essential parts set out in paragraph 2 are missing.

Article 18 – paragraph 3

Article 25 Certificate of destruction

Amendment 210

1. Authorised treatment facilities shall issue a certificate of destruction to the last vehicle owner upon delivery of the end-of-life vehicle to the authorised treatment facility. The certificate of destruction shall be issued in accordance with the template set out in Annex X.

Proposal for a regulation

2. The certificate of destruction shall be issued in an electronic format and provided through an electronic notification procedure to the relevant authorities of the Member State, including the competent authorities designated under Article 14. The authorised treatment facility shall provide a copy of the electronic notification to the last vehicle owner and any economic operator acting on behalf of the vehicle owner.

Article 18 – paragraph 3 a (new)

3. Where the end-of-life vehicle, for which a certificate of destruction has been issued in a Member State, is registered in another Member State, the relevant authorities designated by the Member State where the certificate of destruction was issued shall inform the relevant authorities designated by the Member State where the vehicle is registered that a certificate of destruction has been issued for the vehicle in question.

Amendment 211

4. The relevant vehicle registration authorities shall cancel the registration of an end-of-life vehicle only after receiving the certificate of destruction for that vehicle.

Proposal for a regulation

5. Certificates of destruction issued in a Member State shall be recognised in all other Member States.

Article 18 – paragraph 4

▌

Amendment 212

Section 4 Treatment of end-of-life vehicles

Proposal for a regulation

Article 26 Obligations for authorised treatment facilities

Article 18 – paragraph 4 a (new)

1. Authorised treatment facilities shall ensure that all end-of-life vehicles and their parts, components and materials, as well as waste parts from repairs of vehicles, are accepted and treated in compliance with the conditions set out in their permits, as well as in accordance with this Regulation. The treatment of the end-of-life vehicles may be carried out individually by one authorised treatment facility or, except for depollution, in cooperation with other authorised treatment facilities.

Amendment 213

▌

Proposal for a regulation

2. Authorised treatment facilities shall:

Article 20 – paragraph 1 – point a

(a) store, even temporarily, all end-of-life vehicles and their parts, components and materials in compliance with the minimum requirements set out in Part A of Annex VIII;

Amendment 214

(b) depollute all end-of-life vehicles, in compliance with Article 28 and the minimum requirements set out in Part B of Annex VIII;

Proposal for a regulation

(c) remove the parts and components listed in Part C of Annex VIII from the end-of-life vehicle in compliance with Articles 29 and 30;

Article 20 – paragraph 1 – point b

(d) treat all end-of-life vehicles and their parts, components and materials in accordance with Articles 27 to 31, 33, 34 and 35 of this Regulation and Annex VIII thereto, the waste hierarchy and the general requirements laid down in Article 4 of Directive 2008/98/EC;

Amendment 215

(e) apply the best available techniques as defined in Article 3, point (10), of Directive 2010/75/EU, where applicable;

Proposal for a regulation

▌

Article 20 – paragraph 1 – point c

(f) treat the received end-of-life vehicle within 12 months of the delivery date.

Amendment 216

In addition to the requirements set out in Article 35 of Directive 2008/98/EC, the authorised treatment facilities shall electronically store the record of all the treatment operations performed, referred to in points (a) to (e) of the first subparagraph of this paragraph, of end-of-life vehicles for three years, and be able to present this information, upon request by relevant national authorities.

Proposal for a regulation

3. The Commission is empowered to adopt delegated acts in accordance with Article 51 to amend Annex VIII by adapting the minimum treatment requirements for end-of-life vehicles to scientific and technical progress in treatment technologies, including:

Article 20 – paragraph 1 – point d

(a) adding, deleting or revising the parts and components listed in Part C of Annex VIII;

Amendment 217

(b) revising the target values for the output fractions listed in Part G, point 2, of Annex VIII;

Proposal for a regulation

(c) expanding the list of aluminium alloy types listed in Part G, points 2(b) and (c), of Annex VIII;

Article 20 – paragraph 1 – point d a (new)

(d) adding quality requirements to enhance the separation of recyclable plastics and target values for subsequent recycling technologies applicable to Part G, point 2, of Annex VIII.

Amendment 218

4. Member States shall encourage authorised treatment facilities to introduce certified environmental management systems and to have audits conducted in accordance with Regulation (EC) No 1221/2009.

Proposal for a regulation

Article 27 General requirements for shredding

Article 20 – paragraph 4 – subparagraph 1

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], authorised treatment facilities and other waste management operators carrying out shredding operations shall request that endoflife vehicles delivered to them for shredding, or large structural parts and components from the chassis or bodywork from end-of-life vehicles of categories N2, N3, M2, M3 and O delivered to them for shredding or cutting are:

Amendment 219

(a) depolluted in accordance with Article 28 and their parts and components removed in accordance with Article 29; and

Proposal for a regulation

(b) accompanied by a copy of the certificate of destruction that has been issued for the end-of-life vehicle concerned.

Article 21 – paragraph 1 – introductory part

2. Authorised treatment facilities and waste management operators carrying out shredding operations and receiving end-of-life vehicles which do not comply with the requirements set out in paragraph 1 shall:

Amendment 220

(a) report the non-compliance to the competent authority, including the name and contact details of the natural or legal person who delivered the end-of-life vehicle to the authorised treatment facility or other waste management operator for shredding;

Proposal for a regulation

(b) refrain from using those end-of-life vehicles in their shredding operations unless the competent authority authorises such operations or until the necessary steps to treat the end-of-life vehicle in accordance with Articles 28 and 29 and to issue a certificate of destruction in accordance with Article 25 have been taken.

Article 21 – paragraph 1 – point a

3. Authorised treatment facilities and waste management operators conducting shredding of end-of-life vehicles shall only be allowed to mix end-of-life vehicles, their parts, components and materials with other waste, including packaging waste and waste electrical and electronic equipment, if the criteria and limit values of Part G, points 1 and 2, of Annex VIII are met.

Amendment 221

▌

Proposal for a regulation

Article 28 Depollution of end-of-life vehicles

Article 21 – paragraph 1 – point b

1. Within 30 days of delivery of an end-of-life vehicle to the authorised treatment facility, that facility shall depollute that vehicle before it is further treated, in compliance with the minimum requirements set out in Part B of Annex VIII.

Amendment 222

2. The fluids and liquids listed in Part B of Annex VIII shall be separately collected and stored, in accordance with the requirements set out in Part A of Annex VIII. Waste oils shall be collected and stored separately from the other fluids and liquids and be treated in accordance with Article 21 of Directive 2008/98/EC.

Proposal for a regulation

3. The parts, components and materials containing substances referred to in Article 5(4) of this Regulation shall be removed from the end-of-life vehicles, and handled in accordance with Article 17 of Directive 2008/98/EC.

Article 21 – paragraph 1 – point e

4. The batteries shall be separately removed from end-of-life vehicles and stored in a designated area for further treatment in accordance with Article 70(3) of Regulation (EU) 2023/1542.

Amendment 223

5. The parts, components and materials, that have been depolluted, shall be handled and labelled in accordance with Articles 18 and 19 of Directive 2008/98/EC.

Proposal for a regulation

6. The authorised treatment facility shall document the depollution of end-of-life vehicles, by recording the information listed in Part B, point 4, of Annex VIII and report that information for each calendar year to the competent authority of the Member State.

Article 22 – paragraph 2 – point a

Article 29 Mandatory removal of parts and components for reuse, remanufacturing, refurbishment and recycling prior to shredding

Amendment 224

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], authorised treatment facilities shall ensure that the parts and components listed in Part C of Annex VIII, are removed from an endoflife vehicle, prior to shredding or compacting, after the depollution operations referred to in Article 28 have been completed.

Proposal for a regulation

Authorised treatment facilities shall remove parts and components listed in Part C of Annex VIII with a reuse, remanufacturing or refurbishment potential in a non-destructive manner.

Article 22 – paragraph 2 – subparagraph 1 a (new)

The second subparagraph of this Article shall not apply if an authorised treatment facility demonstrates that the manual dismantling, semi-automated or automated disassembly in a non-destructive way of parts and components listed in Part C of Annex VIII entails disproportionate economic costs that cannot be compensated by the revenues expected from the reuse, remanufacturing or refurbishment of those parts and components.

Amendment 225

▌

Proposal for a regulation

2. An authorised treatment facility shall not be required to remove parts and components listed in Part C of Annex VIII, with the exception of those that are to be removed in a non-destructive manner in accordance with paragraph 1 of this Article, if it demonstrates that post-shredder technologies separate materials from parts and components designated in the second column of Part C ▌ of Annex VIII as efficiently as manual dismantling processes, semi-automated or automated disassembly processes and that the criteria and limit values of Part G, points 1 and(2, of Annex VIII are met.

Article 23 – paragraph 1 – subparagraph -1 (new)

For the purposes of the first subparagraph, the authorised treatment facility shall provide the information listed in Part G, point 3, of Annex VIII.

Amendment 226

3. In addition to the obligations set out in Article 35 of Directive 2008/98/EC, the authorised treatment facilities shall maintain records of the end-of-life vehicles that are processed without the prior removal of parts, components and materials in accordance with paragraph 2 of this Article, including the name and address of the treatment facilities, and the VIN of the end-of-life vehicles concerned.

Proposal for a regulation

The authorised treatment facilities shall provide the information in the records referred to in the first subparagraph to the competent authority in accordance with Article 50(6).

Article 23 – paragraph 1 – subparagraph 1

Article 30 Requirements concerning the removed parts and components

Amendment 227

1. All parts and components that have been removed from an end-of-life vehicle pursuant to Article 29(1) shall be assessed to determine whether they are fit for:

Proposal for a regulation

(a) reuse, in accordance with Part D, point 1(a), of Annex VIII;

Article 23 – paragraph 2 – point b

(b) remanufacturing or refurbishment, in accordance with Part D, point 1(b), of Annex VIII;

Amendment 228

(c) recycling; or

Proposal for a regulation

(d) other treatment operations, taking into account the specific treatment requirements in Part F of Annex VIII

Article 23 – paragraph 2 – point c

▌

Amendment 229

The assessment shall be carried out taking into account in particular the technical feasibility of conducting the processes referred to in the first subparagraph and vehicle safety requirements.

Proposal for a regulation

▌

Article 23 – paragraph 2 – point d

2. The removed parts and components fit for reuse, remanufacturing or refurbishment shall be:

Amendment 230

(a) labelled in compliance with Part D, point 2, of Annex VIII; and

Proposal for a regulation

▌

Article 23 – paragraph 2 – point e

(b) protected appropriately against damage during transportation, loading and unloading.

Amendment 231

▌

Proposal for a regulation

3. The parts and components listed in Part E of Annex VIII shall not be reused unless the assessment referred to in paragraph 1 confirms that the use of those parts and components complies with the applicable vehicle requirements as set out in Regulations (EU) 2018/858 and (EU) No 168/2013. Those parts and components may only be transferred to another economic operator for reuse if they are to be installed by a qualified repair and maintenance operator.

Article 23 – paragraph 3

4. The parts and components from end-of-life vehicles or repair and maintenance operations that are assessed as fit for reuse, remanufacturing or refurbishment shall not be considered waste. Authorised treatment facilities shall make available, upon request, to the relevant national authorities:

Amendment 232

(a) documentation confirming the assessment referred to in paragraph 1 demonstrating that the parts and components are fit for the purposes of reuse, remanufacturing or refurbishment; and

Proposal for a regulation

(b) a copy of the invoice or contract related to the transfer of those parts and components.

Article 23 – paragraph 4 – subparagraph 1

5. This Article shall not apply to batteries to which Regulation (EU) 2023/1542 applies.

Amendment 233

6. Authorised treatment facilities shall ensure that removed parts and components, which are not fit for reuse, remanufacturing or refurbishment, are sent for treatment in accordance with paragraph 1, first subparagraph, points (c) and (d).

Proposal for a regulation

Article 31 Trade of used, remanufactured or refurbished parts and components

Article 23 – paragraph 4 – subparagraph 2 – point b a (new)

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], any economic operator selling used, remanufactured or refurbished spare parts and components shall ▌ensure that parts and components contain the labelling placed by authorised treatment facilities in accordance with Article 30(2), point (a).

Amendment 234

▌

Proposal for a regulation

2. In the case of sale of used, remanufactured or refurbished parts and components to consumers, the economic operators shall ensure that those parts and components are able to maintain their required functions and performance through normal use and comply with other requirements applicable to the goods sold in accordance with Directive (EU) 2019/771.

Article 23 – paragraph 4 – subparagraph 2 – point b b (new)

▌

Amendment 235

3. The requirements on economic operators in paragraphs 1 and 2 shall apply irrespective of the trading technique used, including online sales.

Proposal for a regulation

Article 32 Reuse, remanufacturing and refurbishment of parts and components

Article 23 – paragraph 4 – subparagraph 2 – point c

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], Member States shall incentivise the reuse, remanufacturing, retrofitting and refurbishment of parts and components, whether removed during the use or end-of-life phase of a vehicle.

Amendment 236

The incentives referred to in the first subparagraph ▌ may include:

Proposal for a regulation

(a) a requirement for maintenance and repair operators to offer customers to repair a vehicle with used, remanufactured or refurbished spare parts and components alongside the offer to repair the vehicle with new parts and components, provided that such a requirement is formulated not to create excessive costs or administrative burdens for micro- and small enterprises;

Article 23 – paragraph 5

(b) economic incentives designed to stimulate the market for used, remanufactured or refurbished spare parts and components. ▌

Amendment 237

2. Member States shall include in the waste prevention programmes required pursuant to Article 29 of Directive 2008/98/EC the incentives referred to in paragraph 1 of this Article.

Proposal for a regulation

3. The Commission shall facilitate the exchange of information and sharing of best practices among Member States on the incentives referred to in paragraph 1.

Article 23 – paragraph 5 a (new)

The Commission shall monitor the effectiveness of the incentives given by Member States.

Amendment 238

Article 33 Reuse, recycling and recovery targets

Proposal for a regulation

1. From … [the first day of the calendar year following 36 months from the date of entry into force of the Regulation], Member States shall adopt the necessary measures to ensure that the producers or, where appointed in accordance with Article 17(1), producer responsibility organisations ensure that waste management operators achieve the following targets:

Article 24 – paragraph 2

(a) the reuse and recovery, as calculated together, is a minimum of 95 %, by average weight per vehicle, excluding batteries, and year;

Amendment 239

(b) the reuse and recycling, as calculated together, is a minimum of 85 %, by average weight per vehicle, excluding batteries, and year.

Proposal for a regulation

2. From … [the first day of the calendar year following 60 months from the date of entry into force of the Regulation], Member States shall adopt the necessary measures to ensure that producers or, where appointed in accordance with Article 17(1), producer responsibility organisations ensure that a yearly target for the recycling of plastics of at least 30 % of the total average weight of plastics contained in the end-of-life vehicles is met by the waste management operators.

Article 24 – paragraph 2 a (new)

The weight of the plastic recycled and the total weight of plastics referred to in the first subparagraph shall exclude elastomers, thermosets other than polyurethane foams used for cushioning, and plastics that contain or are contaminated by any substance referred to in Article 7 of Regulation (EU) 2019/1021 when the thresholds of Annex IV to that Regulation are exceeded.

Amendment 240

Article 34 Ban on landfilling of non-inert waste

Proposal for a regulation

From … [the first day of the month following 36 months from the date of entry into force of this Regulation], the shredder heavy and shredder light fractions from end-of-life vehicles remaining after treatment containing non-inert waste shall not be accepted in a landfill if they exceed the limit values set out in Part G, points 2(d) and 2(e), of Annex VIII.

Article 25 – paragraph 5 a (new)

Article 35 Shipments of end-of-life vehicles

Amendment 241

1. Treatment of end-of-life vehicles may be undertaken outside the Member State concerned or outside the Union, provided that the shipment of end-of-life vehicles or waste produced in the process of their treatment is in compliance with Regulation (EU) 2024/1157.

Proposal for a regulation

▌

Article 26 – paragraph 1 – point a

2. Shipments of end-of-life vehicles from the Union to a third country in accordance with paragraph 1 of this Article shall only count towards the fulfilment of obligations and targets set out in Article 33 if the exporter of the end-of-life vehicles provides documentary evidence approved by the competent authority of destination demonstrating that the treatment took place in conditions that are considered equivalent to the requirements laid down in this Regulation and to environmental and human health protection requirements laid down in other Union legislation.

Amendment 242

▌

Proposal for a regulation

Chapter V Transfer of ownership and distinction between used vehicles and end-of-life vehicles

Article 26 – paragraph 1 – point b

Article 36 Transfer of ownership of used vehicles within the Union

Amendment 243

1. For the purpose of transferring ownership of a used vehicle within the Union, an economic operator shall present to any natural or legal person interested in acquiring ownership of the vehicle concerned the documentation demonstrating that it is not an endoflife vehicle, irrespective of the trading technique used, including by means of dedicated auctions for economic operators, distance contracts or online platforms. That documentation shall demonstrate that it is a roadworthy vehicle or shall consist of an assessment in accordance with Annex I proving that it is not an end-of-life vehicle.

Proposal for a regulation

2. For the purpose of transferring ownership of a used vehicle within the Union, natural persons who are not economic operators shall only be required to provide the documentation referred to in paragraph 1 where:

Article 26 – paragraph 1 – subparagraph 1 a (new)

(a) the vehicle is declared a total economic loss by an insurance company;

Amendment 244

(b) the sale is concluded entirely by means of an online platform, without physical handover of the vehicle between the seller and the buyer or any person acting on their behalf.

Proposal for a regulation

Article 37 Status of the vehicle

Article 26 – paragraph 1 – subparagraph 1 b (new)

1. When assessing damage to a vehicle involved in an accident, the insurance company or any other automotive expert carrying out the assessment on its behalf shall also assess whether the vehicle is an end-of-life vehicle in accordance with Annex I.

Amendment 245

2. The competent authorities may require a vehicle owner, where there is doubt that a used vehicle is an end-of-life vehicle, to present documentation that the vehicle concerned is not an end-of-life vehicle. That documentation shall consist of an assessment in accordance with Annex I or a valid roadworthiness certificate.

Proposal for a regulation

3. The Commission is empowered to adopt delegated acts, in accordance with Article 51 of this Regulation, to amend this Regulation by removing the criteria listed in Annex I to determine whether a used vehicle is an end-of-life vehicle, provided that technological progress in the area of traceability, repairability and safety justifies limiting the instances where the vehicle shall be considered an end-of-life vehicle.

Article 27 – paragraph 2

Chapter VI Export of used vehicles to third countries

Amendment 246

Article 38 Competent authority for export of used vehicles to third countries

Proposal for a regulation

1. Member States shall designate one or more competent authorities responsible for the obligations laid down in this Chapter.

Article 27 – paragraph 3 – subparagraph 1 – point c

2. By … [the last day of the month following 12 months from the date of entry into force of this Regulation], Member States shall notify the Commission of the names and addresses of the competent authorities designated pursuant to paragraph 1. Member States shall inform the Commission without undue delay of any changes to the names or addresses of those competent authorities.

Amendment 247

Article 39 Controls and requirements on the export of used vehicles

Proposal for a regulation

1. From … [the first day of the month following 60 months from the date of entry into force of this Regulation], used vehicles to be exported shall be subject to the controls and requirements laid down in this Chapter.

Article 27 – paragraph 3 – subparagraph 1 – point d

2. This Chapter is without prejudice to other provisions of this Regulation as well as to other Union legal acts governing the release for export of goods, in particular Regulation (EU) No 952/2013 and its Articles 46, 47, 267 and 269.

Amendment 248

3. Used vehicles may be exported only if they are:

Proposal for a regulation

(a) not end-of-life vehicles; and

Article 27 – paragraph 3 – subparagraph 1 – point d a (new)

(b) ▌ roadworthy at the date of lodging the export declaration, unless they have been recognised as vehicles of special cultural interest in accordance with Article 2(2), point (f), and Annex II.

Amendment 249

4. The following information shall be provided or made available to customs authorities for each used vehicle to be exported:

Proposal for a regulation

(a) the VIN of the used vehicle and the identification of the Member State where the vehicle was last registered;

Article 27 – paragraph 3 – subparagraph 1 – point d b (new)

(b) a statement confirming that the used vehicle fulfils the requirements set out in paragraph 3 of this Article, or a certificate is provided as referred to in Annex II.

Amendment 250

5. In order to verify compliance with this Chapter on allowing a used vehicle to be released for export:

Proposal for a regulation

(a) until the interconnection referred to in Article 46(4) is operational, customs authorities shall exchange information and cooperate with competent authorities in accordance with Article 45, and, where necessary, shall take into account such exchange of information and cooperation in order to allow a used vehicle to be released for export;

Article 27 – paragraph 4

(b) once the interconnection referred to in Article 46(4) is operational, Article 40, Article 41(2) and (3) and Article 43(3) shall apply, and notifications and other exchanges under Articles 42, 43 and 44 shall take place by means of those electronic systems.

Amendment 251

6. A used vehicle to be exported shall not be subject:

Proposal for a regulation

▌

Article 27 – paragraph 5

(a) to an entry in the declarant’s records pursuant to Article 182 of Regulation (EU) No 952/2013;

Amendment 252

(b) to self-assessment pursuant to Article 185 of Regulation (EU) No 952/2013.

Proposal for a regulation

▌

Article 28 – paragraph 1 – introductory part

Article 40 Automated verification of the information on vehicle status

Amendment 253

1. Before releasing a used vehicle for export, customs authorities shall verify electronically and automatically via the electronic systems referred to in Article 46(4) if, based on the VIN and the information on the Member State of last registration, the vehicle is roadworthy. That obligation shall not apply with respect to vehicles which have been recognised as vehicles of special cultural interest in accordance with Article 2(2), point (f), and Annex II.

Proposal for a regulation

2. Where the information provided or made available to customs authorities does not correspond to the information in the national vehicle registers and national electronic systems on roadworthiness pursuant to paragraph 1, customs authorities shall not release that vehicle for export and shall inform the natural or legal person concerned thereof through those systems.

Article 28 – paragraph 3

Article 41 Risk management and customs controls

Amendment 254

1. For the purpose of enforcing the provisions laid down in Article 39, customs authorities shall carry out controls on used vehicles to be exported in accordance with the provisions on risk management and customs controls laid down under Regulation (EU) No 952/2013. Without prejudice to Article 40 of this Regulation, such controls shall primarily be based on risk analysis, as established in Regulation (EU) No 952/2013.

Proposal for a regulation

2. In addition to the risk management referred to in paragraph 1 of this Article, once the interconnection referred to in Article 46 is operational, the electronic systems referred to in Article 46(1) shall contain the information and the customs authorities shall automatically and electronically verify through the interconnection referred to in Article 46(4) whether a used vehicle to be exported complies with specific conditions linked to the protection of the environment or road safety in accordance with paragraph 3 of this Article.

Article 28 – paragraph 3 a (new)

3. The Commission is empowered to adopt delegated acts in accordance with Article 51 to supplement this Regulation by setting out the compliance conditions referred to in paragraph 2 of this Article in relation to the specific conditions applied to the import of used vehicles by the third country of import linked to the protection of the environment and road safety, when such conditions have been notified by that third country to the Commission. Those conditions shall be verifiable against the information available in the electronic systems referred to in Article 46(1).

Amendment 255

4. The Commission shall publish and regularly update in a dedicated online portal the specific conditions notified to it that are linked to the protection of the environment or road safety imposed by third countries referred to in paragraph 3.

Proposal for a regulation

Article 42 Suspension

Article 28 – paragraph 3 b (new)

1. Where there are reasonable grounds to believe that a used vehicle to be exported may not comply with the requirements of this Chapter, the customs authorities shall immediately suspend the release for export of that used vehicle, immediately notify the competent authorities designated under Article 38 of the suspension and transmit all relevant information needed for the competent authorities to determine whether the used vehicle complies with the requirements of this Regulation and may be released for export.

Amendment 256

2. For the purpose of determining whether a used vehicle, subject to suspension as referred to in paragraph 1, complies with this Regulation, the competent authorities may request, from any person involved in the export of that used vehicle, additional information, including information on the sale or transfer of vehicle ownership, such as a copy of the invoice or contract, and documentary evidence that that used vehicle is destined for further use.

Proposal for a regulation

Article 43 Release for export

Article 29 – paragraph 1

1. Where the release for export of a used vehicle has been suspended in accordance with Article 42, that used vehicle shall be released for export when all the other requirements and formalities relating to such release have been fulfilled and when any of the following conditions is satisfied:

Amendment 257

(a) the competent authorities designated under Article 38 have not requested, within four working days from the beginning of the suspension, the customs authorities to maintain the suspension; or

Proposal for a regulation

(b) the competent authorities designated under Article 38 have informed the customs authorities of their approval for release for export pursuant to this Chapter.

Article 29 – paragraph 2

2. The release for export shall not be deemed proof of compliance with Union law and, in particular, with this Regulation or Regulation (EU) No 952/2013.

Amendment 258

3. Customs authorities shall automatically notify the exit of the vehicle from the Union through the interconnection referred to in Article 46(4) to the vehicle registration authority of the Member State of last registration. The vehicle registration authority shall record in its national vehicle register that the vehicle was exported to a third country.

Proposal for a regulation

Article 44 Refusal to release for export

Article 30 – title

1. Where the competent authority concludes that a used vehicle for which the suspension has been notified in accordance with Article 42 does not comply with this Chapter, the competent authority shall immediately require the customs authorities not to release it for export and notify them thereof.

Amendment 259

2. Upon the notification from the competent authority pursuant to paragraph 1, the customs authorities shall not release the used vehicle for export.

Proposal for a regulation

▌

Article 30 – paragraph 1

Article 45 Cooperation among authorities and exchange of information

Amendment 260

1. Competent authorities of Member States shall mutually assist one another in the implementation of this Chapter through exchange of information at bilateral level, in particular for the purpose of verifying the status of a vehicle, including the verification of its registration status in the Member State in which it was previously registered.

Proposal for a regulation

2. Where appropriate, competent authorities of Member States shall also cooperate with administrative authorities from third countries. Such cooperation may include sharing of relevant information, conducting joint inspections, and other forms of mutual assistance as deemed necessary to ensure compliance with applicable laws and regulations governing the export of used vehicles.

Article 30 – paragraph 1 a (new)

3. Customs authorities and competent authorities of Member States shall cooperate in accordance with Article 47(2) of Regulation (EU) No 952/2013 and exchange information necessary for the fulfilment of their functions under this Regulation, including via electronic means. The customs authorities may communicate, in accordance with Article 12(1) and Article 16(1) of Regulation (EU) No 952/2013, confidential information acquired by the customs authorities in the course of performing their duties, or provided to the customs authorities on a confidential basis, to the competent authority of the Member State where the operator or trader is established.

Amendment 261

4. Where competent authorities have received information in accordance with paragraphs 1 to 3, those competent authorities may communicate that information to competent authorities from other Member States.

Proposal for a regulation

5. Risk-related information shall be exchanged as follows:

Article 30 – paragraph 2 – subparagraph 1

(a) between customs authorities in accordance with Article 46(5) of Regulation (EU) No 952/2013;

Amendment 262

(b) between customs authorities and the Commission in accordance with Article 47(2) of Regulation (EU) No 952/2013;

Proposal for a regulation

(c) between customs authorities and competent authorities, including competent authorities from other Member States, in accordance with Article 47(2) of Regulation (EU) No 952/2013.

Article 30 – paragraph 2 – subparagraph 2

Article 46 Electronic systems

Amendment 263

1. The MOVE-HUB electronic system developed by the Commission shall be used for the exchange of the VIN and other information on the vehicle registration and roadworthiness status between the national vehicle registers and electronic systems on roadworthiness of the Member States, as well as, to interconnect to the EU Single Window Environment for Customs, where necessary for the controls and requirements laid down in this Chapter.

Proposal for a regulation

2. The MOVE-HUB electronic system referred to in paragraph 1 shall provide at least the following functionalities:

Article 31 – paragraph 1 – subparagraph 2 a (new)

(a) to exchange the data in real-time with the national vehicle registers and national electronic systems on roadworthiness of the Member States interconnected with it;

Amendment 264

(b) to enable an automated electronic check of data provided in a roadworthiness certificate as referred to in Annex II to Directive 2014/45/EU, of the date of first registration of a vehicle, as well as of the Member State where a vehicle was last registered, as referred to in Directive 1999/37/EC, to determine whether a used vehicle to be exported complies with the requirements laid down in Article 39, Article 40(1) and Article 41;

Proposal for a regulation

(c) to interconnect to the EU Single Window Environment for Customs in accordance with Regulation (EU) 2022/2399 for the purpose of exchanging data, and support the process of exchanging information referred to in Articles 40(1) and Article 41(2), as well as support the notifications referred to in Articles 42, 43 and 44;

Article 32 – paragraph 1 – introductory part

(d) for the purposes of cooperation with third countries under Article 45(2), to allow the electronic exchange of information with the competent authorities of third countries which have notified to the Commission pursuant to Article 41(2) the specific conditions for the import of used vehicles that they apply.

Amendment 265

3. Member States shall interconnect their national vehicle registers and national electronic systems on roadworthiness with the MOVE-HUB electronic system referred to in paragraph 1. That interconnection shall be operational within two years following the adoption of the implementing act referred to in paragraph 5.

Proposal for a regulation

▌

Article 32 – paragraph 1 – point b a (new)

4. The Commission shall interconnect the MOVE-HUB system referred to in paragraph 1 of this Article with the European Union Customs Single Window Certificates Exchange System established in Article 4 of Regulation (EU) 2022/2399, so that the automated controls referred to in Article 40 and Article 41(2) and the notifications referred to in Articles 42, 43 and 44 can be performed. That interconnection shall be operational within four years following the adoption of the implementing act referred to in paragraph 5 of this Article.

Amendment 266

5. The Commission shall, by … [the last day of the month following [24] months from the date of entry into force of this Regulation], adopt the implementing acts laying down the necessary arrangements for the implementation of the functionalities of the MOVE-HUB referred to in paragraph 2, including the technical measures necessary for the interconnection of national electronic systems with the MOVE-HUB, the conditions of connection to MOVE-HUB, the data to be transmitted by the national systems and the format for the transmission of that data through the interconnected national systems. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 52(2).

Proposal for a regulation

Chapter VII Enforcement

Article 32 – paragraph 1 1 a (new)

▌

Amendment 267

Article 47 Inspections

Proposal for a regulation

1. Member States shall, for the purpose of enforcing this Regulation, establish inspection strategies aimed at detecting illegal activities in the area of collection, and treatment and export of end-of-life vehicles and their parts and components. Those strategies shall provide for the inspections referred to in paragraphs 2, 3 and 4.

Article 33 – paragraph 1 – subparagraph 1

2. Member States shall, for the purpose of enforcing this Regulation, inspect:

Amendment 268

(a) authorised treatment facilities;

Proposal for a regulation

(b) collection points;

Article 33 – paragraph 1 – subparagraph 2 – point b

▌

Amendment 269

(c) other facilities and economic operators which might be involved in the collection, treatment and export of end-of-life vehicles, or selling used spare parts and components.

Proposal for a regulation

3. The total number of operators listed in paragraph 2 that shall be subject to inspection each calendar year shall be calculated as being at least 10 % of the operators listed in paragraph 2, points (a) and (b).

Article 33 – paragraph 1 – subparagraph 2 a (new)

4. Member States shall also carry out regular and risk-based inspections concerning export of used vehicles in order to verify compliance with Article 39.

Amendment 270

▌

Proposal for a regulation

5. In order to distinguish between used vehicles and end-of-life vehicles, competent authorities of Member States may inspect shipments of used vehicles suspected to be end-of-life vehicles on compliance with the requirements laid down in Article 36 and Annex I and monitor such shipments accordingly.

Article 34 – paragraph 1 – introductory part

6. Where the competent authorities of a Member State establish that an intended shipment of a used vehicle involves one or more end-of-life vehicles, the costs of appropriate analyses, inspections and storage of the vehicles suspected to be end-of-life vehicles may be charged to the persons arranging the shipment of those vehicles.

Amendment 271

Article 48 Enforcement cooperation at national level and between Member States

Proposal for a regulation

1. Member States shall establish, as regards all relevant competent authorities involved in the enforcement of this Regulation, effective mechanisms to enable those authorities to cooperate and coordinate domestically concerning the development and implementation of enforcement policies and activities related to monitoring vehicles registration, deregistration, suspension and cancellation of the registration, certification of destruction, export of used vehicles as well as prevention of illegal treatment and export of end-of-life vehicles.

Article 34 – paragraph 2

2. Member States shall cooperate bilaterally and multilaterally with one another in order to facilitate the prevention and detection of illegal treatment and export of end-of-life vehicles and to address the issue of missing vehicles. They shall exchange relevant information on vehicle registration, de-registration and suspension and cancellation of the registration, through the electronic exchange system referred to in Article 46. They shall also exchange relevant information on authorised treatment facilities and repair and maintenance operators not permitted as authorised treatment facilities, and other facilities and economic operators, which may perform operations concerning treatment of end-of-life vehicles. They shall share information, experience and knowledge on illegal activities linked to end-of-life vehicles, enforcement measures and joint actions on a regular basis within established structures, such as enforcement networks, agencies and the Committee established pursuant to Article 52 of this Regulation.

Amendment 272

The exchange of vehicle registration data shall include access to and exchange of data on performance and the nature and results of the checks carried out with other Member States’ competent authorities to facilitate the enforcement of this Regulation.

Proposal for a regulation

3. Member States shall notify to the Commission the members of their permanent staff that are responsible for the cooperation referred to in paragraph 2 of this Article and Article 45.

Article 34 – paragraph 2 a (new)

▌

Amendment 273

Article 49 Penalties

Proposal for a regulation

By … [the first day of the month following 36 months from the date of entry into force of this Regulation], Member States shall lay down the rules on penalties applicable to infringements of Article 15(1), Article 16, Article 18(1), Article 22(1) and (2), Articles 23 and 24, Article 25(1) and (2), Articles 26 to 31 and Articles 33, 34, 36, 37 and 39 of this Regulation, and shall take all measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive. Member States shall, without delay, notify the Commission of those rules and of those measures and shall notify it, without delay, of any subsequent amendment affecting them.

Article 36 – paragraph 1

Article 50 Reporting to the Commission

Amendment 274

1. From … [the first day of the month following 36 months from the date of entry into force of this Regulation], Member States shall make publicly available in an aggregated form for each calendar year and in the format established by the Commission pursuant to paragraph 5, the following data, which shall be based on information and data received from producers, producer responsibility organisations and waste management operators:

Proposal for a regulation

(a) the number of vehicles registered in the Member State;

Article 36 – paragraph 2

(b) the number of vehicles made available on the market for the first time in the territory of the Member State;

Amendment 275

(c) the number and weight of end-of-life vehicles collected and depolluted in the Member State;

Proposal for a regulation

(d) the number and weight of end-of-life vehicles recycled in the territory of the Member State;

Article 36 – paragraph 2 a (new)

(e) the number and weight of end-of-life vehicles exported or shipped for further treatment to another Member State or a third country;

Amendment 276

(f) the number and weight of end-of-life vehicles imported or shipped for further treatment from a third country;

Proposal for a regulation

(g) the number of used vehicles released for export and the number of used vehicles imported ;

Chapter V – Section 1 – title

(h) the number of certificates of destruction issued;

Amendment 277

(i) the total weight and, where relevant, the amount of parts, components and materials removed from end-of-life vehicles for purpose of:

Proposal for a regulation

(i) reuse;

Article 37 – title

(ii) remanufacturing or refurbishment;

Amendment 278

(iii) recycling;

Proposal for a regulation

(iv) recovery, including energy recovery;

Article 37 – paragraph 1

(v) disposal;

Amendment 279

(j) the amount and weight of end-of-life vehicles treated in a manner different from that indicated in point (d);

Proposal for a regulation

(k) the amount and weight of end-of-life-vehicles used for backfilling;

Article 38 – paragraph 1

(l) the rates of the targets laid down in Article 33 attained by all waste management operators that are active in the Member State;

Amendment 280

(m) the use of the exemption provided for in Article 29(2), and how it was monitored by the reporting Member State;

Proposal for a regulation

(n) data on the producer responsibility organisations, including the names of the legal persons they represent;

Article 38 – paragraph 3 – point a

(o) data on the implementation of Article 21;

Amendment 281

(p) the quantities of parts and components containing relevant amounts of critical raw materials removed from end-of-life vehicles and the quantities of critical raw materials recovered from these parts and components.

Proposal for a regulation

Member States shall make the data referred to in the first subparagraph publicly available within 18 months of the end of the reporting period for which it is collected. The data shall be machine readable, sortable and searchable, and shall respect open standards for third party use. Member States shall notify the Commission when the data referred to in the first subparagraph is made available.

Article 38 – paragraph 3 – point b

The first reporting period shall be the first calendar year after the adoption of the implementing act referred to in paragraph 5.

Amendment 282

2. The data made available by Member States in accordance with paragraph 1 shall be accompanied by a quality check report. That information shall be presented in the format established by the Commission pursuant to paragraph 5.

Proposal for a regulation

3. Every five years, Member States shall draw up a report summarising:

Article 38 – paragraph 7

(a) incentives introduced to promote the reuse, remanufacturing and refurbishment of parts and components in accordance with Article 32 and their estimated impact;

Amendment 283

(b) the application of penalties and other sanctions envisaged in their national law for infringements of this Regulation adopted in accordance with Article 49, including a list of type of infringements notified and types of measures taken;

Proposal for a regulation

(c) results of inspections carried out in accordance with Article 47;

Article 39 – paragraph 1

(d) the manner of application of definitions of ‘end-of-life vehicle’ and ‘used vehicle’, including practical difficulties encountered in that context.

Amendment 284

Member States shall submit that report to the Commission within six months of the end of the five year period which it covers. The first report shall be provided to the Commission by … [the first day of the month following six years from the date of entry into force of this Regulation].

Proposal for a regulation

The Commission shall review the reports submitted by the Member States and ▌ shall draw up and publish reports on the information received in order to support the evaluation of the implementation of this Regulation in Member States and to facilitate the exchange of information on best practices applied in the Member States.

Article 39 – paragraph 2

4. For the purpose of monitoring the implementation of this Regulation, the Commission shall collect and review the information made available in accordance with this Article.

Amendment 285

5. The Commission shall adopt implementing acts laying down:

Proposal for a regulation

(a) the methodology and rules for the calculation, verification and reporting of data in accordance with paragraph 1, including:

Article 40 – paragraph 3

(i) the methodology for determining the amount and weight of parts, components and materials removed for purposes referred to in paragraph 1, points (i), (j), (k) and (p);

Amendment 286

(ii) the methodology for determining the weight of recycled waste, including determination of calculation points and measurement points, and, if necessary, possibilities of applying average loss rates;

Proposal for a regulation

(iii) the methodology for calculation and verification of the attainment of the reuse, recycling and recovery targets referred to in Article 33, including in the case of combined shredding of end-of-life vehicles with other waste referred to in Article 27 and Part G, point 3, of Annex VIII;

Article 40 – paragraph 3 a (new)

(b) the format for the reporting to the Commission referred to in paragraph 1, as well as the format for the quality check report.

Amendment 287

Those implementing acts shall be adopted by … [the last day of the month following 30 months from the date of entry into force of this Regulation], in accordance with the examination procedure referred to in Article 52(2).

Proposal for a regulation

6. Producers, producer responsibility organisations, waste management operators and other relevant economic operators shall provide competent authorities with accurate and reliable data allowing Member States to fulfil their reporting obligations under this Article.

Article 41 – paragraph 1

Chapter VIII Delegated powers and committee procedure

Amendment 288

Article 51 Exercise of the delegation

Proposal for a regulation

1. The power to adopt delegated acts is conferred on the Commission subject to the conditions laid down in this Article.

Article 42 – paragraph 3

2. The power to adopt delegated acts referred to in Articles 5(3), 5(6), 6(6) to (9), 7(3), 11(4), 12(2), 21(2), 22(6), 26(3), 37(3) and 41(3) shall be conferred on the Commission for a period of 5 years from … [the date of entry into force of this Regulation]. The Commission shall draw up a report in respect of the delegation of power no later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension no later than three months before the end of each period.

Amendment 289

3. The delegation of power referred to in Articles 5(3), 5(6), 6(6) to (9),7(3), 11(4), 12(2), 21(2), 22(6), 26(3), 37(3) and 41(3) may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.

Proposal for a regulation

4. Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making.

Article 45 – paragraph 1

5. As soon as it adopts a delegated act, the Commission shall notify it simultaneously to the European Parliament and to the Council.

Amendment 290

6. A delegated act adopted pursuant to Articles 5(3), 5(6), 6(6) to (9),7(3), 11(4), 12(2), 21(2), 22(6), 26(3), 37(3) and 41(3) shall enter into force only if no objection has been expressed either by the European Parliament or the Council within a period of two months of notification of that act to the European Parliament and to the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.

Proposal for a regulation

Article 52 Committee procedure

Article 45 – paragraph 3 a (new)

1. The Commission shall be assisted by the committee established by Article 39 of Directive 2008/98/EC. That committee shall be a committee within the meaning of Regulation (EU) No 182/2011.

Amendment 291

▌

Proposal for a regulation

2. Where reference is made to this paragraph, Article 5 of Regulation (EU) No 182/2011 shall apply.

Article 45 – paragraph 5 – subparagraph 1

Chapter IX Amendments

Amendment 292

Article 53 Amendments to Regulation (EU) 2023/1542

Proposal for a regulation

Annex I to Regulation (EU) 2023/1542 is amended in accordance with Annex XII to this Regulation.

Article 46 – paragraph 1 – point a a (new)

Article 54 Amendments to Regulation (EU) 2019/1020

Amendment 293

In Regulation (EU) 2019/1020, Annex II, points 10 and 11 are deleted.

Proposal for a regulation

▌

Article 46 – paragraph 1 – point c

Article 55 Amendments to Regulations (EU) 2018/858 and (EU) No 168/2013

Amendment 294

Annex II to Regulation (EU) 2018/858 and Annex II to Regulation (EU) No 168/2013 are amended in accordance with Annex XI to this Regulation.

Proposal for a regulation

Chapter X Final provisions

Article 46 – paragraph 3

Article 56 Review

Amendment 295

1. By … [the last day of the year following 95 months from the date of entry into force of this Regulation], the Commission shall review and draw up a report on the application of this Regulation and its impact on the environment, human health and the functioning of the single market and submit it to the European Parliament and to the Council. Where appropriate, the report shall be accompanied by a legislative proposal to amend relevant provisions of this Regulation.

Proposal for a regulation

2. Taking account of technical progress and practical experience gained in Member States as well as any revision of Regulation (EC) No 1907/2006, the Commission shall, in its report, include an evaluation of the following:

Article 46 – paragraph 3 a (new)

(a) the need to extend the scope of this Regulation, in particular provisions of Chapters II and III, as well as Chapter IV Section II, to L-category vehicles as defined in Article 4(2) ▌ of Regulation (EU) No 168/2013 and vehicles of categories M2, M3, N2, N3 and O as set out in Article 4(1) of Regulation (EU) 2018/858;

Amendment 296

(b) the need to extend the scope of provisions applicable to vehicles that are typeapproved in multi-stage type-approval and to motor caravans and to include trailer caravans into the scope of this Regulation;

Proposal for a regulation

(c) the need to extend the scope of this Regulation, in particular provisions of Chapters VI to L-category-vehicles, as defined in Article 4(2) of Regulation (EU) No 168/2013;

Article 47 – paragraph 1

(d) the measures concerning provision of information on substances of concern present in vehicles and the need of introducing further provisions addressing substances of concern that may affect high-quality recycling of vehicles at their end-of-life;

Amendment 297

(e) the measures regarding management of end-of-life vehicles laid down in Chapter IV, including the levels of targets laid down in Article 33 and the need of their revision;

Proposal for a regulation

(f) the need to extend the scope of this Regulation with regard to recycling target levels as laid down in Article 33, to the vehicle categories to which Article 33 does not apply under this Regulation;

Article 47 – paragraph 2 – subparagraph 1

(g) infringements and the effectiveness, proportionality and dissuasiveness of penalties as set out in Article 49;

Amendment 298

(h) the need to amend Article 5;

Proposal for a regulation

(i) the extent to which the issue of missing vehicles has been solved, including estimates on the number of missing vehicles and the impact of the measures regarding export of used vehicles, and the need to include further measures addressing the issue of the traceability of vehicles;

Article 47 – paragraph 3 a (new)

▌

Amendment 299

(j) the requirements for recycled plastic content, including targets and obligations for recycling installations in and outside the Union as laid down in Article 6(1) to (4) of this Regulation, and the need for revision on that basis, including an evaluation of developments for steel and aluminium relating to Article 6(7) and (8) of this Regulation and under other relevant Union legislation, such as Regulation (EU) 2025/40 or Regulation (EU) 2024/1781, to ensure coherence and alignment;

Proposal for a regulation

(k) the cost allocation mechanism for vehicles becoming end-of-life vehicles in another Member State laid down in Article 22 and the need for its revision;

Article 47 – paragraph 3 b (new)

(l) provisions on processes that may affect high-quality recycling of vehicles at their end-of-life;

Amendment 300

(m) the impact of differences in the national roadworthiness criteria on the used vehicles exports.

Proposal for a regulation

(n) the effectiveness, interoperability and reliability of national vehicle registration systems and their cross border exchange of information in ensuring the accurate identification, status and traceability of vehicles throughout their lifecycle, with particular attention to:

Article 49 – paragraph 1 – subparagraph 1 – point e a (new)

(i) the impact of temporary de-registration on the accuracy, accessibility, and traceability of vehicle records, including its role in identifying missing vehicles;

Amendment 301

(ii) the need for minimum requirements for vehicle deregistration across the Union, such as establishing a maximum duration and strict renewal conditions, to strengthen vehicle traceability and prevent their illegal treatment.

Proposal for a regulation

3. By … [the last day of the year following 72 months from the date of entry into force of this Regulation], the Commission shall review the state of technological development, environmental and economic performance and availability of biobased plastic content and of elastomers derived from the reprocessing of tyres in new vehicles, taking into consideration the sustainability criteria laid down in Article 29 of Directive (EU) 2018/2001 and any sustainability criteria to be laid down for tyres under Regulation (EU) 2024/1781.

Article 49 – paragraph 1 – subparagraph 1 – point e b (new)

4. Where appropriate, and based on the review referred to in paragraph 3, the Commission may present a legislative proposal in order to:

Amendment 302

(a) lay down sustainability requirements for biobased feedstock in plastic used in vehicles;

Proposal for a regulation

(b) lay down targets to increase the use of biobased feedstock in plastic used in vehicles;

Article 49 – paragraph 1 – subparagraph 1 – point m a (new)

(c) lay down targets to include the use of elastomers derived from the reprocessing of tyres from vehicles;

Amendment 303

(d) assess to which extent the targets referred to in point (b) may be combined with or added to the targets set out in Article 6(1);

Proposal for a regulation

(e) assess to which extent the targets referred to in point (c) may be combined with the targets set out in Article 6(1);

Article 49 – paragraph 3 – subparagraph 1 – point a

(f) modify, where appropriate, the definition of biobased plastic set out in Article 3(1), point (53), of Regulation (EU) 2025/40, the definition of plastic in Article 3(1), point (9), of this Regulation and the scope of the recycled plastic targets as specified in Article 6(1) of this Regulation;

Amendment 304

(g) modify, where appropriate, the calculation and verification methodology as referred to in Article 6(2) and the requirements for installations processing elastomers from tyres based in the Union and in third countries.

Proposal for a regulation

5. Where appropriate to ensure the effective and uniform end-of-life vehicles' traceability, and based on the review referred to in paragraph 2, point (n), the Commission may present a legislative proposal on deregistration rules of vehicles throughout the Union.

Article 49 – paragraph 3 – subparagraph 3

6. By … [60 months from the date of entry into force of this Regulation], the Commission shall conduct an assessment to evaluate, based on the declarations made under Article 10, whether manufacturers are on track to comply with the recycled plastic targets laid down in Article 6(1). The assessment shall particularly evaluate:

Amendment 305

(a) the availability of suitable plastic recycling technologies;

Proposal for a regulation

(b) the sufficient availability of recycled plastic;

Article 49 – paragraph 5 – subparagraph 1 – point a – point i

(c) the level of quality of recycled plastic comparing to the level of safety required; and

Amendment 306

(d) technical and economic difficulties to reach the recycled plastic targets.

Proposal for a regulation

On the basis of that assessment, the Commission may, where appropriate, submit a legislative proposal to the European Parliament and to the Council to amend the targets laid down in Article 6(1) in order to provide for derogations from the scope, timing or level of minimum percentages set out therein.

Article 49 – paragraph 5 – subparagraph 1 – point b

Article 57 Repeal and transitional provisions

Amendment 307

1. Directive 2000/53/EC is repealed with effect from … [the first day of the month following 24 months from the date of entry into force of this Regulation].

Proposal for a regulation

However, the following provisions of Directive 2000/53/EC shall continue to apply:

Article 49 – paragraph 5 – subparagraph 2

(a) Article 4(2) and Annex II, until … [the last day of the month following 71 months from the date of entry into force of this Regulation]; however, entries 5(a), 5(b)(i), 5(b)(ii) and 16 of Annex II to Directive 2000/53/EC shall cease to apply from … [the date of entry into force of this Regulation];

Amendment 308

(b) Article 5(4), second subparagraph, Article 6(3), second subparagraph, Article 7(1), Article 8(3) and (4), until … [the last day of the month following 35 months from the date of entry into force of this Regulation];

Proposal for a regulation

(c) Article 6(3), first subparagraph, and Annex I until … [the last day of the month following 35 months from the date of entry into force of the Regulation];

Article 49 – paragraph 6

(d) Article 7(2), point (b), until … [the last day of the year following 35 months from the date of entry into force of this Regulation];

Amendment 309

(e) Article 9(1a), first and third subparagraphs, Article 9(1b) and Article 9(1d), until … [the last day of the month following 35 months from the date of entry into force of this Regulation];

Proposal for a regulation

(f) Article 9(1a), second subparagraph, until … [the last day of the month following 59 months from the date of entry into force of the Regulation].

Article 50 – paragraph 2

2. Directive 2005/64/EC is repealed with effect from … [the last day of the month following 71 months from the date of entry into force of this Regulation].

Amendment 310

However, its Article 6(3) is repealed with effect from … [the last day of the month following 35 months from the date of entry into force of this Regulation].

Proposal for a regulation

3. References to the repealed Directives shall be construed as references to this Regulation and shall be read in accordance with the correlation tables in Annex XV.

Article 50 – paragraph 3

4. By way of derogation from Article 8(2) of this Regulation, until … [72 months from the date of entry into force of this Regulation], where that Article refers to Article 4 of this Regulation, such a reference shall be construed as a reference to Article 5 of Directive 2005/64/EC.

Amendment 311

By way of derogation from Article 8(2) of this Regulation, until … [72 months from the date of entry into force of this Regulation], where that Article refers to Article 5 of this Regulation, such a reference shall be construed as a reference to Article 6(2) of Directive 2005/64/EC.

Proposal for a regulation

Article 58 Applicability to and in the United Kingdom in respect of Northern Ireland

Article 50 – paragraph 6

1. Article 14 shall apply only in respect of Article 30, Article 31 and Article 35(1) to and in the United Kingdom in respect of Northern Ireland.

Amendment 312

2. Articles 15 to 29, Articles 32 to 34 and Article 35(2) shall not apply to and in the United Kingdom in respect of Northern Ireland.

Proposal for a regulation

3. Article 47(2), point (a), and Article 47(3) shall not apply to and in the United Kingdom in respect of Northern Ireland.

Article 55 – paragraph 1

4. Article 48(1) and (2) shall not apply as regards the prevention of illegal treatment of end-of-life vehicles to and in the United Kingdom in respect of Northern Ireland.

Amendment 313

5. Article 48(2) shall not apply as regards the exchange of relevant information on authorised treatment facilities to and in the United Kingdom in respect of Northern Ireland.

Proposal for a regulation

6. Article 49 shall not apply to and in the United Kingdom in respect of Northern Ireland as regards Article 15(1), Article 16, Article 19(1), Article 22(1) and (2), Article 23, Article 24, Article 25(1) and (2), Articles 27 to 29, Article 33 and Article 34.

Article 55 – paragraph 2 – point a

7. Article 50(1), points (c), (d), (h), (i)(iii), (i)(iv), (i)(v), (j), (k), (l), (m), (n) and (o) and Article 50(3), point (a), shall not apply to and in the United Kingdom in respect of Northern Ireland.

Amendment 314

Article 59 Entry into force and application

Proposal for a regulation

1. This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Article 55 – paragraph 2 – point a a (new)

2. It shall apply from … [the first day of the month following 24 months from the date of entry into force of this Regulation].

Amendment 315

However, Articles 4(3), 5(2), 5(3) to (9), 6(4) to (9), 6(11), 7(3), 7(4), 9(7), 11(4), 12(2), 13(6), 14(4), 15(6), 21(2), 22(6), 26(3), 37(3), 41(3), 46(5) and 50(5) shall apply from … [1 month from the date of entry into force of the Regulation], Article 53 shall apply from … [the date of entry into force of this Regulation] and Article 55 shall apply from … [the first day of the month following 72 months from the date of entry into force of this Regulation].

Proposal for a regulation

This Regulation shall be binding in its entirety and directly applicable in the Member States.

Article 55 – paragraph 2 – point e a (new)

Done at...,

Amendment 316

For the European Parliament For the Council

Proposal for a regulation

The President The President

Article 55 – paragraph 2 – point e b (new)

ANNEX I

Amendment 317

CRITERIA FOR DETERMINATION WHETHER A ▌ VEHICLE IS AN END-OF-LIFE VEHICLE

Proposal for a regulation

This Annex establishes the criteria to determine whether a vehicle is an end-of-life vehicle, and shall be applied as follows:

Article 55 – paragraph 2 – point e c (new)

Part A lays down the criteria to assess the irreparability of a vehicle. If one or more of these criteria are met, the vehicle shall be considered to be an end-of-life vehicle.

Amendment 318

If none of the criteria of Part A are met, the vehicle shall be assessed in accordance with the criteria provided for in Part B. If one or more of the criteria of Part B are met, a technical assessment shall determine which repairs are needed to obtain a roadworthiness certificate in accordance with Directive 2014/45/EU in the Member State where the vehicle was registered before repair. Based on that technical assessment, the vehicle owner shall decide whether he or she wants to discard the vehicle.

Proposal for a regulation

If, within five years of that technical assessment, the vehicle owner does not obtain a roadworthiness certificate in accordance with Directive 2014/45/EU, the vehicle shall be considered to be an end-of-life vehicle. For the period of those five years, that technical assessment shall constitute documentation that the vehicle is not an end-of-life vehicle.

Article 55 – paragraph 2 a (new)

The assessment referred to in this Annex shall be conducted by an independent automotive expert. Member States may establish an exhaustive list of independent automotive experts to carry out those assessments.

Amendment 319

Following a request by a vehicle owner, the competent authorities of the Member State of registration of a vehicle, or one of its appointed authorising bodies, may exempt a vehicle that is considered to be an end-of-life vehicle in accordance with this Annex from being an end-of-life vehicle, when the vehicle concerned is subject to repair,.

Proposal for a regulation

PART A

Annex I – Part A – point 1 – introductory part

CRITERIA FOR ASSESSMENT OF END-OF-LIFE VEHICLES

Amendment 320

A vehicle is an end-of-life vehicle when it meets one or more of the following criteria:

Proposal for a regulation

(a) it has been cut into pieces or dismantled for reuse of its parts;

Annex I – Part A – point 1 – point a

▌

Amendment 321

(b) it has been ▌ burnt to the point where the engine compartment or passenger compartment is completely destroyed;

Proposal for a regulation

(c) it has ▌ been submerged in water to a level above the dashboard;

Annex I – Part A – point 1 – point b

(d) one or several of the following components of the vehicle can, from a technical point of view, be neither repaired nor replaced:

Amendment 322

(i) ground coupling components (such as tyres and wheels), suspension, steering, braking, and their control components;

Proposal for a regulation

(ii) seat fixings and joints;

Annex I – Part A – point 1 – point c

(iii) airbags, pre-tensioners, safety belts, and their peripheral operating components;

Amendment 323

(iv) the vehicle's hull and chassis or shell;

Proposal for a regulation

(e) its structural and safety components have technical defects that are irreversible and that render them non-replaceable;

Annex I – Part A – point 1 – point d

▌

Amendment 324

(f) it was handed over for treatment to a collection point or an authorised treatment facility;

Proposal for a regulation

(g) it has been declared as a total technical loss by an insurance company, based on the technical assessment carried out by an automotive expert.

Annex I – Part A – point 1 – point e – introductory part

▌

Amendment 325

PART B

Proposal for a regulation

LIST OF INDICATIVE ▌ CRITERIA FOR END-OF-LIFE VEHICLES ▌

Annex I – Part A – point 1 – point f

If none of the criteria of Part A apply, the vehicle shall be assessed in accordance with the following criteria ▌:

Amendment 326

(a) it is abandoned or the means allowing it to be identified are lacking, in particular the VIN;

Proposal for a regulation

▌

Annex I – Part A – point 1 – point g

(b) it is not appropriately protected against damage during storage, transportation, loading and unloading; ▌

Amendment 327

▌

Proposal for a regulation

(c) the costs necessary to repair the vehicle to a technical condition that would be sufficient to obtain a roadworthiness certificate added to its current value exceed its estimated market value after repair;

Annex I – Part A – point 2

(d) it has been submerged in water to a level below the dashboard, with damage to the engine or electrical system;

Amendment 328

(e) its fuel or fuel vapours have been discharged, posing a risk of fire and explosion;

Proposal for a regulation

(f) gas has leaked from its liquid gas system posing a risk of fire and explosion;

Annex I – Part A – point 3

(g) its operating liquids (fuel, brake fluid, anti-freeze liquid, battery acid electrolyte solution, cooling liquid) have been discharged, posing a risk of water pollution;

Amendment 329

(h) it has been dismantled; or

Proposal for a regulation

(i) it has one or more entry points welded up or closed by insulating foam.

Annex I – Part B – paragraph 1 – introductory part

▌

Amendment 330

ANNEX II

Proposal for a regulation

CRITERIA FOR RECOGNISING THE STATUS OF VEHICLES OF SPECIAL CULTURAL INTEREST

Annex I – Part B – paragraph 1 – point b

1. The competent authorities of the Member State of registration of a vehicle, or one of its appointed authorising bodies, may recognise a vehicle as having a special cultural interest when it meets all of the following criteria:

Amendment 331

(a) its unique historical or cultural value or status has been documented by the vehicle owner or by the competent authorities of the Member State where a vehicle is registered or it is a single modified or custom-built vehicle which has been individually approved in accordance with Regulation (EU) 2018/858 or national law;

Proposal for a regulation

(b) the vehicle owner is known and can be identified;

Annex I – Part B – paragraph 1 – point c

(c) the parts of the vehicle can be identified by a serial number, or other identification provided by the manufacturer or assigned by the competent authority;

Amendment 332

(d) the vehicle can be identified by the VIN, or serial number, or other identification provided by the manufacturer or assigned by a competent authority.

Proposal for a regulation

Upon request by the vehicle owner, the competent authorities of the Member State of registration shall issue a certificate recognising a vehicle as having a special cultural interest where the criteria set out in the first subparagraph of this point are fulfilled.

Annex I – Part B – paragraph 1 – point d

Upon request by the vehicle owner, the competent authorities of the Member State of registration shall revoke the certificate referred to in the second subparagraph of this point.

Amendment 333

2. The owner of the vehicle of special cultural interest shall ensure that:

Proposal for a regulation

(a) the vehicle is stored, transported or used in environmentally sound manner in accordance with Union or national law;

Annex I – Part B – paragraph 1 – point e

(b) the certificate referred to in the second subparagraph of point 1 is provided or made available to authorities upon request.

Amendment 334

3. The compliance of the vehicle with the criteria of points 1 and 2 shall be verified at least every five years, or in the event of a change of ownership.

Proposal for a regulation

ANNEX III

Annex I – Part B – paragraph 1 – point e a (new)

CALCULATION OF THE RATES OF REUSABILITY, RECYCLABILITY AND RECOVERABILITY

Amendment 335

For the purposes of this Annex, ‘reference vehicle’ means the version within a vehicle type, which is identified by the type-approval authority, in consultation with the manufacturer and in accordance with the criteria laid down in Part A, as being the most problematic in terms of reusability, recyclability and recoverability.

Proposal for a regulation

PART A

Annex I – Part B – paragraph 1 – point e b (new)

1. The materials present in the vehicle and their respective shares and locations shall be specified, together with any relevant information necessary to correctly calculate the rates of recyclability and recoverability.

Amendment 336

2. Masses shall be expressed in kg with one decimal place. The rates shall be calculated as a percentage with one decimal place, then rounded as follows:

Proposal for a regulation

(a) if the figure following the decimal point is between 0 and 4, the total is rounded down;

Annex I – Part B – paragraph 1 – point e c (new)

(b) if the figure following the decimal point is between 5 and 9, the total is rounded up.

Amendment 337

3. For the purposes of the selection of the reference vehicles, account shall be taken of the following criteria:

Proposal for a regulation

(a) the type of bodywork;

Annex I – Part B – paragraph 1 – point e d (new)

(b) the available trim levels;

Amendment 338

(c) the available optional equipment which can be fitted under the manufacturer's responsibility.

Proposal for a regulation

4. Should the type-approval authority and the manufacturer fail jointly to identify the most problematic version within a type of vehicle, in terms of reusability, recyclability and recoverability, one reference vehicle shall be selected, within:

Annex IV – Part A – point 1

(a) each ‘type of bodywork’, as defined in part C, point 2, of Annex I to Regulation (EU) 2018/858 in the case of M1 vehicles;

Amendment 339

(b) each ‘type of bodywork’, i.e., van, chassis-cab, pick-up, etc., in the case of N1 vehicles.

Proposal for a regulation

5. For the purposes of checks of the materials and masses of component parts, the manufacturer shall make available vehicles and component parts as deemed necessary by the type-approval authority.

Annex IV – Part A – point 2 – point b

PART B

Amendment 340

1. In order to be considered as reusable, components or parts shall be removable in a readily and non-destructive manner.

Proposal for a regulation

2. The total mass of reusable parts, components and materials shall be considered as 100 % reusable, recyclable and recoverable.

Annex IV – Part A – point 2 – point c

3. Parts, components and materials listed in Part B, points 1, 2 and 3, of Annex VIII shall be considered as 0 % reusable and 100 % recyclable and recoverable. Parts and components listed in Part E of Annex VIII shall be considered as 0 % reusable and 100 % recyclable and recoverable. The methodology shall ensure, that in case of an amendment to Annex VIII resulting in the extension of the list of parts and components listed in Part E of that Annex, the newly added parts and components shall be considered as 0 % reusable and 100 % recyclable and recoverable.

Amendment 341

4. The calculation of the rates of reusability, recyclability and recoverability shall be coherent with the circularity strategy, reflecting technological progress in end-of-life treatment technologies.

Proposal for a regulation

ANNEX IV

Annex IV – Part A – point 3

CONDITIONS AND MAXIMUM CONCENTRATION VALUES FOR THE PRESENCE OF LEAD, MERCURY, CADMIUM AND HEXAVELENT CHROMIUM IN MATERIALS, PARTS AND COMPONENTS

Amendment 342

A maximum concentration value of substances up to 0,1 % by weight in homogeneous material for lead, hexavalent chromium and mercury and up to 0,01 % by weight in homogeneous material for cadmium shall be tolerated.

Proposal for a regulation

Spare parts placed on the market after 1 July 2003 which are used for vehicles placed on the market before 1 July 2003, except for wheel balance weights, carbon brushes for electric motors and brake linings, shall be exempted from Article 5(4).

Annex IV – Part A – point 5 – introductory part

Notes to the table:

Amendment 343

1. This exemption shall be reviewed in 2030 in accordance with Article 5(6).

Proposal for a regulation

2. Applies to aluminium alloys where lead is not intentionally introduced, but is present due to the use of recycled aluminium.

Annex IV – Part A – point 5 – point a

▌

Amendment 344

3. Dismantling if, in correlation with entry 10(a), an average threshold of 60 grams per vehicle is exceeded. For the purposes of this note, electronic devices not installed by the manufacturer on the production line shall not be taken into account.

Proposal for a regulation

4. Dismantling if, in correlation with entries 8(a) to 8(k), an average threshold of 60 grams per vehicle is exceeded. For the purposes of this note, electronic devices not installed by the manufacturer on the production line shall not be taken into account.

Annex IV – Part A – point 5 – point b

ANNEX V

Amendment 345

CIRCULARITY STRATEGY

Proposal for a regulation

PART A

Annex IV – Part A – point 5 – point c

ELEMENTS OF THE CIRCULARITY STRATEGY

Amendment 346

1. A non-technical description of the actions planned to ensure that the vehicles ▌ meet the requirements of Articles 4 to 7 throughout their production.

Proposal for a regulation

2. A non-technical description of procedures implemented by the manufacturer to:

Annex IV – Part A – point 5 – point d

(a) collect the ▌ data through the full supply chain relevant for meeting the requirements of Articles 4 to 7;

Amendment 347

(b) check and verify the information received from suppliers;

Proposal for a regulation

(c) react adequately where the data received from the suppliers indicate a risk of non-compliance with the requirements of Article 4, 5 or 6.

Annex IV – Part A – point 5 – point e a (new)

3. Information ▌ on end-of-life treatment technologies in place, expected technological progress in end-of-life treatment technologies and capacity investment in such technologies ▌, that the manufacturer used in order to calculate the reusability, recyclability and recoverability in accordance with Article 4 of their vehicle types.

Amendment 348

4. Information on the share of recycled content in vehicles as referred to in Articles 6 and 10.

Proposal for a regulation

5. A list of actions that the manufacturer commits to carry out in order to ensure that the treatment of end-of-life vehicles ▌ is carried out in accordance with this Regulation, with a particular focus on:

Annex IV – Part A – point 6

(a) measures designed to facilitate removal of parts indicated in Part C of Annex VIII;

Amendment 349

▌

Proposal for a regulation

(b) measures to address the challenges posed by the use of materials and techniques which hamper easy dismantling or which make recycling very challenging ▌;

Annex IV – Part A – point 7 – paragraph 1

(c) measures to promote the reuse of parts and components;

Amendment 350

(d) research and development activities, investments in the development of recycling technologies or infrastructure, as well as cooperation with waste management operators, conducted in order to implement the actions referred to in points (a) to (c).

Proposal for a regulation

▌

Annex IV – Part A – point 7 – paragraph 2

PART B

Amendment 351

FOLLOW-UP AND UPDATE OF THE CIRCULARITY STRATEGY

Proposal for a regulation

1. The manufacturers shall provide an update of the circularity strategy at least every five years.

Annex IV – Part B – point 1

2. The updated circularity strategy shall include the relevant changes and in particular the following:

Amendment 352

(a) a description of how the actions referred to in point 5 of Part A have been undertaken, together with an assessment of their effectiveness, and, where one or more actions indicated in the strategy has not been conducted, an explanation of the reasons for this;

Proposal for a regulation

(b) information about the significant changes in the design and production undertaken by the manufacturer to improve the circularity of vehicles.

Annex IV – Part B – point 2 – introductory part

▌

Amendment 353

ANNEX VI

Proposal for a regulation

INFORMATION REQUIREMENTS ON REMOVAL AND REPLACEMENT

Annex IV – Part B – point 2 – point a

1. Electric vehicle batteries and light means of transport batteries incorporated in the vehicle:

Amendment 354

(a) original equipment number;

Proposal for a regulation

(b) location;

Annex IV – Part B – point 2 – point b

(c) weight;

Amendment 355

(d) type of battery chemistry;

Proposal for a regulation

(e) instructions for safe discharging of the battery;

Annex IV – Part B – point 2 – point c

(f) technical instructions on removal and replacement, including the sequence of all steps and types of joining, fastening, sealing techniques;

Amendment 356

(g) tools or technologies required for the access, removal and replacement of the electric vehicle batteries and light means of transport batteries.

Proposal for a regulation

▌

Annex IV – Part B – point 3

2. E-drive motors incorporated in the vehicle:

Amendment 357

(a) original equipment number;

Proposal for a regulation

(b) location;

Annex V – point 1 – introductory part

(c) weight;

Amendment 358

(d) the types of permanent magnets present in e-drive motors as listed in Article 28(1), point (b), of Regulation (EU) 2024/1252;

Proposal for a regulation

▌

Annex V – point 1 – point a

(e) technical instructions on removal and replacement, including the sequence of all steps and types of joining, fastening, sealing techniques;

Amendment 359

(f) tools or technologies required for the access, removal and replacement of the e-drive motors.

Proposal for a regulation

3. Components, parts and materials listed in Part B of Annex VIII:

Annex V – point 1 – point g a (new)

(a) original equipment number;

Amendment 360

(b) location;

Proposal for a regulation

(c) weight;

Annex V – point 2 – point a

(d) presence of the substances listed in Article 5(4), which need to be labelled as referred to in Annex IV in a vehicle;

Amendment 361

(e) technical instructions on removal, including the sequence of all steps;

Proposal for a regulation

(f) availability of best treatment techniques.

Annex V – point 3 – point b

4. Components, parts and materials listed in Part C of Annex VIII:

Amendment 362

(a) original equipment number;

Proposal for a regulation

(b) location;

Annex V – point 4 – point a

(c) technical instructions on removal and replacement, including the sequence of all steps;

Amendment 363

(d) information, specifications, tools and processes, including software updates, required for remanufacturing and refurbishment.

Proposal for a regulation

5. Digitally coded components and parts in a vehicle:

Annex V – point 4 – point c a (new)

(a) number;

Amendment 364

(b) location;

Proposal for a regulation

(c) technical instructions on access, removal and replacement of components, including ▌ coding and software necessary to activate spare parts and components to function in another vehicle, and process information concerning their deregistering and decoupling from a VIN including, where relevant, instruction on how to use a diagnostic tool with a view to their future reuse;

Annex V – point 5 – point c

(d) description on functionality, interchangeability and compatibility with specific parts and components of other makes and models;

Amendment 365

(e) contact point of the manufacturer for technical assistance.

Proposal for a regulation

6. For the purposes of point 5(c), where deregistering and decoupling from a VIN of digitally coded components, equipment and parts referred to in Article 11 of this Regulation is required, the manufacturer shall put in place processes to allow waste management operators and repair and maintenance operators to perform such deregistering and decoupling. In that process, the manufacturer may require a certificate of destruction, as well as an authentication of the respective operator. For that purpose, waste management operators and repair and maintenance operators shall obtain and use the authentication credentials required for the manufacturer RMI website referred to in point 2.1. of Annex X to Regulation (EU) 2018/858. Where access to the vehicle on-board diagnostic (OBD) information by waste management operators and repair and maintenance operators is required for such deregistering and decoupling processes, the manufacturer may, as a condition for issuing any access credentials:

Annex VI – point 4

(a) require a continuous online connection, at the time of performing the removal, from the diagnostic tool to the diagnostic tool manufacturer’s server as well as from the diagnostic tool manufacturer’s server to the manufacturer’s server; and

Amendment 366

(b) require the manufacturer of the tool used to access the OBD information to attest to the manufacturer the identity of the diagnostic tool and the pseudonymised identity of the operator and to collect and store the VIN, the unique identifier of the part, where available and supported by the vehicle manufacturer process, the UTC date and time stamp for the relevant activity and the unique diagnostic tool identifier; the manufacturer shall obtain, on request, from the manufacturer of the diagnostic tool access to the information referred to in this point where this is necessary to react to a reasonable suspicion of parts theft or misuse.

Proposal for a regulation

ANNEX VII

Annex VII – Part B – point 2 – paragraph 1 – point b

LABELLING REQUIREMENTS

Amendment 367

1. Vehicle plastic parts, components and materials having a weight of more than 100 grams:

Proposal for a regulation

(a) international standard ISO 1043-1 Plastics – symbols and abbreviated terms. Part 1: Basic polymers and their special characteristics;

Annex VII – Part C – point 1

(b) international standard ISO 1043-2 Plastics – symbols and abbreviated terms. Part 2: Fillers and reinforcing materials;

Amendment 368

(c) international standard ISO 11469 Plastics – Generic identification and marking of plastic products.

Proposal for a regulation

2. Vehicle elastomer parts, components and materials having a weight of more than 200 grams, except tyres: international standard ISO 1629 Rubbers and latices – Nomenclature.

Annex VII – Part C – point 3

3. The symbols ‘[’ or ‘]’ used in the ISO standards can be substituted by brackets.

Amendment 369

▌

Proposal for a regulation

ANNEX VIII

Annex VII – Part C – point 10

TREATMENT REQUIREMENTS

Amendment 370

PART A

Proposal for a regulation

MINIMUM REQUIREMENTS FOR STORAGE SITES AND TREATMENT SITES

Annex VII – Part C – point 11

1. Storage sites, including storage sites in the collection points, for the storage of end-of-life vehicles, prior to their treatment, and of their components, parts and materials, shall:

Amendment 371

(a) have impermeable surfaces with spillage collection facilities, decanters and cleanserdegreasers;

Proposal for a regulation

(b) be equipped for the treatment of water, including rainwater, in compliance with health and environmental requirements;

Annex VII – Part C – point 13

(c) have appropriate storage of end-of-life vehicles and stack only depolluted endoflife vehicles, unless stacking racks are used, to an appropriate height;

Amendment 372

(d) be equipped to enable the immediate removal of fluids and liquids from leaking end-of-life vehicles and the collection of any leaked fluids and liquids using absorbent material.

Proposal for a regulation

Operators of the sites referred to in the first subparagraph shall carry out the actions referred to in point (d) of that subparagraph without delay.

Annex VII – Part C – point 15

2. Storage shall be organised so as to avoid damage to:

Amendment 373

(a) components and parts containing the liquids and fluids listed in points 1 and 3 of Part B of this Annex;

Proposal for a regulation

(b) components, parts and materials listed in Part C of this Annex.

Annex VII – Part C – point 17

3. The sites where end-of-life vehicles and their components, parts and materials are treated shall have:

Amendment 374

(a) impermeable surfaces for appropriate areas with the provision of spillage collection facilities, decanters and cleanser-degreasers;

Proposal for a regulation

(b) appropriate storage for parts, components and materials that have been removed from the end-of-life vehicle, including impermeable storage for oil-contaminated parts, components and materials;

Annex VII – Part C – point 18

(c) appropriate containers for storage of batteries (with electrolyte neutralisation on site or elsewhere), filters and PCB/PCT-containing capacitors;

Amendment 375

(d) appropriate separate storage tanks for the segregated storage of end-of-life vehicle fluids: fuels, oils (motor oil, gearbox oil, power steering oil, transmission oil, hydraulic oil), oil filters, cooling liquids, antifreeze, brake fluids, refrigerants, diesel exhaust fluid and any other fluids or gases contained in the end-of-life vehicle;

Proposal for a regulation

(e) equipment for the treatment of water, including rainwater, in compliance with health and environmental requirements;

Annex VII – Part C – point 19 – point b

(f) appropriate storage for used tyres, taking into account the need to prevent fire hazards and excessive stockpiling.

Amendment 376

4. Authorised treatment facilities that are permitted to treat electric vehicles shall comply with the requirements set out in Annex XII to Regulation (EU) 2023/1542. Authorised treatment facilities accepting electric vehicles with suspected damage to the electric vehicle battery shall assess these batteries as soon as possible but no later than within 24 hours after delivery. Such vehicles and batteries shall be stored separately in a quarantined area as referred to in paragraph 1. The quarantined area shall be equipped with appropriate installations to prevent, detect and constrain electric vehicle battery fires from spreading to other areas, other electric vehicles and other batteries.

Proposal for a regulation

PART B

Annex VII – Part D – point 1 – point b – point i

MINIMUM REQUIREMENTS FOR DEPOLLUTION

Amendment 377

1. The following fluids, liquids and gases shall be removed from the end-of-life vehicle, unless they are necessary for the reuse of the parts concerned:

Proposal for a regulation

(a) fuel;

Annex VII – Part D – point 1 – point b – point ii

(b) motor oil;

Amendment 378

(c) transmission oil;

Proposal for a regulation

(d) gearbox oil;

Annex VII – Part D – point 1 – point b – point iii

(e) power steering oil;

Amendment 379

(f) hydraulic oil;

Proposal for a regulation

(g) cooling liquids;

Annex VII – Part D – point 2 – point b

(h) antifreeze;

Amendment 380

(i) brake fluids;

Proposal for a regulation

(j) refrigerants; ▌

Annex VII – Part E – point 2

(k) diesel exhaust fluids; and

Amendment 381

(l) any other fluids or gases contained in the end-of-life vehicle.

Proposal for a regulation

After removal of the fluids and liquids, drain plugs shall be applied to prevent leakage of remains. The collection containers shall be labelled to indicate the type of liquid that is contained within them and stored separately from each other in a secure location, compliant with the Part A of this Annex, to prevent accidental spillage, leakage or unauthorised access to it.

Annex VII – Part F – point 2

2. The following components, parts and materials shall be neutralised or removed:

Amendment 382

(a) e-call system;

Proposal for a regulation

(b) pyrotechnic parts of airbags;

Annex VII – Part G – point 1

(c) pyrotechnic parts of seat belts;

Amendment 383

(d) any other pyrotechnic parts;

Proposal for a regulation

3. The following components, parts and materials shall be removed from end-of-life vehicles:

Annex VII – Part G – point 2

(a) airbags, liquefied petroleum gas (LPG) tanks, compressed natural gas (CNG) tanks, hydrogen tanks and any other potentially explosive parts and components shall be neutralised;

Amendment 384

(b) oil filters;

Proposal for a regulation

(c) refrigerants shall be treated in accordance with Regulation (EU) 2024/573;

Annex VIII – point 1 – introductory part

(d) components identified as containing mercury ▌ shall be separated during treatment into an identifiable stream, which shall be safely immobilised and disposed in accordance with Article 17 of Directive 2008/98/EC;

Amendment 385

(e) materials containing substances referred to in Article 5(4), which need to be labelled as laid down in Annex IV, shall be separated during treatment into an identifiable stream, which shall be safely immobilised and disposed in accordance with Article 17 of Directive 2008/98/EC.

Proposal for a regulation

All parts, components and materials collected during the depollution shall be stored in designated containers. The collection containers shall be labelled to indicate the components, parts and materials that are contained within them and stored in a secure location in compliance with Part A, in order to prevent accidental spillage, leakage or unauthorised access to it.

Annex IX – point 7

4. The following information on the depollution of the end-of-life vehicles shall be recorded:

Amendment 386

(a) total number of treated end-of-life vehicles;

Proposal for a regulation

(b) the average weight of the end-of-life vehicles before and after depollution and removal;

Annex X a (new)

(c) total quantity of each type of depolluted fluids, parts, components or materials;

(d) name and contact details of the waste transporter, if applicable;

(e) name and contact information of the final treatment site for the fluids and gases, parts, components or materials collected during the depollution process.

PART C

MANDATORY REMOVAL OF PARTS AND COMPONENTS FROM END-OF-LIFE VEHICLES

▌

PART D

REUSE, REMANUFACTURING AND REFURBISHMENT OF PARTS AND COMPONENTS

1. Technical evaluation of the removed parts and components:

(a) For reuse:

(i) the part or component is functional;

(ii) it is fit to be used, in a readily manner, for its primary purpose it was conceived for;

(b) For remanufacturing or refurbishment:

(i) the part or component shall contain all relevant parts;

(ii) it is fit to be remanufactured or refurbished, taking into account any damage, reduced functionality, reduced performance, reduced lifespan and repairs needed ▌;

(iii) there is no apparent heavy corrosion impeding the functionality of the part or component.

2. Minimum information to be provided in the labelling of the parts and components:

(a) name of the component or part;

▌

(b) name, the postal address, indicating a single contact point and e-mail address, a website, if applicable, identifying the authorised treatment facility that removed the component or part.

PART E

COMPONENTS AND PARTS NOT TO BE REUSED

1. All airbags including cushions, pyrotechnic actuators, electronic control units and sensors.

2. Emission after-treatment systems (e.g. catalytic converters, particulate filters) unless those parts comply with the related roadworthiness test laid down in Article 4 of Directive 2014/45/EU.

▌

3. Automatic or non-automatic seat belt assemblies, including webbing, buckles, retractors, pyrotechnic actuators.

4. Seats in cases where they incorporate safety belt anchorages and/or airbags.

5. Steering lock assemblies acting on the steering column.

6. Immobilisers, including transponders and electronic control units.

PART F

SPECIFIC TREATMENT REQUIREMENTS OF THE REMOVED PARTS, COMPONENTS AND MATERIALS

1. SLI Batteries shall be treated in accordance with Article 70 of Regulation (EU) 2023/1542.

2. Electric vehicle batteries shall be treated in accordance with Article 70 of Regulation (EU) 2023/1542.

3. LMT batteries shall be treated in accordance with Article 70 of Regulation (EU) 2023/1542.

4. Portable batteries shall be treated in accordance with Article 70 of Regulation (EU) 2023/1542.

5. Permanent magnet materials containing neodymium, dysprosium or praseodymium (Neodymium-Iron-Boron, NdFeB), as defined in Article 28 of Regulation (EU) 2024/1252, and copper from e-drive motors that are not suitable for reuse, remanufacturing or refurbishment, shall be removed where the process for removal is feasible to be performed by authorised treatment facilities without excessive cost. In case of lack of technical progress to recycle NdFeB permanent magnet materials, the e-drive motors or its permanent magnet material containing parts shall be stock-piled and labelled in accordance with Article 28(1), point (b), of Regulation (EU) 2024/1252. For the purpose of future recycling, the requirements related to the temporary storage of Directive 1999/31/EC shall not apply.

6. Removed electronic components and parts, which are not subject for reuse, remanufacturing or refurbishment and non-ferrous fractions, including shredded printed circuit boards, shall be treated by treatment operators as specified in Article 8(3) of Directive 2012/19/EU.

7. Removed glass from the end-of-life vehicle, as a minimum, shall be recycled into container glass, fibre glass, or equivalent quality.

8. Removed refrigerants shall be recycled, reclaimed or destroyed in accordance with Article 8 of Regulation (EU) 2024/573.

9. The plastics and residue fractions shall be handled in accordance with Article 7 of, and Annex IV to, Regulation (EU) 2019/1021.

10. Rubber tyres shall be processed in accordance with the waste hierarchy and the general requirements laid down in Article 4 of Directive 2008/98/EC to prioritise prevention options that deliver the best overall environmental outcome including retreading, and prioritise recycling, including other methods than mechanical recycling, over energy recovery.

11. Aluminium materials originating from heat exchangers as specified in Part C, point 17, of Annex VIII shall be stored and recycled separately from the cast and wrought aluminium fractions specified in Part G, point 2(b), of Annex VIII.

PART G

CRITERIA FOR COMBINED SHREDDING AND THE APPLICATION OF POST-SHREDDER TECHNOLOGIES

1. In order to comply with Article 27(3) of this Regulation, end-of-life vehicles may be shredded together with other waste only if:

(a) waste electrical and electronic equipment has been treated selectively in accordance with Annex VII to Directive 2012/19/EU;

(b) all batteries have been removed in accordance with Regulation (EU) 2023/1542;

(c) plastic packaging has been separated from packaging waste and metal packaging in accordance with Regulation (EU) 2025/40;

(d) the combined shredding process does not lower the quality of waste streams compared to separate treatment; and

(e) the specific contributions of each mixed waste stream to the output fractions can be identified as fulfilling the reporting obligations under Regulation (EU) 2023/1542, Regulation (EU) 2025/40, Directive 2008/98/EC and Directive 2012/19/EU .

2. Quality requirements for the output fractions:

(a) the total copper content of the main steel fraction shall not exceed 0,25 % on a weight basis; as from … [the first day of the month following 60 months from the date of entry into force of this Regulation], the total copper content of the main steel fraction shall not exceed 0,15 % on a weight basis;

(b) by … [the first day of the month following 36 months from the date of entry into force of this Regulation], aluminium shall be sorted as a minimum into two fractions:

(i) cast aluminium (fractions with a silicon content higher than 1,5 %);

(ii) wrought aluminium (fractions with a silicon content equal or lower than 1,5 %);

(c) by … [the first day of the month following 72 months from the date of entry into force of this Regulation], aluminium shall be sorted as a minimum into four fractions:

(i) aluminium fraction with silicon content higher than 1,5 %, copper content equal or lower than 0,5 % and iron content equal or lower than 0,2 %;

(ii) aluminium fraction with silicon content higher than 1,5 % and that does not meet the composition requirements of subpoint (i). for copper and iron;

(iii) aluminium fraction with silicon content equal or lower than 1,5 %, magnesium equal or lower than 1,5 %, copper content equal or lower than 0,3 % and zinc content equal or lower than 0,3 %;

(iv) aluminium fraction with silicon content equal or lower than 1,5 % and that does not meet the composition requirements of subpoint (iii) for magnesium, copper and zinc;

(d) The shredder heavy fraction derived after air separation and separation of iron, shall be further treated with the aim to separate ferrous metals, non-ferrous metals, plastics and other organic materials for recycling or recovery. The residue of these processes shall contain less than 1 % of metal content by weight and, in accordance with Council Decision 2003/33/EC, less than 5 % of total organic carbon by weight; the Total Organic Carbon (TOC) limit of < 5 % by weight does not apply if the shredder heavy fraction properly selected and reconditioned, is biologically stable according to current legislation;

(e) the shredder light fraction shall be further treated with the aim to separate ferrous metals, non-ferrous metals, plastics and other organic materials for recycling or recovery; the residue of these processes shall contain less than 1 % of metal content by weight and, in accordance with Decision 2003/33/EC, less than 5 % of total organic carbon by weight; the Total Organic Carbon (TOC) limit of < 5 % by weight does not apply if the shredder light fraction, properly selected and reconditioned, is biologically stable, according to current legislation.

3. Documentation to be provided for exemptions from the obligation to remove parts, components and materials:

(a) where available, a copy of the written contract between the authorised treatment facility and the facility which performs the shredding operations and ▌ uses the postshredding technologies, including the specifications on the quality of the secondary materials ready for recycling and the technical specification followed in processing treatment fractions from end-of-life vehicles;

(b) a mass balance report of the sample analysis on the quality and quantity of the treatment fractions (output) for a representative treatment configuration provided by an independent body.

▌

ANNEX IX

INFORMATION FOR REGISTRATION IN THE REGISTER OF PRODUCERS

1. Information to be submitted by the producer or its authorised representative for extended producer responsibility:

(a) name, and brand names if available, under which the producer operates in the Member State and address of the producer, including postal code and place, street and number, country, telephone number, if any, website and e-mail address, indicating a single contact point;

(b) national identification code of the producer, including its trade register number or equivalent official registration number and the European or national tax identification number;

(c) categories of vehicles that the producer intends to make available on the market for the first time within the territory of a Member State;

(d) information on how the producer meets its responsibilities laid down in Article 16, including information in written form on the following:

(i) the measures put in place by the producer to fulfil the producer responsibility obligations laid down in Articles 16 and 20;

(ii) the measures put in place to fulfil the collection obligation laid down in Article 23 with regard to the amount of vehicles the producer makes available on the market in the Member State; and

(iii) the system to ensure that the data reported to the competent authorities are reliable;

(e) a statement by the producer or, where applicable, producer’s authorised representative for the extended producer responsibility or producer responsibility organisation, stating that the information provided is true.

2. Information to be provided, in addition to the information listed in point 1, where a producer responsibility organisation is appointed to carry out the extended producer responsibility obligations:

(a) the name and contact details, including postal code and place, street and number, country, telephone number, web and e-mail address and the national identification code of the producer responsibility organisation;

(b) the trade register number or an equivalent official registration number and the European or national tax identification number of the producer responsibility organisation; and

(c) the represented producer’s mandate.

3. Information to be provided, in addition to the information listed in point 1 by the producer responsibility organisation where it has been appointed in accordance with Article 17(1):

(a) the names and contact details, including postal codes and places, streets and numbers, countries, telephone numbers, websites and e-mail addresses of the producers represented;

(b) the mandate of each represented producer, where applicable;

(c) where the producer responsibility organisation represents more than one producer, it shall indicate separately how each one of the represented producers meets the responsibilities set out in Article 16.

4. Where obligations under Article 16 are fulfilled on a producer’s behalf by an appointed representative for the extended producer responsibility that represents more than one producer, that representative shall, in addition to the information listed in point 1, provide the name and the contact details for each of the represented producers separately.

ANNEX X

CERTIFICATE OF DESTRUCTION ▌

ANNEX XI

AMENDMENTS TO REGULATION (EU) 2018/858 AND REGULATION (EU) No 168/2013

1. Annex II to Regulation (EU) 2018/858 is amended as follows:

(a) In Part I, entry G13 is replaced by the following:

‘

’;

(b) Appendix 1 is amended as follows:

(i) in table 1, entry G13 is replaced by the following:

‘

’;

(ii) in table 2, entry G13 is replaced by the following:

‘

’;

(c) in Appendix 2, point 4 is amended as follows:

(i) in the table ‘Part I: Vehicles belonging to category M1’, entry 59 is replaced by the following:

‘

’:

(ii) in the table ‘Part II: Vehicles belonging to category N1’, entry 59 is replaced by the following:

‘

’;

(d) Part III is amended as follows:

(i) In Appendix 1, entry 59 is replaced by the following:

‘

’,

(ii) in Appendix 2, entry 59 is replaced by the following:

‘

’;

(iii) in Appendix 3, entry 59 is replaced by the following:

‘

’;

(iv) in Appendix 4, entry 59 is replaced by the following:

‘

’;

2. Annex II to Regulation (EU) No 168/2013 is amended as follows:

In Section C1 of the table, entry 15a is replaced by the following:

‘

’.

ANNEX XII

AMENDMENTS TO REGULATION (EU) 2023/1542

The table in Annex I is replaced with the following table:

1 Systems that have a voltage of > 75 V DC as provided for in Article 1 of Directive 2014/35/EU of the European Parliament and of the Council.

ANNEX XIII

CRITERIA TO BE FULFILLED BY INSTALLATIONS IN THIRD COUNTRIES CARRYING OUT PRODUCTION OF RECYCLED MATERIAL

Part A CRITERIA TO DEMONSTRATE THAT RECYCLED MATERIAL HAS BEEN PRODUCED IN AN INSTALLATION THAT MEETS CERTAIN REQUIREMENTS FOR THE PROTECTION OF HUMAN HEALTH, CLIMATE AND ENVIRONMENT SET OUT IN UNION LAW OR EQUIVALENT TO THOSE REQUIREMENTS (IN ACCORDANCE WITH ARTICLE 6(4))

1. The installation located in a third country involved in the production of recycled material shall fulfil the following conditions in its actual operations:

(a) it complies with the requirements to recycle waste and carries out its activities in accordance with the applicable national legislation on environmental protection;

(b) it is designed, constructed and operated in a safe and environmentally sound manner and, in particular, it has the required processes, appropriate waste management technology, organisation and infrastructure in place to recycle the waste in question;

(c) it sources its plastic waste from a Member State or a country which complies with Union law or equivalent standards as the Member States in terms of protection of the environment and the safety of workers and operates in such a country in accordance with the criteria defined in paragraph 3;

(d) it establishes and operates management and monitoring systems, procedures and techniques that have the purpose of preventing, reducing, minimising and to the extent practicable eliminating:

(i) health and safety risks to workers concerned and to the population in the vicinity of the facility; and

(ii) adverse effects on the environment caused by its activities (in particular through adequate measures taken to monitor and address pollution);

(e) it ensures the traceability of all waste received and treated at the facility, including ensuring that all residual waste generated from its activities are documented and are only transferred to waste management facilities that are authorised to treat such residual waste;

(f) it has taken measures designed to save energy and limit the emissions of greenhouse gases linked to its activities;

(g) it establishes and is able to provide records of its waste management activities for the last five years; if an installation has operated for less than five years, it establishes and is able to provide records of its waste management activities for the time it has operated;

(h) its operator or the management thereof have not been convicted of having carried out illegal activities linked to waste management in the last five years.

2. The following or equivalent rules shall be taken into account, as a point of reference and where relevant:

(a) specific requirements for the treatment of certain waste and on the calculation of the quantity of waste treated, which are mandatory under Union legislation, and on the accounting of the quantities of recycled materials produced;

(b) the Best Available Techniques conclusions adopted for certain activities under Directive 2010/75/EU.

3. The plastic waste shall be treated in a manner according to requirements set out in Union law or equivalent to those requirements and shall come from a Member State or country with a comprehensive waste management framework covering its entire territory and demonstrating its ability and willingness to guarantee environmentally sound waste management, taking into account in particular the following criteria:

(a) the measures implemented and planned to ensure the environmentally sound management of waste within its territory, such as the introduction of an extended producer responsibility scheme or an equivalent system implementing the polluter pays principle;

(b) the measures implemented and planned to increase the proportion of postconsumer plastic recycled from vehicles, and the indicators for monitoring these measures;

(c) the measures implemented and planned to increase the proportion of post-consumer recycled plastic incorporated in vehicles placed on the national market, and the indicators for monitoring these measures.

Part B CRITERIA TO DEMONSTRATE THAT RECYCLED MATERIAL HAS BEEN PRODUCED IN COMPLIANCE WITH THE REQUIREMENTS IN ARTICLE 6(1), (2) AND (3)

The installation located in a third country involved in the production of recycled material shall fulfil the following conditions in its actual operations:

1. The installation shall be able to provide evidence that it is producing materials recycled from post-consumer waste. If the installation is also producing materials derived from pre-consumer waste or derived from raw materials, it shall be able to demonstrate that it clearly distinguishes between the different types of materials. The installation shall ensure that it is only supplying materials recycled from post-consumer waste, as a condition for this material to be accounted for as part of the targets set out in Article 6;

2. An installation producing recycled materials from post-consumer waste derived from end-of-life vehicles or repaired vehicles shall be able to demonstrate that such waste has been collected separately and was not mixed with materials from other origins in such a way that would prevent traceability of this waste before its arrival on the installation and during the whole recycling process.

ANNEX XIV

REQUIREMENTS FOR AUDITS, CERTIFIERS AND AUDITORS

Part A DETAILED REQUIREMENTS FOR THIRD PARTIES CONDUCTING AUDITS

1. A third party conducting audits of the installation located in a third country in accordance with Article 6(5) shall be independent of the supplier, manufacturer or the person involved in the production of the recycled material and of the controlled installation. To that end, the third party shall be able to document that:

(a) it is not part of or under the control of these entities;

(b) it has established and operates procedures guaranteeing its impartiality, including:

(i) assessment of risks of its impartiality on an ongoing basis;

(ii) identification, elimination and mitigation of risks to impartiality resulting from financial, commercial and other types of pressure;

(iii) assessment of risk of its impartiality resulting from relationships of its personnel;

(c) it is structured and managed in a way ensuring its independence and impartially, including:

(i) it is clearly identifiable within the legal entity, if the legal entity conducts also activities not related to audits;

(ii) it has reporting rules on the performed audit activity;

(iii) its personnel has clearly identifiable responsibilities with respect to conducting audits.

2. A third party conducting audits in accordance with Article 6(5) shall be considered to have appropriate qualifications in the area of audits and waste treatment if it has a sufficient number of qualified personnel, directly or via subcontracting, that is regularly trained and if its personnel involved in conducting such audits has documented professional experience in all of the following areas:

(a) conducting audits of facilities treating waste;

(b) waste treatment operations;

(c) environmental and occupational health and safety management systems;

(d) production of recycled material.

3. In order to demonstrate compliance with the criteria referred to in points 1 and 2 of this Part, the third party that conducts an audit or certification shall refer to its certification with Union or equivalent internationally recognised standards relevant for the conduct of audits, such as international standard ISO 19011:2018 or ISO/IEC 17020:2012.

Part B. SUBJECT OF THE AUDIT

1. The audit referred to in Article 6(5) shall verify that the installation located in a third country involved in the production of recycled material fulfils the conditions listed in Annex XIII in its actual operations.

2. The names and contact details of the individuals who carried out the audits shall be clearly indicated in the audit reports.

ANNEX XV

CORRELATION TABLES

1. Directive 2000/53/EC

2. Directive 2005/64/EC

_________________